Top Quality AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Manufacturer in Moldova

Top Quality
 AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Manufacturer in Moldova

Short Description:

AISI 8620 Steel is a low alloy nickel, chromium, molybdenum case hardening steel,generally supplied in the as rolled condition with a maximum hardness HB 255max. SAE steel 8620 offers high external strength and good internalstrength, making it highly wear resistant. AISI 8620 steel has a highercore strength than grades 8615 and 8617. SAE 8620 alloy steel isflexible during hardening treatments, thus enabling improvement ofcase/core properties. Pre hardened and tempered (uncarburized) 8620 ca...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    The company upholds the philosophy of "Be No.1 in quality, be rooted on credit and trustworthiness for growth", will continue to serve old and new customers from home and overseas whole-heatedly for Top Quality AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Manufacturer in Moldova, We are confident to make great achievements in the future. We are looking forward to becoming one of your most reliable suppliers.


    AISI 8620 Steel

    is a low alloy nickel, chromium, molybdenum case hardening steel,
    generally supplied in the as rolled condition with a maximum hardness HB

    255max. SAE steel 8620 offers high external strength and good internal
    strength, making it highly wear resistant. AISI 8620 steel has a higher
    core strength than grades 8615 and 8617.

    SAE 8620 alloy steel is
    flexible during hardening treatments, thus enabling improvement of
    case/core properties. Pre hardened and tempered (uncarburized) 8620 can
    be further surface hardened by nitriding but will not respond
    satisfactorily to flame or induction hardening due to its low carbon
    content.

    Steel 8620 is suited for applications which require a
    combination of toughness and wear resistance. This grade is commonly
    supplied in round bar.

    1. AISI 8620 Steel Supply Range

    8620 Round Bar: diameter 80mm – 1200mm
    8620 Steel Plate: thickness 10mm – 1500mm x width 200mm – 3000mm
    8620 Square Bar: 140mm – 460mm
    8620 tubes are also available against your detailed request.
    Surface Finish: Black, Rough Machined, Turned or as per given requirements.

    2. SAE 8620 Steel Specification and Relevant Standards

    Country

    USA DIN BS BS

    Japan

    Standard

    ASTM A29 DIN 1654 EN 10084

    BS 970

    JIS G4103

    Grades

    8620

    1.6523/
    21NiCrMo2

    1.6523/
    20NiCrMo2-2

    805M20

    SNCM220

    3. ASTM 8620 Steels & Equilvalents Chemical Composition

    Standard Grade C Mn P S Si Ni Cr Mo
    ASTM A29 8620 0.18-0.23 0.7-0.9 0.035 0.040 0.15-0.35 0.4-0.7 0.4-0.6 0.15-0.25
    DIN 1654 1.6523/
    21NiCrMo2
    0.17-0.23 0.65-0.95 0.035 0.035 ≦0.40 0.4-0.7 0.4-0.7 0.15-0.25
    EN 10084 1.6523/
    20NiCrMo2-2
    0.17-0.23 0.65-0.95 0.025 0.035 ≦0.40 0.4-0.7 0.35-0.70 0.15-0.25
    JIS G4103 SNCM220 0.17-0.23 0.6-0.9 0.030 0.030 0.15-0.35 0.4-0.7 0.4-0.65 0.15-0.3
    BS 970 805M20 0.17-0.23 0.6-0.95 0.040 0.050 0.1-0.4 0.35-0.75 0.35-0.65 0.15-0.25

    4. AISI 8620 Steel Mechanical Properties

    • 8620 Physical Properties:

    Density (lb / cu. in.) 0.283
    Specific Gravity 7.8
    Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) 0.1
    Melting Point (Deg F) 2600
    Thermal Conductivity 26
    Mean Coeff Thermal Expansion 6.6
    Modulus of Elasticity Tension 31

    • 8620 Steel Mechanical Properties

    Properties Metric Imperial
    Tensile strength 530 MPa 76900 psi
    Yield strength 385 MPa 55800 psi
    Elastic modulus 190-210 GPa 27557-30458 ksi
    Bulk modulus (typical for steel) 140 GPa 20300 ksi
    Shear modulus (typical for steel) 80 GPa 11600 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30
    Izod Impact 115 J 84.8 ft.lb
    Hardness, Brinell 149 149
    Hardness, Knoop (converted from Brinell hardness) 169 169
    Hardness, Rockwell B (converted from Brinell hardness) 80 80
    Hardness, Vickers (converted from Brinell hardness) 155 155
    Machinability (hot rolled and cold drawn, based on 100 machinability for AISI 1212 steel) 65 65

    5. Forging of Material 8620 Steel

    AISI

    8620 alloy steel is forged at a start temperature of around 2250ºF
    (1230ºC) down to approximately 1700ºF(925ºC.) prior to the hardening
    heat treatment or carburizing. The alloy is air cooled after forging.

    6. ASTM 8620 Steel Heat Treatment

    • Annealing

    AISI

    8620 steel may be given a full anneal by heat to 820℃ – 850℃, and hold
    until temperature is uniform throughout the section and cool in furnace
    or air cooled.

    • Tempering

    Tempering

    of heat treated and water quenched parts of 8620 steels (not
    carburized) is done at 400 F to 1300 F to improve case toughness with
    minimal effect on its hardness. This will also reduce the possibility of

    grinding cracks.

    • Hardening

    The

    AISI steel 8620 will be austenitized at around 840°C – 870°C, and oil
    or water quenched depending upon section size and intricacy. Cool in Air

    or Oil required.

    • Normalizing

    1675ºF

    (910ºC) and air cool. This is another method of improving machinability

    in 8620 material; normalizing might also be used prior to case
    hardening.

    7. Machinability of SAE 8620 Steel

    The

    8620 alloy steel is readily machined after heat treatment and/or
    carburizing, should be at a minimum so as not to impair the hardened
    case of the part. Machining may be done by conventional means prior to
    heat treatment – after carburizing machining is usually limited to
    grinding.

    8. Welding of 8620 Materials

    The
    alloy 8620 may be welded as rolled condition by conventional methods,
    usually gas or arc welding. Preheating at 400 F is beneficial and
    subsequent heating after welding is recommended – consult the approved
    weld procedure for the method used. However, welding in the case
    hardened or through hardened condition is not recommended

    9. Application of ASTM 8620 Steel

    AISI

    8620 steel material is used extensively by all industry sectors for
    light to medium stressed components and shafts requiring high surface
    wear resistance with reasonable core strength and impact properties.

    Typical

    applications are: Arbors, Bearings, Bushings, Cam Shafts, Differential
    Pinions, Guide Pins, King Pins, Pistons Pins, Gears, Splined Shafts,
    Ratchets, Sleeves and other applications where it is helpful to have a
    steel that can be readily machined and carburized to controlled case
    depths.

  • Previous:
  • Next:



  • http://www.DKCKnives.com
    paul@dkcknives.com

    Damascus Folding Knife Damascus Hunting Knife Damascus Bowie Knife Best Survival Knife Groomsmen Gifts Tanto Hunting Knife Tactical Knife

    Knives Come With A Sheath Custom High Quality Double Layers of Hard Genuine Leather. The leather is water proof and has double layers inside. The leather we used to make sheath is Camel, Goat and Buffalo. The leather has been treated with extra process to get the natural looks of snake, alligator, leopard, skins etc, and we tried to matches each sheath cover with the knife handle. Extra work is done on the leather sheath cover to make it colorful, unique and beautiful.
    Collectors Knife Feels Great In Your Hand and Pocket ! Great For Personal Use, Or A Fine Gift DKC KNIVES TM..The Collection You Will Be Proud Of
    Over 320 Layers, 15N20 & 1095 Damascus Mixture of steel and high, low Carbon and HRC approximately 50 to 60. The knife blade is 100% hand forged and is the results of hours of work. The Damascus steel used for this knife was created by forge welding multiple layers of 15N20 & 1095 steel into a solid billet. Heat Treatment: Excellent heat treatment to blade/ oil quenched. Our craftsman use heat treatment and oil quenching to create a perfect blade. The billet of the blade is forged, welded and hand hammered several times and dipped in the motel salt to get the unique patterns.
    To make a custom hand made knife is a skillful art that requires hard work and careful attention. This marvelous knife is very impressive due to its excellent design & detail. We take great pride when designing our knives. The knife is well balanced and has an excellent grip, creating a natural weight and feel when held. Our craftsman put extra work in each knife by carefully designing, carving and hand making it into a breathtaking work of art. There may be slight variations in finish, colors, etc. because they are hand made and variations in natural materials. You are purchasing a knife that will give you many years of great service as well as provide a family heirloom that you can hand down to family members. Please see our full line of knives…we have a fast growing base of knife collectors that eagerly wait for new knife releases. Buy two or three different model DKC KnivesTM and you will see. Our knives are value priced and compare to other custom knives costing two to five times the amount we sell our knives for. Since knives are one of those areas where its possible for fake copies to be made, please be sure to purchase only from SAN FRANCISCO SUPPLY the only authorized factory reseller of DKC Knives. In addition, starting January 1, 2015 most of our knives will have a DKCTM engraving. Look for factory information in your box about knife care. Knives are well boxed, and typically arrive wrapped in plastic with a good coat of oil to protect the knife. When you receive your knife, take a soft cloth and clean off the knife..but as with all steel knives..keep it well oiled to preserve function, look, and beauty. Knives are for responsible adults only. You must be 18 Years or older to purchase this knife. While all our knives are field quality, we do not support or advocate the use of knives for any type of violent activity. We look forward to having you as a long term customer and thanks for purchasing a fine quality knife. THANKS FROM DKC KNIVES !



    This is a search inside of the Nationwide Specialty Alloys Houston warehouse. Because 1985, NSA has been the provider of option for top quality stainless metal, nickel, high temperature and specialty alloy bars and shapes. In addition, NSA supplies a complete array of abilities and methods for a aggressive benefit in an ever transforming, world-wide market.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star