14 Years Factory wholesale AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Factory from Spain

14 Years Factory wholesale
 AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Factory from Spain

Short Description:

AISI 8620 Steel is a low alloy nickel, chromium, molybdenum case hardening steel,generally supplied in the as rolled condition with a maximum hardness HB 255max. SAE steel 8620 offers high external strength and good internalstrength, making it highly wear resistant. AISI 8620 steel has a highercore strength than grades 8615 and 8617. SAE 8620 alloy steel isflexible during hardening treatments, thus enabling improvement ofcase/core properties. Pre hardened and tempered (uncarburized) 8620 ca...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for 14 Years Factory wholesale AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Factory from Spain, We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.


    AISI 8620 Steel

    is a low alloy nickel, chromium, molybdenum case hardening steel,
    generally supplied in the as rolled condition with a maximum hardness HB

    255max. SAE steel 8620 offers high external strength and good internal
    strength, making it highly wear resistant. AISI 8620 steel has a higher
    core strength than grades 8615 and 8617.

    SAE 8620 alloy steel is
    flexible during hardening treatments, thus enabling improvement of
    case/core properties. Pre hardened and tempered (uncarburized) 8620 can
    be further surface hardened by nitriding but will not respond
    satisfactorily to flame or induction hardening due to its low carbon
    content.

    Steel 8620 is suited for applications which require a
    combination of toughness and wear resistance. This grade is commonly
    supplied in round bar.

    1. AISI 8620 Steel Supply Range

    8620 Round Bar: diameter 80mm – 1200mm
    8620 Steel Plate: thickness 10mm – 1500mm x width 200mm – 3000mm
    8620 Square Bar: 140mm – 460mm
    8620 tubes are also available against your detailed request.
    Surface Finish: Black, Rough Machined, Turned or as per given requirements.

    2. SAE 8620 Steel Specification and Relevant Standards

    Country

    USA DIN BS BS

    Japan

    Standard

    ASTM A29 DIN 1654 EN 10084

    BS 970

    JIS G4103

    Grades

    8620

    1.6523/
    21NiCrMo2

    1.6523/
    20NiCrMo2-2

    805M20

    SNCM220

    3. ASTM 8620 Steels & Equilvalents Chemical Composition

    Standard Grade C Mn P S Si Ni Cr Mo
    ASTM A29 8620 0.18-0.23 0.7-0.9 0.035 0.040 0.15-0.35 0.4-0.7 0.4-0.6 0.15-0.25
    DIN 1654 1.6523/
    21NiCrMo2
    0.17-0.23 0.65-0.95 0.035 0.035 ≦0.40 0.4-0.7 0.4-0.7 0.15-0.25
    EN 10084 1.6523/
    20NiCrMo2-2
    0.17-0.23 0.65-0.95 0.025 0.035 ≦0.40 0.4-0.7 0.35-0.70 0.15-0.25
    JIS G4103 SNCM220 0.17-0.23 0.6-0.9 0.030 0.030 0.15-0.35 0.4-0.7 0.4-0.65 0.15-0.3
    BS 970 805M20 0.17-0.23 0.6-0.95 0.040 0.050 0.1-0.4 0.35-0.75 0.35-0.65 0.15-0.25

    4. AISI 8620 Steel Mechanical Properties

    • 8620 Physical Properties:

    Density (lb / cu. in.) 0.283
    Specific Gravity 7.8
    Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) 0.1
    Melting Point (Deg F) 2600
    Thermal Conductivity 26
    Mean Coeff Thermal Expansion 6.6
    Modulus of Elasticity Tension 31

    • 8620 Steel Mechanical Properties

    Properties Metric Imperial
    Tensile strength 530 MPa 76900 psi
    Yield strength 385 MPa 55800 psi
    Elastic modulus 190-210 GPa 27557-30458 ksi
    Bulk modulus (typical for steel) 140 GPa 20300 ksi
    Shear modulus (typical for steel) 80 GPa 11600 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30
    Izod Impact 115 J 84.8 ft.lb
    Hardness, Brinell 149 149
    Hardness, Knoop (converted from Brinell hardness) 169 169
    Hardness, Rockwell B (converted from Brinell hardness) 80 80
    Hardness, Vickers (converted from Brinell hardness) 155 155
    Machinability (hot rolled and cold drawn, based on 100 machinability for AISI 1212 steel) 65 65

    5. Forging of Material 8620 Steel

    AISI

    8620 alloy steel is forged at a start temperature of around 2250ºF
    (1230ºC) down to approximately 1700ºF(925ºC.) prior to the hardening
    heat treatment or carburizing. The alloy is air cooled after forging.

    6. ASTM 8620 Steel Heat Treatment

    • Annealing

    AISI

    8620 steel may be given a full anneal by heat to 820℃ – 850℃, and hold
    until temperature is uniform throughout the section and cool in furnace
    or air cooled.

    • Tempering

    Tempering

    of heat treated and water quenched parts of 8620 steels (not
    carburized) is done at 400 F to 1300 F to improve case toughness with
    minimal effect on its hardness. This will also reduce the possibility of

    grinding cracks.

    • Hardening

    The

    AISI steel 8620 will be austenitized at around 840°C – 870°C, and oil
    or water quenched depending upon section size and intricacy. Cool in Air

    or Oil required.

    • Normalizing

    1675ºF

    (910ºC) and air cool. This is another method of improving machinability

    in 8620 material; normalizing might also be used prior to case
    hardening.

    7. Machinability of SAE 8620 Steel

    The

    8620 alloy steel is readily machined after heat treatment and/or
    carburizing, should be at a minimum so as not to impair the hardened
    case of the part. Machining may be done by conventional means prior to
    heat treatment – after carburizing machining is usually limited to
    grinding.

    8. Welding of 8620 Materials

    The
    alloy 8620 may be welded as rolled condition by conventional methods,
    usually gas or arc welding. Preheating at 400 F is beneficial and
    subsequent heating after welding is recommended – consult the approved
    weld procedure for the method used. However, welding in the case
    hardened or through hardened condition is not recommended

    9. Application of ASTM 8620 Steel

    AISI

    8620 steel material is used extensively by all industry sectors for
    light to medium stressed components and shafts requiring high surface
    wear resistance with reasonable core strength and impact properties.

    Typical

    applications are: Arbors, Bearings, Bushings, Cam Shafts, Differential
    Pinions, Guide Pins, King Pins, Pistons Pins, Gears, Splined Shafts,
    Ratchets, Sleeves and other applications where it is helpful to have a
    steel that can be readily machined and carburized to controlled case
    depths.

  • Previous:
  • Next:



  • This home is straight out of Log Home Magazine. The attention to detail is amazing and hard to describe. The rustic charm with the hand-crafted cabinets, counters and the walnut mantle fixed to the stone fireplace needs to be seen to understand the beauty.

    The efficient home is heated and cooled by a zoned Geo-Thermal unit with radiant heat in the garage and workshop. The home is manufactured by using kiln dried logs, which greatly reduces the shrinking associated with other log manufactures. The wrap around porch and deck, with hot tub, offers amazing views of the 1.25 acres pond and rolling woodlands. The lower level has a stained concrete floor and its own wet bar with an amazing counter top crafted from a hardwood log with a lot of character. The basement is a walkout with French Doors leading out to the stocked pond which has an aeration unit and electrical service to the dock.

    There is a guest cabin tucked in the timber overlooking the picturesque stream. The cabin is 16 x 24 with a bathroom, electric service, a wood stove or an electric heat unit. The cabin has 2 x 6 inch walls a 50 year metal roof and built to last! There is also a 40 x 30 Ragland steel building with a poured concrete floor and electric service that is perfect for storing tractor(s), ATV’S and farm implements.

    The acreage is very well maintained and managed for trophy whitetail hunting. There are 12 acres of food plots and an 8 acre sanctuary ensuring the large bucks will be on your property when the times comes to hunt! There are 5 miles of groomed trails making access very easy. There is a creek crossings in place and an elevated Shadow Hunter blind to remain with the property.

    This is a one-of-a-kind property that needs to be seen to be fully appreciated!

    3760 Sq Ft Authentic Log Home
    3 Bedrooms, 4 full baths and 2- ½ baths
    Scraped oak flooring through most of the home
    Cabinets, counters and fireplace are hand-crafted from walnut and spalted maple
    Custom steel railings
    Hot tub on the back deck
    City Water
    30 x 30 attached garage
    Apartment above garage for in-laws or rental income
    40 x 30 attached workshop w/ its own bathroom
    Radiant Geo-Thermal heat through-out house, garage and workshop
    Beautiful 16 x 24 guest cabin on cement pillars deep past frost line
    Stocked Pond 26 feet deep with its aeration unit and 2 docks
    Rot-resistant N White Pine Timbers
    12 tillable acres being used as wildlife food plots
    5+ miles of groomed trails
    Back-up propane generator
    Shooting range
    Elevated tower blind

    LandGuys, LLC
    Illinois Land Broker
    Don Wagner
    Cell: 309-335-2894
    Office: 217-899-1240
    Fax: 309-243-8707
    Email: Don@landguys.net

    LandGuys Land For Sale, Hunting Land, Timberland, Farms and Ranches, Home Sites, Whitetail and Premier Listing
    LandGuys specialize in recreational, hunting and farmland sales.



    On this episode of You Need This Also, I spotlight the oh so great Plane Rivets. They usually look cool and are not as tough to do as you would consider.

    Plane Instrument Supply Overall economy Rivet Gun – http://amzn.to/21k5RSS
    These are a minor greater than your conventional air hammer but are built for rivets and work way better than an air hammer.
    Plane Instrument Supply Rivets Sets (anvils) – http://amzn.to/1oD6DIV
    This is a entire set for all dimensions of rivets.
    two hundred Pcs one/8″ Spherical Head Rivets – http://amzn.to/21k894p
    They make so numerous various sorts and sizes…you will just will need to come across what is effective for you.
    Plane Instrument Supply Bucking Bar – http://amzn.to/21k8Bjh
    This is almost certainly the greatest standalone bucking bar to acquire.

    Fabrication Apparel – https://www.killfab.com

    You can usually come across me below:
    Fb: thefabforums
    Instagram: @thefabforums
    Twitter: @thefabforums
    SnapChat Username: vossperformance
    www.thefabforums.com

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup