28 Years Factory EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Supply to Brunei

28 Years Factory
 EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Supply to Brunei

Short Description:

EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for
    28 Years Factory EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Supply to Brunei, we have built a reliable reputation among many customers. Quality&customer first are always our constant pursuit. We spare no efforts to make better products. Look forward to long-term cooperation and mutual benefits!


    EN 34CrNiMo6 Steel
    is an important alloy engineering steel grade as per BS EN
    10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
    hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
    resistance to overheating, but the white sensitivity of 34CrNiM06 is
    high. It also has the temper brittleness, so the weldability of
    34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
    temperature preheating before welding in order to eliminate the stress
    after welding processing.

    1.EN Steel 34CrNiMo6 Supply Range

    Round Steel Bar Sizes: diameter 80mm – 1200mm
    Other steel shape and sizes available according to your requirements.

    Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.

    2.EN 34CrNiMo6 Steel Standards And Equivalents

    BS EN 10083 -3: 2006 34CrNiMo6 / 1.6582 ASTM A29: 2004 4337
    BS EN 10250 – 3: 2000

    3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties

    BS EN 10083 – 3:2006 34CrNiMo6
    /1.6582
    C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.025 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    BS EN 10250-3:2000 C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.035 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    ASTM A29: 2004 4337 C Mn Si P S Cr Mo Ni
    0.30-0.40 0.6-0.8 0.20-0.35 0.035 max 0.040 max 0.70-0.90 0.20-0.30 1.65-2.00

    4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel

    Properties < 16 >16 – 40 >40 – 100 >100 – 160 >160 – 250
    Thickness t [mm] < 8 8<t<20 20<t<60 60<t<100 100<t<160
    Yield strength Re [N/mm²] min. 1000 min. 900 min. 800 min. 700 min. 600
    Tensile strength Rm [N/mm2] 1200 – 1400 1100 – 1300 1000 – 1200 900 – 1100 800 – 950
    Elongation A [%] min. 9 min. 10 min. 11 min. 12 min. 13
    Reduction of area Z [%] min. 40 min. 45 min. 50 min. 55 min. 55
    Toughness CVN [J] min. 35 min. 45 min. 45 min. 45 min. 45

    5.Heat Treatment of 34CrNiMo6 Engineering Steel

    Quenched and Tempered (Q+T) of 34CrNiMo6 Steel

    • Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;

    • Soak at this hardening temperature quench in oil;

    • Temper as soon as 34CrNiMo6 steels reach room temperature.

    • Heat uniformly to the suitable temperature;

    • Withdraw from the furnace and cool in the air.

    • The usual tempering temperature is 600°C which depending on the actual requirements.

    6.Forging of DIN 34CrNiMo6 / 1.6582 Steel

    Hot forming temperature: 1100-900oC.

    7.Machinability of Steel 34CrNiMo6

    Machining
    is best done with this 1.6582 alloy steel in the annealed or normalized
    and tempered condition. It can be machined by all conventional methods.

    8.Welding

    The
    alloy materials can be fusion or resistance welded. Preheat and post
    heat weld procedures should be followed when welding this alloy by
    established methods.

    9.Application

    EN DIN
    34CrNiMo6 steel is used to make tools which demands good plasticity and
    high strength. It is usually selected to make the big size and important
    parts, such as heavy machinery axle,turbine shaft blade, high load of
    transmission parts, fasteners, crank shafts, gears, as well as heavily
    loaded parts for motor construction etc.

    Otai Steel is reliable to
    supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
    Please tell us your detailed requirements and have the best offer soon.

  • Previous:
  • Next:



  • In this video I show you the Shop ePackageSupply at the Storage amp; Organization store. Free Shipping on eligible items. Everyday low. For more details please visit: http://po.st/HfSmjT Thank You!

    Great 8 oz Food Grade 4 x 5 Rectangular Container Review
    8 oz Food Grade 4 x 5 Rectangular Container Test
    8 oz Food Grade 4 x 5 Rectangular Container Unboxing
    Review 8 oz Food Grade 4 x 5 Rectangular Container Hands-on

    https://www.youtube.com/watch?v=vw0CTh-fPEI



    HIGH SECURITY CYLINDERS

    “DESMODROMIC” CONCEPT
    The mechanism of the cylinder is based on a forced pathway concept. In the absence of the key the combination tumblers are in a random position, any movement or vibration of the cylinder can cause displacement of the tumblers in an unforeseen manner.
    The encoding of the key corresponds to the shape of the track obtained on the key. When the key is inserted into the cylinder,
    the tumblers are in the only allowed position that corresponds to the encoding of the key. The so called “bumping” technique (widespread system of illegal opening of the cylinders) is not applied to the NEW POWER and D-UP cylinder, thanks to the tested and certified desmodromic encryption system.

    REVERSIBLE KEY
    “Reversible” key means that the 2 sides of the key are equally operational, therefore the user must not look for a given direction to insert the key in the cylinder.

    NON DESTRUCTIVE SECURITY AGAINST TAMPERING
    The cylinder is fitted with recognition mechanism and block of the fake key. In case an especially modified key is inserted in the cylinder, such key is recognized and captured, i.e. it gets blocked in the cylinder.

    DRILL-PROOF PROTECTION AND KEY PROFILES CONTROL
    The drill-proof protection is guaranteed by 2 elements, being a ball and a pin made out of hardened steel, the half moon shaped plate protects the tumblers and also works as control of the key profile.

    HOUSEBREAK-IN RESISTANCE
    The New Power and D-Up cylinders is equipped with modules linking bar, made of steel alloy, it ensures a high resistance in the event of the cylinder being forced.

    CYLINDER DUPLICATION SYSTEM
    CC – CENTRAL KEY
    KA – EQUAL KEYS
    MK – MASTER KEY
    GMK – GROUP MASTER KEY
    DOUBLE LIFE
    CYLINDER WITH SINGLE SITE KEY
    CYLINDER WITH MULTIPLE SITE KEY

    CONTROLLED DUPLICATION, GUARANTEED SECURITY
    Protected, controlled key profile by Dierre S.p.a.

    CLASSIFICATION EN1303:2005
    Durability 6 (max.6)
    Attack resistance 2 (max.2)
    Security 6 (max.6)
    Corrosion resistance C (max.C)
    Fire resistance 1 (max.1)

    These cylinders are certified by CNPP (French laboratory) and achieved the A2P** level

    ANTIBUMPING CYLINDERS
    ANTIPICKING CYLINDERS

    DIERRE THE ITALIAN STYLE DOOR
    Visit our website: www.dierre.com

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star