2017 New Style STEEL TUBE to Czech republic Manufacturers

Caron is creating a sculpture for which he needs a 70″ ring made of 1/2″ solid round stock – he’s drawn an outline of the ring on his rising workbench. He decided to use his pipe roller to make the ring, but someone asked why he was using a pipe roller to roll solid metal rod when he has a stock bender (also known as a Chinese pipe bender), which is what you usually use for this job.

He shows a section of the 1/2″ metal rod he is using. Next Caron show one of the rollers from the stock bender. Because the roller is flat, if he uses the stock bender, the bend can become jerky and the whole ring might be wavy, rather than flat. Caron bends the small section of rod to show what can go wrong.

So Caron gets out his pipe bender. He shows one of the pipe bender’s stock rollers, and how it cradles the pipe, which stays within its channel. If you try to put something too small in that kind of die, though, you’re going to create ripples instead of the metal coming out perfectly round and straight.

He doesn’t have a roller small enough to fit the 1/2″ rod, but he does have a square roller for working with square hollow metal stock or square solid stock that’s close enough in size to fit the 1/2″ rod. So he can run the round stock through the square die and it will still come out straight, as he demonstrates.

So that’s why he’s using the wrong machine with the wrong dies to do the job – because that’s what he has on hand, and it will actually do the job.

Now it’s time for Caron to go back to work. We get to see a photo of how he used the ring for his sculpture Portal ( http:;//www.kevincaron.com/art_detail/portal.html ). The sculpture will look a lot different when it is completed – the ring will be one of the things that will disappear. While you’re on Caron’s site, you can see hundreds more how-to videos and Caron’s other wild work.

When you’re way off the beaten path the last thing you should worry about is how you’re getting home. Introducing Rough Country’s Forged Adjustable Track Bar for Jeep TJ. This massive 16lb Track Bar is nearly twice the weight of your factory Track bar, offering you unparalleled support and the ultimate peace of mind in any driving situation.

For those who are serious about flexing, crawling, and pushing your Jeep to the limits, Rough Country’s Forged Adjustable Track Bar is a must. This new track bar is made of forged steel and features rubber Clevite bushings and a beefy construction that will dwarf stock equipment. The provided bracket converts the mounting point to an eyelet style for a wider range of motion. This design allows the bar to keep your axles tame even under pure off-road torture.

Best of all, it’s simple to install and fully adjustable on the vehicle; meaning no removal required, no trial and error lining it up, and no more wasted time just to center your axle. All Rough Country forged Track Bars ship with a Lifetime Replacement Warranty.

Get yours at:

https://www.roughcountry.com/forged-adjustable-track-bar-1042.html

https://www.roughcountry.com/forged-adjustable-track-bar-1044.html

https://www.roughcountry.com/forged-adjustable-track-bar-1052.html

Like us on Facebook: https://facebook.com/roughcountry
Follow us on Instagram: https://instagram.com/roughcountry
Follow us on Twitter: https://twitter.com/roughcountry
And check out our web site at https://roughcountry.com