Factory supplied M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Manufacturer in Cameroon
AISI M2 Tool Steel is molybdenum based high-speed steel in tungsten–molybdenum series. HSS grade steel M2 is a medium alloyed high speed steel which has good machinability. The H-SS M2 chemical composition gives a good combination of well-balanced toughness, wear resistance and red hardness properties. Widely used for cutting tools such as twist drills, taps, milling cutters, saws, knives etc. Also commonly used in cold work punches and dies and cutting applications involving high speed...
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for Factory supplied M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Manufacturer in Cameroon, We are confident to make great achievements in the future. We are looking forward to becoming one of your most reliable suppliers.
is a medium alloyed high speed steel which has good machinability. The
H-SS M2 chemical composition gives a good combination of well-balanced
toughness, wear resistance and red hardness properties. Widely used for
cutting tools such as twist drills, taps, milling cutters, saws, knives
etc. Also commonly used in cold work punches and dies and cutting
applications involving high speed and light cuts.
Grade M2 High Speed Steel is by far the most popular high speed steel replacing high speed steel gradein most applications because of its superior properties and relative economy.
1. Common M2 Tool Steel Related Specifications and Equivalents
2. ASTM M2 Tool Steel Chemical Composition Properties
|M2 regular C||0.78||0.88||0.15||0.40||0.03||0.03||0.20||0.45||3.75||4.50||1.75||2.20||4.50||5.50||5.50||6.75|
|DIN ISO 4957||C||Mn||P||S||Si||Cr||V||Mo||W|
3. AISI HSS M2 Tool Steel Mechanical Properties
Physical Properties of HSS M2 Material
|Density||0.294 lb/in3 (8138 kg/m3)|
|Modulus of Elasticity||0.294 lb/in3 (8138 kg/m3)|
|Thermal conductivity||24 Btu/ft/hr/°F 41.5 W/m/°K|
|Machinability||65% of a 1% carbon steel|
AISI M2 Tool Steels Properties Mechanical
|Hardness, Rockwell C (tempered at 1150°F, quenched at 2200°F)||62||62|
|Hardness, Rockwell C (as hardened, quenched at 2200°F)||65||65|
|Compressive yield strength (when tempered at 300°F)||3250 MPa||471000 psi|
|Izod impact unnotched (when tempered at 300°F)||67 J||49.4 ft-lb|
|Abrasion (loss in mm3, as-hardened; ASTM G65)||25.8||25.8|
|Abrasion (loss in mm3, tempered at 1275°F; ASTM G65)||77.7||77.7|
|Elastic modulus||190-210 GPa||27557-30458 ksi|
M2 Steels Thermal Properties
|CTE, linear (@20.0 – 100°C/ 68.0 – 212°F)||10 μm/m°C||5.56 μin/in°F|
|CTE, linear (@20.0 – 500°C/68.0 – 932°F)||12.2 μm/m°C||6.78 μin/in°F|
|CTE, linear (@20.0 – 850°C/68.0 – 1560°F)||12.6 μm/m°C||7 μin/in°F|
4. Forging of AISI M2 High Speed Steel
heat M2 HSS steel slowly and uniformly to 850-900°C. The heat should
then be increased more quickly to the forging temperature of
1050-1150°C. If during the forging
the temperature of the M2 high speed tool steel material drops below
880-900°C, re-heating will be necessary. Cool the M2 steel component
very slowly after forging.
5. Heat Treatment of M2 Steel HSS
to 1600° F, soak thoroughly at heat. Furnace cool 25° F per hour to
900° F, air cool to room temperature. Approximate annealed hardness 241
Stress Relief of Unhardened Material: Heat slowly
to 1200 to 1250° F. Soak for two hours per inch of thickness at heat.
Slow cool (furnace cool if possible) to room temperature.
Preheat: Heat slowly to 1550° F, soak thoroughly, heat to 1850° F, soak thoroughly.
time in the furnace varies from a few minutes to a 15 minutes,
depending tool size, heat capacity of the furnace, and the size of the
charge. – Heat to 2150 to 2200° F for max. toughness and minimum
distortion. – Heat to 2250 to 2275° F for max. hardness and abrasion
hardness, oil quench to 150-200° F. Air quench to 150° F. When quenching
in hot salt maintain the quench just above the Ms temperature. After
equalizing withdraw parts from the hot salt and air cooled to 150° F.
temper is mandatory, three tempers are sometimes preferred. Soak for 2
hours per inch of thickness. Air cool to room temperature between
tempers. The best tempering range for hardness, strength and toughness
is 1000 to 1050° F.
|Temper° F||Rockwell “C”||Temper° F||Rockwell “C”|
6. Machinability of AISI M2 Tool Steel H-SS
of HSS M2 tool steels can be carried out using grinding methods.
However, they have poor grinding capability and hence they are regarded
as “medium” machinability tool steel under annealed conditions. The
machinability of these tool steels M2 is only 50% of that of the easily
machinable W group or water hardening tool steels.
7. M2 Tool Steel Applications
The main use of high-speed steels continues to be in the manufacture of various cutting tools.
applications for M2 high speed steel are twist drills, reamers,
broaching tools, taps, milling tools, metal saws. M2 is suitable for
cold forming tools such as extrusion rams and dies, also widely used in
all kinds of cutting tools, knife and punches and die applications,
plastic moulds with elevated wear resistance and screws.
The Thompson Creek molybdenum mine, owned and operated by the Thompson Creek Mining Company (TCMC), is 20 miles southwest of Challis, Idaho. The mine is the fourth largest primary molybdenum mine in the world, producing approximately 5 percent (up to 15 percent in the past) of the world molybdenum supply. TCMC is the largest employer in Custer County, with approximately 375 employees. Typically, the mine accounts for one out of every five jobs in Custer County, 45 percent of wages and salaries in Custer County, and $114 million of Idaho’s total personal income. Most of the molybdenum produced from the mine is used as an alloy to make high-strength and corrosion-resistant steel.
The mine has been in operation since 1981 and is permitted for approximately 3,400 acres of surface disturbance, of which approximately 2,300 acres are on private land and approximately 1,100 acres are on BLM administered and National Forest System lands
Check out how to watch the special concert on your computer or mobile device.
Concert Zone Site Will air an The Decemberists Special Show Perfomance at Brooklyn Steel, Brooklyn, NY, USA
You must be logged in to continue streaming.
? Live On : http://studio.youtube-concert.com/live/The-Decemberists-at-Brooklyn-Steel,-Brooklyn,-NY,-USA/l3i9ilHpPko (Live stream will be available after Login)
The Decemberists Brooklyn Steel, Brooklyn, NY, USA 19 April 2017
The Decemberists Concert review and setlist
watch The Decemberists in Brooklyn Steel, Brooklyn, NY, USA Live stream airs Tonight Online
The Decemberists Concert in Brooklyn Steel, Brooklyn, NY, USA 19 April 2017
Missed The Decemberists Concert?? , is now available to stream full.
Exclusive The Decemberists LIVE 2017 – Show – Live at Brooklyn Steel, Brooklyn, NY, USA .
The Decemberists LIVE 2017 Brooklyn Steel, Brooklyn, NY, USA – 19 April 2017 at Brooklyn Steel, Brooklyn, NY, USA
Global Superstar The Decemberists Will visit Brooklyn Steel, Brooklyn, NY, USA For the Tour Concert in 19 April 2017
Watch The Decemberists Live 2017 streaming at Brooklyn Steel, Brooklyn, NY, USA for 19 April 2017
The Decemberists Ticket Now available on ConcertZone , Worlds largest live streaming concert online
Live concertZone can now confirm that The Decemberists will concert at Brooklyn Steel, Brooklyn, NY, USA on 19 April 2017
Get the The Decemberists setlist of the concert at Brooklyn Steel, Brooklyn, NY, USA on 19 April 2017
En Vivo | Ao Vivo | In Direct