Factory Wholesale PriceList for L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 in Pretoria

Factory Wholesale PriceList for
 L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 in Pretoria

Short Description:

In ASTM A681 standard, L6 steel grade is in L-type for special purpose tool steels. AISI L6 tool steel is in the general class of alloy, oil-hardening tool steel that is characterized by good toughness. ASTM L6 tool steel is suitable for use as tools, dies, and machine parts, which require a good combination of hardness and toughness. Due to its lower carbon content and relatively high nickel content, L6 tool steel has slightly better shock-resistance than more highly alloyed types and shoul...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for Factory Wholesale PriceList for L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 in Pretoria, We sincerely look forward to hearing from you. Give us a chance to show you our professionalism and passion.


    In ASTM A681 standard, L6 steel grade is in L-type for special purpose tool steels. AISI L6 tool steel
    is in the general class of alloy, oil-hardening tool steel that is
    characterized by good toughness. ASTM L6 tool steel is suitable for use
    as tools, dies, and machine parts, which require a good combination of
    hardness and toughness.

    Due to its lower carbon content and
    relatively high nickel content, L6 tool steel has slightly better
    shock-resistance than more highly alloyed types and should be used where
    some wear-resistance can be sacrificed for increased toughness.

    1. Relevant Steel Specification of L6 Tool Steel

    Country USA German Japan British
    Standard ASTM A681 DIN EN ISO 4957 JIS G4404 BS 4659
    Grades L6/T61206 1.2714/55NiCrMoV7 SKT4 BH224/5

    2. AISI L6 Steel Chemical Composition and Steel Equivalents

    ASTM A681 C Mn P S Si Cr V Mo Ni
    L6/T61206 0.65 0.75 0.25 0.80 0.03 0.03 0.10 0.50 0.60 1.20 . . . . . . . . . 0.50 1.25 2.00
    DIN ISO 4957 C Mn P S Si Cr V Mo Ni
    1.2714/55NiCrMoV7 0.50 0.60 0.60 0.90 0.03 0.02 0.10 0.40 0.80 1.20 0.05 0.15 0.35 0.55 1.50 1.80
    JIS G4404 C Mn P S Si Cr V Mo Ni
    SKT4 0.50 0.60 0.60 0.90 0.03 0.02 0.10 0.40 0.80 1.20 0.05 0.15 0.35 0.55 1.50 1.80
    BS 4659 C Mn P S Si Cr V Mo Ni
    BH224/5 0.49 0.57 0.70 1.00 0.03 0.025 . . . 0.35 0.70 1.10 . . . . . . 0.25 0.40 1.25 1.80

    3. ASTM L6 Tool Steel Mechanical Properties

    Steel L6 Physical Properties

    • Modulus of elasticity [103 x N/mm2]: 215

    • Density [g/cm3]: 7.84

    • Thermal conductivity [W/m.K]: 36.0

    • Electric resistivity [Ohm mm2/m]: 0.30

    • Specific heat capacity[J/g.K]: 0.46

    Mechanical Properties of L6 Steels

    Properties Metric Imperial
    Poisson’s ratio 0.27- 0.30 0.27- 0.30
    Elastic modulus 190-210 GPa 27557-30457 ksi

    4. Forging of L6 Tool Steel

    Forge at 1079°C (1975 F) down to 871°C (1600 F). Do not forge below 843°C (1550 F).

    5. AISI L6 Tool Steel Heat Treatment

    Hardening

    Preheating:
    Heat steel L6 at a rate not exceeding 204°C (400°F) per hour (222°C per
    hour) to 621-677°C (1150-1250°F) and equalize. Soak for 30 minutes for
    the first inch (25.4 mm) of thickness, plus 15 minutes for each
    additional inch (25.4 mm).

    Quenching

    Quench L6 tool steel in oil to 66-51°C (150-125°F).

    Tempering

    Temper
    L6 steels immediately after quenching. Hold at temperature for 1 hour
    per inch (25.4 mm) of thickness when tempering at 204°C (400°F), 4 hours
    minimum, then air cool to ambient temperature.
    However, where increased toughness is desired, at a sacrifice of some hardness, higher tempering temperatures are often used.

    AISI L6 steel does not become brittle, as many other die steels do, when tempered in the range of 232°C to 426°C (450 to 800°F).

    To
    minimize the possibility of cracking, the steel should be tempered
    immediately after hardening and should be heated slowly to the desired
    tempering temperature.

    Annealing

    Annealing of steel L6 must be performed after hot working and before re-hardening.

    Heat
    to 760°C (1400°F) and hold one hour per inch of maximum thickness. Then
    cool slowly with the furnace at a rate not exceeding 28°C per hour(50°F
    per hour) to 538°C (1000°F). Continue cooling to ambient temperature in
    the furnace or in air.

    For improved machinability, hold at 760°C
    (1400°F) for 1 hour per inch (25.4mm) of maximum thickness; 2 hours
    minimum. Then cool slowly with the furnace cool from 677°C (1250°F) to
    760°C (1400°F), hold for 8 hours, then air cool to ambient temperature.

    Because of its air-hardening ability, steel L6 should not be normalized.

    6. Machinability of Steel L6

    Machinability
    of tool steel L6 is very good. It rates 90% of the machinability of the
    W-group water hardening low alloy steels rated 100% as a baseline.

    7. Applications of ASTM A681 L6 Tool Steel

    AISI
    L6 cold working tool steel is for general purpose tools and dies where
    greater toughness is required, but with some sacrifice of
    abrasion-resistance.

    Typically used below applications:

    • spindles,

    • forming rolls,

    • punches,

    • blanking and forming dies,

    • trimmer dies,

    • clutch parts,

    • pawls,

    • bearings,

    • chucks parts,

    • rollers,

    • knuckle pins,

    • clutch pins,

    • shear blades

  • Previous:
  • Next:



  • The automated chain backlink creating device is applied for regular chain creating, include things like forming, welding, trimming, calibrating, heating, and so on. The outputted superior power chain applied in lifting, shipping and delivery, mining, and anti-skid, packing, and so on.

    Chain Inbound links Creation line:
    6mm-10mm
    10mm-16mm
    13mm-18mm
    16mm-22mm
    …..

    For a lot more info associated to item welcome to get hold of us

    Email: cncmachinesale@gmail.com
    Skype:cncmachinesale



    Tabletop pneumatic dual head 500ml to 5000ml piston filling machine for 1 gallon gear oil
    fully pneumatic double heads 1gallon flammable liquid filling machinery without electric swithc
    Double heads fully pneumatic liquid filler
    Model YX-F2-500
    filling volume 500-5000ml
    air consumption 300L/min
    Weight 90kg L150xW110xH78
    Full – pneumatic Horizontal Self-suction Ointment Filling Machine For Chemical Industry
    The horizontal self-suction filling machine is suitable for filling products of various viscosity such as water injection and ointment etc.
    It is applied in such industries as daily chemical industry, pharmacy, food and pesticide etc. The semi-automatic piston type filling machine(full-pneumatic) is
    a new generation product developed on the basis of the original electric combined machines. It adopts pneumatic components to replace the electric control circuit.
    Therefore, it is especially suitable for use in damp conditions or conditions with explosion-proof requirements.
    The parts of our LM series products that contact materials are all made of imported 316L stainless steel
    through CNC machine tools with the surface roughness lower than 0.8.
    Principles and characteristics of flammable liquid filling machine without any electric switch fully pneumatic:
    1. The paste filling machine is semi-automatic piston type developed by our company,
    filling a series of high concentrations of fluids. It is through air cylinder to drive a piston and transfer–valve’s
    Three Contacts principle to extract and to split out the highly concentrated material
    by magnetism-reed switch to control air cylinder’s travel, then can adjust the filling volume.
    2. This device is simple and reasonable in structure, easy to
    understand, with high accuracy.
    3. Pneumatic part adopts Germany FESTO and Taiwan AirTac pneumatic components.
    4. Filling volume and filling speed can be arbitrarily adjusted
    with high filling accuracy.
    5. Filling head adopts anti-drip, anti- drawing and lifting devices.
    Technical Parameter of double heads filling machinery:
    Model filling volume Air consumption Net weight Dimensions(mm) S
    YX-F2-15 5-150ml 23L/min 26kg L102xW56xH50
    YX-F2-25 10-250ml 30L/min 40kg L112xW60xH50
    YX-F2-50 10-250ml 44L/min 43kg L118xW64xH52
    YX-F2-100 60-1000ml 87L/min 51kg L130xW72xH52
    YX-F2-250 250-2500ml 160L/min 75kg L142xW80xH70
    YX-F2-500 500-5000ml 300L/min 90kg L150xW110xH78
    Filling speed :20-35 bottles / min / head
    Mark:On the double head machine, both the heads work from two intake hoses, to feed to cylinders, sucking the materials separately
    Our Factory since 1992 has been manufacturing the cosmetic&food making and packaging machinery.In these field we have the experience rich enough to solve the questions encountered by our customers from both home and abroad.
    For more information about penglai packaging, please visit our website at http://penglaipacking.com
    SHENZHEN PENGLAI INDUSTRIAL CORPORATION LIMITED
    Contact:Michael Peng Skype: penglaichina Email: penglaipacking@gmail.com whatsapp:+86-15012795261

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck