8 Years manufacturer C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Supply to South Africa
Steel C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either condition. It does not however respond satisfactorily to nitriding due to a lack of suita...
With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for 8 Years manufacturer C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Supply to South Africa, Welcome to build the well and long standing business relationships with our company to create a glorious future together .customers' satisfaction is our eternal pursuit
an unalloyed medium carbon steel, which is also a general carbon
engineering steel. C45 is a medium strength steel with good
machinability and excellent tensile properties. C45 round steel is
generally supplied in the black hot rolled or occasionally in the
normalised condition, with a typical tensile strength range 570 – 700
Mpa and Brinell hardness range 170 – 210 in either condition. It does
not however respond satisfactorily to nitriding due to a lack of
suitable alloying elements.
C45 round bar steel is equivalent to
Steel C45 bar or plate is suitable for the manufacture of parts such as
gears, bolts, general-purpose axles and shafts, keys and studs.
1. Supply Range of Steel C45 Round Bar
C45 Steel Round Bar: diameter 8mm – 3000mm
C45 Steel Plate: thickness 10mm – 1500mm x width 200mm – 3000mm
C45 Steel Flat Bar: 200mm – 1000mm
Square C45 Steel: 20mm-800mm
Surface Finish: Black, Rough Machined, Turned or as per given requirements.
2. Common C45 Steel Specifications
|Standard||EN 10083-2||AS 1442|
3. C45 Round Bar Steel Chemical Composition Properties
4. Mechanical Properties of C45 Round Bar Steel Material
Mechanical Properties in Quenched+Tempered Condition
|Diameter d (mm)||Thickness t (mm)||0.2 % proof stress (N/mm2)||Tensile strength (N/mm2)||Elongation A5 (%)||Reduction Z (%)|
|<16||<8||min. 490||700-850||min. 14||min. 35|
|<17-40||<8<=20||min. 430||650-800||min. 16||min. 40|
|<41-100||<20<=60||min. 370||630-780||min. 17||min. 45|
Mechanical Properties in Normalized Condition
|Diameter d (mm)||Thickness t (mm)||0.2 % proof stress (N/mm2)||Tensile strength (N/mm2)||Elongation A5(%)|
|<16||<16||min. 390||min. 620||min. 14|
|<17-100||<16<=100||min. 305||min. 305||min. 16|
|<101-250||<100<250||min. 275||min. 560||min. 16|
5. Forging of Carbon Steel C45 Round Bar
Hot forming temperature: 850-1200oC.
heat to 750 oC – 800 oC, then continue heating to 1100 oC – 1200 oC
maximum, hold until temperature is uniform throughout the section and
commence forging immediately. Forging is not workable below 850 oC.
Finished forgings could be air cooled.
We are strong on forged steel C45 round bar. Welcome enquiry of C45 steel materials.
6. DIN C45 Round Bar Steel Grade Heat Treatment
|Forging or hot rolling:||1100 – 850°C|
|Normalising:||840 – 880°C/air|
|Soft annealing:||680 – 710°C/furnace|
|Hardening:||820 – 860°C/water, oil|
|Tempering:||550 – 660°C/air|
7. Hardening of DIN C45 Steel Hardening
Harden from a temperature of 820-860oC followed by water or oil quenching.
to 820 oC – 850 oC hold until temperature is uniform throughout the
section, soak for 10 – 15 minutes per 25mm of section, and quench in
water or brine. Or,
Heat to 830 oC – 860 oC soak as above and quench in oil.Temper immediately while still hand warm.
Surface hardness for C45 special steel round bar after flame or induction hardning:
Steel Name Steel number Surface Harndess
C45 1.1191 min. 55 HRC
8. Application of DIN Carbon Steel C45 Round Bar
C45 round bar steel material and steel plate C45, flats are widely used
in all industry for uses which require more strength and wear
resistance than the low carbon mild steel.
subsequently tempered steel for C45 steel grade round bar, steel plate,
flat and square is used for axles, bolts, forged connecting rods,
crankshafts, torsion bars, light gears, guide rods, screws, forgings,
wheel tyres, shafts, sickles, axes, knives, wood working drills,
Welcome customers to inquiry DIN C45 round bar,
CK45/1.1191 steel plate, flat steel for C45 steel price. We are
professional supplier and exporter for more than 20 years. We offer you
worldwide solution for C45 round bar steel.
Hey guys i took a quick video of the motor starting up just to prove it works before i started to part out my car.
This was my fully built motor in my 99 Eclipse.
Cryo-treated Eagle 4340 Steel crankshaft
Eagle forged connecting rods H beam
Wiseco 8:3:1 85.5mm (20 thou overbore) forged pitons
ARP head studs, main studs, rod bolts
ACL Tri-Metal Race series Main Bearings
ACL Tri-Metal Race series Rod Bearings
Buschur Racing Harmonic under drive pulley
New Topline water pump
New OEM oil pump
AEM true time cam gears
Greddy Timing Belt
Head resurfaced, head cleaned valves re seated, ported, polished and Pressure tested
HKS 272/272 Cams
Ferrea Titanium Valves 6000 series
Ferrera Valve locks
Viton valve stem seals
Cometic MLS (Multi Layer Steel) head gasket
Topline Complete gasket set
Turbo, exhaust and Intake
Garrett GT30R Dual ball bearing, twin scroll T3/T4 hybrid matched with Tial GT-35r with the cast SS exhaust housing (rated for 600+ HP)
Ceramic coated Stage 3 Stainless steel equal length header with 41 mm flange and Titanium Exhaust Wrap
Tial 41 mm Wastegate with 18 psi springs
VRS 2.5″ Front mount intercooler (Bar and plate 3.5x10x34)
HKS SSQV 2 blow off valve
3 ” ExoticSpeed R1-T complete turbo back exhaust
Forced Performance Intake pipe ( 4 inch inlet)
MAF removed/switched to speed density
Mishimoto Aluminum Race Rad
Flex-a-Lite Rad Fan
Devils own stage 1 Meth kit
Walboro 255 LPH fuel pump
PCI 880 cc injectors
Aeromotive Fuel regulator with 100 PSI Motometer Gauge
Brand new Mitsubishi OEM Transmission (2009 Not a rebuild) Redline Synthetic Oil
Fidanza stage 3.2 Carbon Kevlar 4 puck Performance clutch (511 ft/lbs)
Fidanza Aluminum 8 pnd lightened flywheel
Eprom ECU with DSMLink v3
Greddy Turbo Timer
Autometer Boost Gauge
Autometer Pro-Comp Ultra-Lite Oil temp gauge
Autometer Pro-Comp Ultra-Lite Oil gauges
AEM Wideband 02
Optoma Yellow Top Battery
Tein Super Street adjustable Coilovers with 16 way adjustable Damper
SPC Performance control arms with adjustable ball joints
New OEM wheel bearings and lower control arms
18 inch Enkei Rims with Pirelli Tires
Upgraded to 2G AWD dual piston caliper’s and rotors.
Rear strut/Sway bar
Red Prothane Motor mounts
All coolant and oil lines replaced with SS braided lines
ECU controlled boost controller with per gear boost.
Gates 170* thermostat
NGK copper plugs
Fully Built 7 bolt 4G63-T from a 99 block with split bearings (new bearing design introduced in 98 to prevent crank-walk)
Engine was built by Gord Bush to rev to 10,000rpm+ reliably and can easily handle 1000+ HP