Europe style for ROUND BAR to Casablanca Importers
Short Description:
Length Up to 16,000 mm Diameter Max 1,200 mm
Europe style for ROUND BAR to Casablanca Importers Detail:
| Length | Up to 16,000 mm |
|---|---|
| Diameter | Max 1,200 mm |
Product detail pictures:
Europe style for ROUND BAR to Casablanca Importers, The product will supply to all over the world, such as: , , ,
https://www.learningconstruction.com Step by Step Tutorials:
A concrete slab is a common structural element of modern buildings. Horizontal slabs of steel reinforced concrete, typically between 100 and 500 millimeters thick, are most often used to construct floors and ceilings, while thinner slabs are also used for exterior paving.
In many domestic and industrial buildings a thick concrete slab, supported on foundations or directly on the subsoil, is used to construct the ground floor of a building. In high rise buildings and skyscrapers, thinner, pre-cast concrete slabs are slung between the steel frames to form the floors and ceilings on each level.
On the technical drawings, reinforced concrete slabs are often abbreviated to “r.c.slab” or simply “r.c.”.
In situ concrete slabs are built on the building site using formwork – a type of boxing into which the wet concrete is poured. If the slab is to be reinforced, the rebars are positioned within the formwork before the concrete is poured in. Plastic tipped metal, or plastic bar chairs are used to hold the rebar away from the bottom and sides of the form-work, so that when the concrete sets it completely envelops the reinforcement.
Have you ever tried to cut multiple pieces of round bar in a horizontal bandsaw? A small modification to your stationary jaw and you can easily and safely cut more than one. This video shows my setup that easily cuts 5 bars at a time.Take a look.
By from -
By from -
