Factory Cheap Hot STEEL PLATE for Eindhoven Factory
Short Description:
From 30 x 25 mm to 2.000 x 600 mm (in case of a smaller width correspondingly thicker)
Factory Cheap Hot STEEL PLATE for Eindhoven Factory Detail:
From 30 x 25 mm to 2.000 x 600 mm
(in case of a smaller width correspondingly thicker)
Product detail pictures:
Factory Cheap Hot STEEL PLATE for Eindhoven Factory, The product will supply to all over the world, such as: , , ,
For more information about various high quality Steel&Iron,please email via galvanizedsteelchina@gmail.com
Browse our HaoRong Steel&Iron Channel at https://www.youtube.com/channel/UCtMObgVqtaRCUk5IxIxF2JA
Call us via:0086-15222035715
Type
Deformed Steel Bar
Standard
Grade
a. GB1499.2-2007, HRB335, HRB400, HRB500 and etc.
b. ASTM A615 Gr.40, Gr.60 and etc.
c. BS4449/2005, B500A,B500B and etc.
d.KSD3504:2011,SD 400,SD500 and etc.
Diameter
8mm-40mm .
Length
6m, 8m, 9m,12m optional for customer to choose
Application
construction industry with all types of reinforced concrete structures and etc
Packing
in bundles,standard export packing, or as per customers’ requirement
Quality
Top quality
Delivery time
20-30 days on receipt of the advance payment or formal L/C
1. All the production process are made under the ISO 9001:2001 strictly
2. Our products conform to all the standards,have been exporting to many countries.
3. As we are manufacturer,we can offer products as per customer’s request.
4. We can offer the original mill test certificate and and other documents as required.
Metalwork | Modern technology of steel rolling mill – Technology solutions.
Rolling, in technology, the principal method of forming molten metals, glass, or other substances into shapes that are small in cross-section in comparison with their length, such as bars, sheets, rods, rails, girders, and wires. Rolling is the most widely used method of shaping metals and is particularly important in the manufacture of steel for use in construction and other industries. Rolling may be done while the steel is hot (hot-rolling) or cold (cold-rolling). The process consists of passing the metal between pairs of rollers revolving at the same speed but in opposite directions and spaced so that the distance between them is slightly less than the thickness of the metal. The degree of change that can be made in the thickness of the steel depends on its temperature, with higher heat increasing the plasticity of the steel. Cold-rolling, in which unheated bars, sheets, or strips of steel are sent through the rollers, usually requires several rollings to achieve the desired shape. Cold-rolling often follows hot-rolling and is done to gain better mechanical properties, better machinability, special size, a bright surface, or a thinner gauge than hot-rolling can.
By from -
By from -
