Discount Price AISI304| SUS304| EN1.4948 Factory in Czech

Discount Price
 AISI304| SUS304| EN1.4948 Factory in Czech

Short Description:

Chemical Composition of Stainless Steel 304 Table 1. Chemical composition for 304 stainless steel alloys % 304 304L 304H C 0.0 – 0.07 0.0 – 0.03 0.04 – 0.08 Mn 0.0 – 2.0 0.0 – 2.00 0.0 – 2.0 Si 0.0 – 1.00 0.0 – 1.00 0.0 – 1.0 P 0.0 – 0.05 0.0 – 0.05 0.0 – 0.04 S 0.0 – 0.03 0.0 – 0.02 0.0 – 0.02 Cr 17.50 – 19.50 17.50 – 19.50 ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    The company upholds the philosophy of "Be No.1 in quality, be rooted on credit and trustworthiness for growth", will continue to serve old and new customers from home and overseas whole-heatedly for Discount Price AISI304| SUS304| EN1.4948 Factory in Czech, Welcome to build the well and long standing business relationships with our company to create a glorious future together .customers' satisfaction is our eternal pursuit


    Chemical Composition of Stainless Steel 304

    Table 1. Chemical composition for 304 stainless steel alloys

    %

    304

    304L

    304H

    C

    0.0 – 0.07

    0.0 – 0.03

    0.04 – 0.08

    Mn

    0.0 – 2.0

    0.0 – 2.00

    0.0 – 2.0

    Si

    0.0 – 1.00

    0.0 – 1.00

    0.0 – 1.0

    P

    0.0 – 0.05

    0.0 – 0.05

    0.0 – 0.04

    S

    0.0 – 0.03

    0.0 – 0.02

    0.0 – 0.02

    Cr

    17.50 – 19.50

    17.50 – 19.50

    17.00 – 19.00

    Ni

    8.00 – 10.50

    8.00 – 10.50

    8.00 – 11.00

    Fe

    Balance

    Balance

    Balance

    N

    0.0-0.11

    0.0-0.11

    0.0 – 0.10

    Properties of Stainless Steel 304

    Mechanical Properties of Stainless Steel 304

    Table 2a. Mechanical properties for 304 stainless steel alloys – sheet up to 8 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    540 – 750

    520 – 700

    -

    Proof Stress (MPa)

    230 Min

    220 Min

    -

    Elongation A50 mm

    45 Min %

    45 Min %

    -


    Table 2b. Mechanical properties for 304 stainless steel alloys – plate from 8 – 75 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    520 – 720

    500 – 700

    -

    Proof Stress (MPa)

    210 Min

    200 Min

    -

    Elongation A5

    45 Min %

    45 Min %

    -


    Table 2c. Mechanical properties for 304 stainless steel alloys – bar and section up to 160 mm diameter / thickness

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    500 – 700

    500 – 700

    500 – 700

    Proof Stress (MPa)

    190

    175 Min

    185 Min

    Elongation A50 mm

    45 Min %

    45 Min %

    40 Min %

    Hardness Brinell

    215 Max HB

    215 Max HB

    -

    Physical Properties of Stainless Steel 304

    Table 3. Physical properties for 304 stainless steel alloys

    Property

    Value

    Density

    8.00 g/cm3

    Melting Point

    1450 °C

    Modulus of Elasticity

    193 GPa

    Electrical Resistivity

    0.072 x 10-6 Ω.m

    Thermal Conductivity

    16.2 W/m.K

    Thermal Expansion

    17.2 x 10-6 /K

    Alloy Designations

    Stainless steel 304 also corresponds to the following standard designations and specifications:

    Euronorm

    UNS

    BS

    En

    Grade

    1.4301

    S30400

    304S15

    304S16

    304S31

    58E

    304

    1.4306

    S30403

    304S11

    -

    304L

    1.4307

    -

    304S11

    -

    304L

    1.4311

    -

    304S11

    -

    304L

    1.4948

    S30409

    304S51

    -

    304H

    Corrosion Resistance of Stainless Steel 304

    Stainless steel 304
    has excellent corrosion resistance in a wide variety of environments
    and when in contact with different corrosive media. Pitting and crevice
    corrosion can occur in environments containing chlorides. Stress
    corrosion cracking can occur at temperatures over 60°C.

    Heat Resistance of Stainless Steel 304

    Stainless steel 304 has
    good resistance to oxidation in intermittent service up to 870°C and in
    continuous service to 925°C. However, continuous use at 425-860°C is
    not recommended if corrosion resistance in water is required. In this
    instance 304L is recommended due to its resistance to carbide
    precipitation.

    Where high strength is required at temperatures above 500°C and up to
    800°C, grade 304H is recommended. This material will retain aqueous
    corrosion resistance.

    Fabrication of Stainless Steel 304

    Fabrication of all stainless steels should
    be done only with tools dedicated to stainless steel materials. Tooling
    and work surfaces must be thoroughly cleaned before use. These
    precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.

    Cold Working of Stainless Steel 304

    Stainless steel 304 readily
    work hardens. Fabrication methods involving cold working may require an
    intermediate annealing stage to alleviate work hardening and avoid
    tearing or cracking. At the completion of fabrication a full annealing
    operation should be employed to reduce internal stresses and optimise
    corrosion resistance.

    Hot Working of Stainless Steel 304

    Fabrication methods, like forging, that involve hot working should
    occur after uniform heating to 1149-1260°C. The fabricated components
    should then be rapidly cooled to ensure maximum corrosion resistance.

    Heat Treatment of Stainless Steel 304

    Stainless steel 304 cannot be hardened by heat treatment.

    Solution treatment or annealing can be done by rapid cooling after heating to 1010-1120°C.

    Machinability

    Stainless steel 304 has good machinability. Machining can be enhanced by using the following rules:

    • Cutting edges must be kept sharp. Dull edges cause excess work hardening.

    • Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.

    • Chip breakers should be employed to assist in ensuring swarf remains clear of the work

    • Low thermal conductivity of austenitic alloys results in heat
      concentrating at the cutting edges. This means coolants and lubricants
      are necessary and must be used in large quantities.

    Welding of Stainless Steel 304

    Fusion welding performance for Stainless steel 304 is excellent both with and without fillers. Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel.
    For 304L the recommended filler is 308L. Heavy welded sections may
    require post-weld annealing. This step is not required for 304L. Grade
    321 may be used if post-weld heat treatment is not possible.

    Applications of Stainless Steel 304

    Stainless steel 304 is typically used in:

    • Sinks and splashbacks

    • Saucepans

    • Cutlery and flatware

    • Architectural panelling

    • Sanitaryware and troughs

    • Tubing

    • Brewery, dairy, food and pharmaceutical production equipment

    • Springs, nuts, bolts and screws

  • Previous:
  • Next:



  • In this video, we take a look at the performance and comfort of both carbon and steel bikes.

    Staff rider Wiggy puts the Scott Solace Carbon Road Bike and Genesis Volare Steel Road Bike through their paces.



    Costa Del Sol Property Group is proud to present for sale property CDSPG0007441.
    This Bar located in Fuengirola, Costa Del Sol for the amazing price of only 53000 €.

    To view this property on our website or to request any further information please visit:

    https://costadelsolpropertygroup.com/7441/Bar-in-Fuengirola,-Costa-Del-Sol

    or call us FREE from the UK on 0800 8620 138 or +34 952 493 709 from anywhere else.

    LEASEHOLD – Life Lease, ( no renewal payments)
    Rent, 1253.60 a Month plus rent retention a quarter.
    Bar, 50 square meters.
    Terrace, 25 square meters.
    Terrace tax, 1500.00 + a year.
    Seating Terrace 40
    Seating in bar 20
    Fully fitted kitchen and bar,
    plus weather proof outside canopy.

    After nearly eighteen years the present owners now in their mid sixties wish to retire here in Fuengirola.
    The present owners have built a solid business over the years and have many regular customers coming
    back year after year.
    The present cook has been employed for over 10 years and is willing to work for any new owners.
    The business is easily run by a couple and the cook during the off peak season.
    During the summer season a kitchen assistant and a part time waiting on person is required owing to the increase in trade.

    Present opening hours
    Winter season November to April 7 days 10am to 4pm
    Summer season April to October 6 days 10am to 4pm & 7pm to 11pm. (closed Tuesdays)
    ANY NEW OWNERS CAN INCREASE THEIR PROFIT MARGINS
    BY OPENING 7 DAYS DURING THE SUMMER AND OPEN LONGER
    HOURS ALL YEAR ROUND.
    As we are that bit older we tend to restrict our opening hours, although during our first
    10 years we did open longer hours and 7 days during the summer, but as we got older
    we preferred a bit more relaxing life style, but still making a good profit.

    Make money from day one.
    The present owner is willing to stay on for a limited period to assist any new owners have a faultless transition.
    The present menu covers, breakfasts, snacks, lunch meals & main meals, a very manageable menu giving
    a good profit margin.
    By keeping the present menu & cook new owners will make money from day one, and in time they can put
    their own stamp on it and change the menu etc, to their own taste.

    Bar, Fuengirola, Costa del Sol.
    Built 50 m², Terrace 25 m².

    Setting : Beachfront, Town, Beachside, Close To Port, Close To Shops, Close To Sea, Close To Town, Close To Schools, Close To Marina.
    Orientation : South.
    Condition : Excellent.
    Views : Sea, Beach, Street.
    Features : Covered Terrace, Near Transport, Bar.
    Furniture : Fully Furnished.
    Kitchen : Fully Fitted.
    Parking : Street.
    Utilities : Electricity, Drinkable Water, Gas.
    Category : Bargain, Cheap, Distressed, Investment, Reduced, Resale.

    Call 0800 862 0138 to enquire about this property Quoting CDSPG0007441

    This property has the following features:

    Bar
    Fuengirola
    Costa Del Sol
    53000 €

    Fully Fitted Kitchen, Street Parking, Build Size: 50 m²

    You may also receive the FREE 25 page buyers guide to spanish property by requesting it on our website at:

    https://costadelsolpropertygroup.com/buyers-guide-request.php

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck