High quality factory STEEL DISC for Orlando Factories
Short Description:
Diameter up to 1.200 mm (smaller dias correspondingly thicker) Thickness up to 600 mm
High quality factory STEEL DISC for Orlando Factories Detail:
Diameter | up to 1.200 mm (smaller dias correspondingly thicker) |
---|---|
Thickness | up to 600 mm |
Product detail pictures:
High quality factory STEEL DISC for Orlando Factories, The product will supply to all over the world, such as: , , ,
Study of the Bauschinger effect on a sample of 4340 steel. Test consists in cyclic tensile and compression stresses on the material. The machine used for the test is an Instron and a extensometer sensor attached to the sample has been used to accurately measure the deformation of the sample through the relevant section. As this is the end of the test, the extensometer has been detached before the sample breaks and potentially damages the sensor. The midle section of the sample is so thin anyway that any deformation happening away from it is negligible.
https://skylots.org/lot.php?id=6537733552
длиной лезвия: 9,5 см, РК: 10 см
полная длина: 20 см
Лезвие толщиной (сведение): 3,8 (0,8) мм
Вес: 200 (245) грамм
Ножны: кожа
Материал лезвия: Stahl AISI 420
Материал рукояти: G10
Твердость стали 55-57 HRC
Made in China.
By from -
By from -