Manufactur standard STEEL BLOCK to Muscat Factory

Homemade metal-working roller for flat bar, round stock, square stock and some pipe. For making hoops, rings and scroll-work from copper, steel, aluminium, etc. I was surprised how easy this was to make. I did have the old car scissor jack and the scaffolding pipe so all it cost me was the castor wheels. I wish I’d made one years ago!

I made this for the horsedrawn hearse project I’m working on. More on that soon.

I used 1″ wide castor wheels because that was the width of the stock I was using, but the bigger wheels are readily available and much stronger. I really think you could use this design for pipe and flat that’s way bigger than you see in this film. I want to build a bigger one sometime and make my own polytunnel hoops.

Of course, it you’re using long or heavy lengths, you will have to support the ends or it will bend. But the same is true for rollers that work horizontally. And most pipe needs to have concave rollers or it will flatten. I will have to work on those.. : – )

Here’s our online store where you can see some of the craft things we make and sell..

https://www.wayoutwestemporium.com/

and here’s our Patreon page..

https://www.patreon.com/user?u=2761318&ty=h

ORDER HERE : https://goo.gl/FPvdnF

Sectional Silver Puma Sewer Rods for Hand Rodding or your Rodding Machine

These are the Highest quality rods you can buy, Made to exacting standards, they have been in use in sewers world-wide for more than 60 years. Made from the finest high tensile Spring steel, they are induction tempered for uniformity and close tolerances. 5/16” rods are .3165 diameter for the extra toughness you need. The Silver rods are slightly less hard for a bit more flexibility where needed. The 3/8” rods are .362” diameter. Available in many lengths you can choose what your sewer rodding machine needs. For Rodders made by Sreco or Sewer Equipment Co. of America, they will either be 36”, 39” is the most common and in some cases 48”. Each coupling is right hand x left hand, so as you are corkscrewing in the sewer you are always tightening the nuts. Our rods are 100% guaranteed, no questions asked. Outer coating is an acid resistant, heat fused, blue metallic coating and the couplings are zinc plated and baked to prevent hydrogen embrittlement. Our rods will couple up to like rods of other manufacturers. Tensile strengths are form 220,000 – 230,000 psi. For the Best rods ask for Puma quality.