29 Years Factory BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Manufacturer in Romania

29 Years Factory
 BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Manufacturer in Romania

Short Description:

BS EN 42crmo4 Alloy Steel is a common chromium-molybdenum steel that usually used after quenchedand tempered, with high intensity, high hardenability. BS EN 42CrMo4round steel has better performance than 34CrMo4 steel due to the carbonand chromium content is higher. 42CrMo4 alloy steel has higher strength and hardenability. The 42CrMo4 alloy material alsohas high fatigue strength and good low-temperature impact toughness. The temper brittleness is not obvious. Although 42CrMo4 steel is mo...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    The company upholds the philosophy of "Be No.1 in quality, be rooted on credit and trustworthiness for growth", will continue to serve old and new customers from home and overseas whole-heatedly for 29 Years Factory BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Manufacturer in Romania, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.


    BS EN 42crmo4 Alloy Steel

    is a common chromium-molybdenum steel that usually used after quenched
    and tempered, with high intensity, high hardenability. BS EN 42CrMo4
    round steel has better performance than 34CrMo4 steel due to the carbon
    and chromium content is higher. 42CrMo4 alloy steel

    has higher strength and hardenability. The 42CrMo4 alloy material also
    has high fatigue strength and good low-temperature impact toughness. The

    temper brittleness is not obvious.

    Although 42CrMo4 steel is more expensive than 41Cr4 steel, it is more

    preferable in terms of material properties. EN 42CrMo4 alloy
    engineering steel materials have been widely used in automotive driving
    elements. Otai Steel is able to supply you prime quality of 42CrMo4
    alloy steel materials with wide range.

    1.42CrMo4 Alloy Steel Supply Range

    42CrMo4 Round bar Sizes: 80mm – 1200mm
    Steel 42CrMo4 Flat and Plate: 10mm-1500mm thickness x 200-3000mm width
    Other steel shape and sizes available according to your requirements.

    Surface condition: Black, rough machined, peeled, turned or other requirements according to your requirements.

    2.BS EN 42CrMo4 Alloy Steel Relevant Specifications and Equivalents

    BS EN 10250 Material No. DIN ASTM A29 JIS G4105 BS 970-3-1991 BS 970-1955 AS 1444 AFNOR
    42CrMo4 1.7225 38HM 4140 SCM440 708M40 EN19A 4140 42CD4

    3.42CrMo4 Alloy Steel Chemical Composition

    42CrMo4/1.7225 C Mn Si P S Cr Mo
    0.38-0.45 0.60-0.90 0.40 max 0.035 max 0.035 max 0.90-1.20 0.15-0.30

    4. DIN 42CrMo4 Alloy Steel Mechanical Properties

    Size Ø mm Yield stress
    Rp0.2,N/nn2, min.
    Ultimate tensile Stress,
    Rm,N/nn2
    Elongation
    A5,%, min.
    Hardness HB Toughness
    KV, Joule, min.
    <40 750 1000-1200 11 295-355 35 at 20ºC
    40-95 650 900-1100 12 265-325 35 at 20ºC
    >95 550 800-950 13 235-295 35 at 20ºC

    5. Heat Treatment of 42CrMo4 Steels

    Annealing of 42CrMo4 Steels

    • Heat steel 42CrMo4 forged steel slowly and thoroughly to 800-850°C;

    • Cool slowly in the furnace to the temperature 480°;

    • Complete annealing the steel in the air.

    Quenched and Tempered (Q+T)

    • Heat 42CrMo4 steel slowly to 880°C;

    • Soak at this temperature then quench in oil;

    • Temper as soon as 42CrMo4 steel reach room temperature (20°C);

    • Heat uniformly to the suitable temperature of 560°C;

    • Withdraw the 42CrMo4 material from the furnace and cool in the air.

    6. Forging of 42CrMo4 Alloy Steel

    • Preheat 42CrMo4 engineering steel uniformly and slowly;

    • Increase the forging temperature up to 1150-1200°C.

    • Always keep the forging temperature above at least 850°C

    7.Weldability

    Engineering

    steel 42CrMo4 has only limited weldability. Preheating to 200-300°C is
    strongly recommended; the upper limit should not be exceeded because of
    risk for deterioration of the chrome layer.

    Alloy steel 42CrMo4
    can be friction welded. However, precautions are necessary so as to
    limit the formation of undesirable microstructures in the welded zone.

    8.Application of 42CrMo4 Alloy Steels

    EN

    42CrMo4 alloy steel is widely used for engineering steel purpose, such
    as: making various kinds of machinery, automobile, mining spare part,
    the gearwheel of the engine, the driving gear of supercharger, the
    connecting rob, the pinchock under the high pressure, parts for power
    train applications, cold formed fastener components, shafts, gears,
    drill collars for the oil exploration, etc.

  • Previous:
  • Next:




  • : Irwin 15 piece HSS Professional Drill Bit Set
    HSS drill bits are designed to drill into a wide variety of materials such as metals, plastics and wood. All tradesmen will use them, as will most DIY’ers and home owners. HSS (High Speed Steel) drills are also known by many as ‘Jobber’ drills. HSS drills are not all manufactured to the same high standards and quality can vary dramatically. Poor quality drills will lead to very poor performance and a drill bit that will go blunt almost immediately. Irwin have been specialists in drilling for years and are well known for supplying top quality drill bits into industry and manufacturing.
    This professional 15 piece HSS set has been developed for trade use. The drill bits have 135° Split Point tips to reduce slipping, which is a common fault in many other HSS drills. The edges are precision ground so that the cutting angles are consistent and provide fast, clean cuts time and time again. This, along with the flute design along the shank, enables waste material to be removed quickly and efficiently. Again, this will result in a faster, cleaner and more accurate holes. This is critical if you are working to specific sizes and tolerances. They are ideal for metal, wood and plastic.
    The set is supplied in a robust lockable case. Each drill bit is stored in its own hole with an easy to read size guide for quick identification.
    This 15 piece set contains the following sizes:
    1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 8.0, 9.0 and 10mm.

    Contents & Features
    • Precision ground drill bits.
    • 135° Split point tips to reduce ‘wander’.
    • Popular sizes: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 8.0, 9.0 and 10mm.
    • Lockable storage case.
    • Ideal for drilling wood, metal, plastics, chipboard, plywood and similar materials.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup