Factory wholesale price for Metal Forms Factory for Ethiopia

Factory wholesale price for
 Metal Forms Factory for Ethiopia

Short Description:

Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Ø Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker)             Shafts Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg             Discs, pu...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Factory wholesale price for Metal Forms Factory for Ethiopia, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.


    Steel products can also be divided by their shapes. We can produce in the following shapes:

    Forged bars

    Length up to 16,000 mm
    Round from 80 to 1,200 mm Ø
    Square from 140 mm to 460 mm
    Flat from 30 x 25 mm to 2.000 x 600 mm
    (in case of a smaller width correspondingly thicker)

    [Translate to English:] Geschmiedete Stäbe
               

    Shafts

    Barrel/flange diameter up to 1.600 mm Ø
    Length up to 15.000 mm
    Weight from 10 kg to 35.000 kg

    [Translate to English:] Wellen
               

    Discs, punched discs, hubs

    Diameter up to 1.200 mm
    (smaller dias correspondingly thicker)
    Thickness up to 600 mm

     

     

    [Translate to English:] Scheiben, Lochscheiben, Nabenscheiben
               

    Blocks, plates (forged three-dimensionally)

    Length max. 6.000 mm
    Width max. 1.800 mm
    Thickness max. 1.000 mm
    (in case of smaller thickness greater length and width)
    Weight max. 30.000 kg

     

     

    [Translate to English:] Blöcke, Platten
               

    Forged tubes, cylinders and other hollow forgings

    Inner diameter 160 mm to 600 mm
    Length up to 1,200 mm
    Weight up to 10.000 kg

     

     

    [Translate to English:] Geschmiedete Hohlstäbe, Zylinder
               

    Forged rings

    Outer diameter up to 2.400 mm
    Height up to 2.200 mm
    Weight up to 25.000 kg

    [Translate to English:] Geschmiedete Ringe
               

    Seamless rolled rings

    Outer diameter up to 3.500 mm
    Height up to 800 mm
    Weight 10 kg to 8.000 kg

    [Translate to English:] Nahtlos gewalzte Ringe
              

    We can also produce according to clients' designs. If you have your own design, just feel free to contact us.

  • Previous:
  • Next:



  • FERROUS METALS
    Properties and Uses
    Ferrous metals are alloys containing iron, most are magnetic, though some are only weakly so. The name Ferris comes from the Latin word Iron “Ferrum”.This bike is made of different ferrous metals the muffler is low-carbon steel, the Chains medium carbon steel and the springs are high carbon steel, the brake disc is cast iron the plastic hydraulic lines are protected by braided stainless steel and the fork chrome moly and some of the tools used for making this bike would have been tungsten alloy we are going to look at these different steels and see why they are used for different jobs. In the stone age it took a week to cut down a tree. With the discovery iron a steel X did the job in one hour. Iron had a tremendous impact on lifestyle and food production it was one of the most important changes for mankind today iron is the backbone of the world with built. It is strong plentiful and cheap Iron comes from iron-ore such as hematite, which is similar to rust, it is a combination of iron and oxygen. The oxygen is removed by heating the ore with carbon from coke the carbon removes the oxygen leaving iron but there is still some carbon left and this affects the properties of the iron so the carbon content has to be adjust carefully in a second furnace oxygen is blown through the molten iron the oxygen burns up carbon allowing steelmakers to adjust the amount of carbon. iron and carbon are known as steel.

    CARBON CONTENT
    The carbon content affects the properties.

    We have

    Pure Iron
    Low Carbon Steel(mild steel)
    Medium Carbon Steel
    High Carbon Steel
    Cast Iron

    The low-carbon Steel is soft and easily Scratched the High-Carbon is much harder so High-Carbon Steel can cut Low-Carbon Steel



    See how we helped a client with a cyanide heat treating decontamination and deconstruction problem so they could expand operations.

    To learn more click here: https://www.covanta.com/Our-Solutions/Field-and-Onsite-Services/Field-Services

    Covanta Environmental Solutions | 800-842-9792

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag