Europe style for ROUND BAR to Casablanca Importers
Short Description:
Length Up to 16,000 mm Diameter Max 1,200 mm
Europe style for ROUND BAR to Casablanca Importers Detail:
| Length | Up to 16,000 mm |
|---|---|
| Diameter | Max 1,200 mm |
Product detail pictures:
Europe style for ROUND BAR to Casablanca Importers, The product will supply to all over the world, such as: , , ,
* i-Center indexable center drill
The world’s first indexable center drill.
Shortens set up and center drilling time.
Increases tool life, which reduces tooling cost.
NC2033: K20F grade carbide insert and TiAlN coated for carbon steel, alloy steel, high alloy
steel, cast iron and Al, Al-alloy, Cu, Cu-alloy.
2 cutting edges, high performance for center drilling.
Metric sizes: DIN 332 A+B, DIN 332 R , Ø1~Ø10 mm
Inch sizes: ANSI (BS) #2 ~10
Special inserts are available on request
* High Speed, High Feed Rate
High Performance speed and feed can be achieved due to the specially ground
insert and rigid holder design. For example, for drilling Ø3.15mm hole on alloy steel, running at 6000 r.p.m. and feed rate 600mm/min. (0.1mm/rev.)
* Easy Tool Length Setting
The axial position accuracy of the insert is 0.05mm ( .0 0 2″) . It is not necessary to reset
the tool length when changing insert or cutting edge.
* Excellent Repeatability
The insert is securely positioned by two locating
pins and clamped by one insert screw at the center.
The positioning repeatability of the insert is within 0.02 mm(.0008″) in radial direction,
thus ensuring conformity to any national standard.
* Extended Tool Life
Coolant can be supplied
through the center of the holder to increase performance and
extend tool life. Insert geometry, grades and coating process
are specifically engineered for centering applications.
* Universal and Easily Fitted with Any Available Shank
The tool holder is made of high alloy steel, hardened and ground to h6 tolerances
with a flat. It’s easy for both stationar y and rotating tools.
————————————————————————————————————————
Nine9 Indexable Engraving Tool
This is a revolutionary new concept of engraving tools with indexable carbide inserts.
They offer you the ability to produce HIGH QUALITY ENGRAVING in most materials.
The latest coated carbide grades help you to obtain higher speed and feed rate,
dramatically reducing your cycle time.
Main Features
• High Positive Rake Angle
Indexable insert.
Suitable for engraving all types of materials,
such as plastic, non-ferrous metal, aluminum, carbon steel and stainless steel.
• Multi-Side Grinding
Full peripherally ground insert to ensure effi cient repeatability.
It performs excellently without producing any burrs,
especially in aluminum and stainless steel.
• High Speed, High Feed Rate
Designed to run at high speed, up to 20000 r.p.m.
Feed rate 0.08mm (0.003″) / rev. apply to aluminum;
0.05mm (0.002″) / rev. apply to stainless steel.
Reduces engraving cycle time!
• Economical
Each indexable insert has 2 cutting edges.
No resharpening required. Tool length is unchanged.
No need to reset after changing insert or cutting edge.
Excellent repeatability!
• Applications
Universal for marking number and almost any character.
45° , 60° engraving inserts which can be used for marking serial numbers ;
product codes ; dial scales ; signs ; logo outlines and almost any character
which can be created by the NC programming system.
Make your own gear blanks at virtually no cost. This video shows how. For a full descriptrion on how to make spur gears on a lathe, visit https://users.picknowl.com.au/~gloaming_agnet/cq9325rev7.html
For information on the lathe being used in the video visit my blog at:
https://users.picknowl.com.au/~gloaming_agnet/cq9325rev.html
To make more than one gear increase the depth of alloy in the tin can, and after machining the metal slug to the correct external diameter, slice gear blanks off with a parting off blade.
By from -
By from -
