OEM Manufacturer STEEL DISC to Israel Manufacturer
Short Description:
Diameter up to 1.200 mm (smaller dias correspondingly thicker) Thickness up to 600 mm
OEM Manufacturer STEEL DISC to Israel Manufacturer Detail:
Diameter | up to 1.200 mm (smaller dias correspondingly thicker) |
---|---|
Thickness | up to 600 mm |
Product detail pictures:
OEM Manufacturer STEEL DISC to Israel Manufacturer, The product will supply to all over the world, such as: , , ,
We are one of the leading custom made exhaust producers based in the Nethelands
Our cutting edge stainless steel exhausts are designed and engineered for almost all cars, vans and trucks.
We provide high performance exhaust systems, mufflers, silencers, cutout systems, active sound systems, race catalytic converters, OBD chiptuning, etc
The key to this jig is a piece of 1/8″ square wire, which is roughly centered on the outside of the jig. The wire could actually be round and anywhere from 1/8″ to 3/16″ for this job. The idea is to push the inside wall of the tubing in, and once it’s going the right direction, it will take care of itself. Without the wire or something even more elaborate, you won’t be able to bend this material tighter than about 15″ radius without kinking.
If you look closely, you might notice that the straight part of the tube that I’m bending from ends up slightly curved also. If this is a problem, you can overbend the material slightly, and then carefully unbend the side that you used as a lever. But if it has to be perfect, then go buy a big expensive machine.
Oh, and doing this sort of thing is why I now have arthritis.
For more info on hand bending, see https://www.metalgeek.com/bend
By from -
By from -