2 Years’ Warranty for STEEL TUBE to Las Vegas Manufacturer
Short Description:
Inner diameter 160 mm to 600 mm Length up to 1,200 mm Weight up to 10.000 kg
2 Years’ Warranty for STEEL TUBE to Las Vegas Manufacturer Detail:
| Inner diameter | 160 mm to 600 mm |
|---|---|
| Length | up to 1,200 mm |
| Weight | up to 10.000 kg |
Product detail pictures:
2 Years’ Warranty for STEEL TUBE to Las Vegas Manufacturer, The product will supply to all over the world, such as: , , ,
RECEIVE PARTS IN GONDOLA, ROTATE, METER FLOW CONVEY, ORIENT/RECIRCULATION CONVEY AND CHUTE GEAR BLANKS, SPECTRUM AUTOMATION COMPANY SERIAL #6231 & #6232
In this second part of the cutter finish – versus – heat treated 4140 CrMo Steel, I take a look at the effects of a deeper depth of cut with my negative rake and positive rake cutters. This video was motivated by comment by the Veteran Bicycle Co. I recommend you check them out. They have my thanks.
This is a video where I look at the effect on lathe cutting 4140 steel in its annealed, heat treated, and tempered states. I use a ceramic kiln, but similar effects can be done with a torch and a ceramic blanket. You can see just how hard it is to cut 4140 cleanly in my video on the Safety Drawbar. I finally had to resort to sandpaper to get a decent finish.
Please Note: I am a beginning machinist and I do not pretend to know everything. Please always operate machinery in a safe manner and if you don’t know, find a reliable source. DO NOT COPY ME. I make a lot of mistakes. I provide these videos for entertainment only.
By from -
By from -
