Reliable Supplier STEEL DISC to Grenada Factory
Short Description:
Diameter up to 1.200 mm (smaller dias correspondingly thicker) Thickness up to 600 mm
Reliable Supplier STEEL DISC to Grenada Factory Detail:
Diameter | up to 1.200 mm (smaller dias correspondingly thicker) |
---|---|
Thickness | up to 600 mm |
Product detail pictures:
Reliable Supplier STEEL DISC to Grenada Factory, The product will supply to all over the world, such as: , , ,
Mig Welding Technique for horizontal and flat laps and tees by–
https://www.weldingtipsandtricks.com/mig-welding-technique-horizontal.html
I learned this mig welding technique over 20 years ago and have gotten a lot of mileage out of it. I use it for almost everything because it is simple and it works. What more could you ask for?
For more Down and Dirty mig welding tips, click on the link and you will see a pantload of good tips.
Go ahead.
A reinforced concrete column is a structural member designed to carry compressive loads, composed of concrete with an embedded steel frame to provide reinforcement. For design purposes, the columns are separated into two categories: short columns and slender columns.
Reinforcement detailing of footing is as much important as site investigation for the type of footing and structural design of footing
Placing reinforcement onto layers of fresh concrete or adjusting the position of bars or welded wire reinforcement during concrete placement should not be permitted. The ill-advised practice in slab construction of placing reinforcement on the subgrade and pulling it up during concrete placement is called “hooking.”
placing of reinforcement is very important process in civil engineering
By from -
By from -