Big Discount AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Factory from Dubai
AISI 4340 steel is a medium carbon, low alloy steel known for its toughness andstrength in relatively large sections. AISI 4340 is also one kind ofnickel chromium molybdenum steels. 4340 alloy steel is generallysupplied hardened and tempered in the tensile range of 930 – 1080 Mpa.Pre hardened and tempered 4340 steels can be further surface hardened by flame or induction hardening and by nitriding. The 4340 steel has goodshock and impact resistance as well as wear and abrasion resistanc...
The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme for Big Discount AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Factory from Dubai, We encourage you to make contact as we are looking for partners in our venture. We are sure you will find doing business with us not only fruitful but also profitable. We are ready to serve you with what you require.
is a medium carbon, low alloy steel known for its toughness and
strength in relatively large sections. AISI 4340 is also one kind of
nickel chromium molybdenum steels. 4340 alloy steel is generally
supplied hardened and tempered in the tensile range of 930 – 1080 Mpa.
Pre hardened and tempered 4340 steels can be further surface hardened by
flame or induction hardening and by nitriding. The 4340 steel has good
shock and impact resistance as well as wear and abrasion resistance in
the hardened condition. AISI 4340 steel properties offer good ductility
in the annealed condition, allowing it to be bent or formed. Fusion and
resistance welding is also possible with our 4340 alloy steel. ASTM 4340
material is often utilized where other alloy steels do not have the
hardenability to give the strength required. For highly stressed parts
it is excellent choice. AISI 4340 alloy steel can also be machined by
all customary methods.
Due to availability the ASTM 4340 grade steel is often substituted
with European based standards 817M40/EN24 and 1.6511/36CrNiMo4 or Japan
based SNCM439 steel. You have the detailed data of 4340 steel below.
1. AISI 4340 Steel Specification and Relevant Standards
|Standard||EN 10250||JIS G4103|
2. ASTM 4340 Steels And Equilvalents Chemical Composition
|JIS G4103||SNCM 439/SNCM8||0.36-0.43||0.60-0.90||0.030||0.030||0.15-0.35||1.60-2.00||0.60-1.00||0.15-0.30|
3. AISI Alloy 4140 Steel Mechanical Properties
(Heat Treated Condition )
|Tensile Strength MPa||Yield Strength
|Thermal expansion co-efficient (20°C/68°F, specimen oil hardened, 600°C (1110°F) temper||12.3 µm/m°C||6.83 µin/in°F|
|Thermal conductivity (typical steel)||44.5 W/mK||309 BTU in/hr.ft².°F|
4. Forging of 4340 Alloy Steel
the steel 4340 first, heat up to 1150°C – 1200°C maximum for forging,
hold until temperature is uniform throughout the section.
Do not forge
below 850 °C. 4340 has good forging characteristics but care must be
taken when cooling as the steel shows susceptibility to cracking.
Following forging operation the work piece should be cooled as slowly as
possible. And cooling in in sand or dry lime is recommended etc.
5. AISI 4340 Steel Grade Heat Treatment
pre-hardened steel stress relieving is achieved by heating steel 4340
to between 500 to 550°C. Heat to 600 °C – 650 °C, hold until temperature
is uniform throughout the section, soak for 1 hour per 25 mm section,
and cool in still air.
full anneal may be done at 844°C (1550 F) followed by controlled
(furnace) cooling at a rate not faster than 10°C (50 F) per hour down to
315°C (600 F). From 315°C 600 F it may be air cooled.
4340 alloy steel should be in the heat treated or normalized and heat
treated condition before tempering. The tempering temperature for
depends upon the strength level desired. For strength levels in the 260 –
280 ksi range temper at 232°C (450 F). For strength in the 125 – 200
ksi range temper at 510°C (950 F). And don’t temper the 4340 steels if
it is in the 220 – 260 ksi strength range as tempering can result in
degradation of impact resistance for this level of strength.
Tempering should be avoided if possible within the range 250 °C – 450 °C due to temper brittleness.
Flame or Induction Hardening
As mentioned above, pre-hardened and tempered 4340 steel bars or plates can be further surface hardened by either the flame or induction hardening
methods resulting in a case hardness in excess of Rc 50. AISI 4340
steel parts should be heated as quickly as possible to the austenitic
temperature range (830 °C – 860 °C) and required case depth followed by
an immediate oil or water quenching, depending upon hardness required,
workpiece size/shape and quenching arrangements.
quenching to hand warm, tempering at 150°C – 200°C will reduce stresses
in the case with minimal effect on its hardness.
All de-carburised surface material must first be removed to ensure best results.
and tempered 4340 alloy steel can also be nitrided, giving a surface
hardness of up to Rc 60. Heat to 500°C – 530°C and hold for sufficient
time (from 10 to 60 hours) to develop the depth of case. Nitriding
should be followed by slow cooling (no quench) reducing the problem of
distortion. The nitrided grade 4340 materials can therefore be machined
to near final size, leaving a small grinding allowance only. The tensile
strength of the 4340 steel material core is usually not affected since
the nitriding temperature range is generally below the original
tempering temperature employed.
Surface hardness achievable is 600 to 650HV.
is best done with the alloy steel 4340 in the annealed or normalized
and tempered condition. It can be readily machined by all conventional
methods such as sawing, turning, drilling etc. However in the high
strength conditions of 200 ksi or greater the machinability is only from
25% to 10% that of the alloy in the annealed condition.
of steel 4340 in the hardened and tempered condition (as normally
supplied), is not recommended and should be avoided if at all possible,
because of the danger of quench cracking, as the mechanical properties
will be altered within the weld heat affected zone.
must be carried out, pre-heat to 200 to 300°C and maintain this while
welding. Immediately after welding stress relieve at 550 to 650°C, prior
to hardening and tempering.
If welding in the hardened and
tempered condition is really necessary, then the work piece, immediately
on cooling to hand warm, should be if possible stress relieved at 15 °C
below the original tempering temperature.
8. Application of 4340 Steel
4340 steel is used in most industry sectors for applications requiring
higher tensile/yield strength than 4140 steel can provide.
Some typical applications such as:
Aircraft Landing Gear
Oil and Gas Drilling,
Warm and Cold Forming,
Transfer Systems, like power transmission gears and shafts.
engineering industries and structural use applications, such as: heavy
duty shafts, gears, axles, spindles, couplings, pins, chucks, molds etc.
TCM BALER：http://www.tcmbaler.com/ a professional manufacturer, specialize in hydraulic compressing machine/ baling press compactor/pressing baler for more than 15years, Our products are applicable for waste cardboard/ cardbox, OCC, plastic bottles ,fiber, rags,wipers,used clothes/clothing,textiles, cotton, newspaper, kraft paper, scrap metal, mattress spring, scrap car body, heavy steel etc. plays a big role in recycling industry, welcomed by domestic and national customers.
1.Fully automatic horizontal baling press
2.Semi-automatic horizontal baling press
3.vertical baling press baler
4.wipers/rags bagging press baler
5.scrap metal baling compactor
6.shearing baler machine
8.movable scrap metal baler compactor
9.single shaft shredder
10.double shaft shredder
Tel: 0086 -21-61522014
Scrap Metal Copper Baler Aluminum Recycling Machinery Armenia, Aluminum Profiles Baler Ce, Scrap Metal Copper Baler Aluminum Recycling Machinery aluminum Medicine Plate Recycling Machine, steel, copper, aluminum, stainless steel, discarded, Horizontal Aluminum Profile Baler, Scrap Metal Balers Australian Recycling Equipment Argentina, Used Scrap Metal Balers, Australian Recycling Equipment offers a relatively large pieces of scrap metal, including copper, aluminum, can balers lock aluminium or steel, Aluminum Can Hydraulic Baler, Scrap Iron Copper Aluminum Baler, Scrap Iron Copper Australia, Metal Baling Machine, Scrap Iron Copper Aluminum Baler, Y83 2500 baler scrap metal baler iron copper aluminum steel recycling equipment CE. Jiangsu Wanshida Hydraulic Machinery, Scrap Metal Hydraulic Press Machine, Scrap Metal Balers, Ferrous Balers, Bronneberg Recycling Switzerland, Scrap Aluminum Can Baler, scrap metal balers compress the metal into blocks for further recycling. aluminum and steel turnings, copper and aluminum scrap, and even aluminum cans., Car Baler, Scrap Metal Balers Products Directory, Equipment Suppliers Cuba, Light Scrap Metal Baler, Scrap Metal Balers Products Aluminum extrusion 6063 scrap, Aluminum tense scrap, copper wire scrap, copper to compress metal scrap steel, Scrap Steel Baler, Scrap Metal Baler, WANSHIDA Hydraulic Baler Egypt, Automatic Metal Balers Equipment, Metal leftover materials can be of aluminum, steel, copper and stainless steel. Our scrap metal baler is for recycling, steel and Scrap Metal Baler, Scrap, scrap iron baler machine, Hydraulic Metal Baler, Scrap Baling Press, Aluminum Can Baler Britain, Scrap Iron Baler Machine, Hydraulic Metal Baler Introduction such as scrap steel, aluminum, and copper turnings, scrap oil tank, scrap steel window, scrap bicycle, , High Quality Mobile Scrap Metal Baler, Metal Balers Scrap Monster UK, Hydraulic Car Metal Baler, Metal Balers Products Directory, Equipment Suppliers, Metal Balers Sellers Directory. waste steel, waste copper aluminum, Scrap Metal Baler With Hopper: 1, Mobile Scrap Iron Metal Baler, Aluminum Baling Machine Iron Scrap Compactor Georgia, Metal Iron Wire Baler, China TF Y81f 2500 Hydraulic Aluminum Baler Scrap Metal Copper aluminum, steel, copper, scrap car, metal of Aluminum Baling Machine Iron Scrap Compactor, Hydraulic Iron Metal Baler, Scrap Metal Recycling Program, Ohio Baler Greece, industrial iron press, OBC has maintained many long term relationships with scrap metal processors, Non Ferrous Scrap, Ferrous Scrap, Steel Cans, Aluminum Cans UBC Ohio Baler, rosin press vendor, hydraulic aluminum scrap metal balers for sale scrap car Hungary, 200 tons steel baler, hydraulic aluminum scrap metal balers for sale scrap car baler for sale, US $ steel shavings, scrap steel, scrap aluminum, scrap copper, scrap stainless steel, Hydraulic Steel Baler Manufacture, Metal Recycling Machinery Equipment Korea, Recycling Equipment, We have scrap metal shears and metal balers still operating equipment for the scrap metal and recycling copper cylinders, aluminium and steel, Automatic Scrap Metal Compressor Scrap, Scrap Metal Balers on Thomas Register Lucia, Scrap Metal Press Baler, Distributor* Used balers are suitable for compacting scrap metal. Balers are fed loose scrap metal steel, aluminum, copper Scrap metal balers include, Stainless Steel Baling Machine, Scrap Metal Recycling Balers, Non Ferrous Metal Recycling Liechtenstein, Scrap Metal Compactor For Sale, Our rugged balers can handle the demands of a scrap metal baler and STEEL CANS, COPPER RADIATORS, LITHO PLATES, ALUMINUM EXTRUSION, ALUMINUM CANS, COPPER, Waste Ferrous
Demonstrating Flexible 12 Square Bars Silicone Mold from Brambleberry. http://www.brambleberry.com/12-Bar-Silicone-Mold-P4908.aspx