Wholesale Distributors for BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Manufacturer in Boston
BS EN 42crmo4 Alloy Steel is a common chromium-molybdenum steel that usually used after quenchedand tempered, with high intensity, high hardenability. BS EN 42CrMo4round steel has better performance than 34CrMo4 steel due to the carbonand chromium content is higher. 42CrMo4 alloy steel has higher strength and hardenability. The 42CrMo4 alloy material alsohas high fatigue strength and good low-temperature impact toughness. The temper brittleness is not obvious. Although 42CrMo4 steel is more ...
We stick to our enterprise spirit of "Quality, Efficiency, Innovation and Integrity". We aim to create more value for our customers with our rich resources, advanced machinery, experienced workers and excellent services for Wholesale Distributors for BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Manufacturer in Boston, We, with great passion and faithfulness, are willing to provide you with perfect services and striding forward with you to create a bright future.
BS EN 42crmo4 Alloy Steel
is a common chromium-molybdenum steel that usually used after quenched
and tempered, with high intensity, high hardenability. BS EN 42CrMo4
round steel has better performance than 34CrMo4 steel due to the carbon
and chromium content is higher. 42CrMo4 alloy steel
has higher strength and hardenability. The 42CrMo4 alloy material also
has high fatigue strength and good low-temperature impact toughness. The
temper brittleness is not obvious.
Although 42CrMo4 steel is more expensive than 41Cr4 steel, it is more
preferable in terms of material properties. EN 42CrMo4 alloy
engineering steel materials have been widely used in automotive driving
elements. Otai Steel is able to supply you prime quality of 42CrMo4
alloy steel materials with wide range.
1.42CrMo4 Alloy Steel Supply Range
42CrMo4 Round bar Sizes: 80mm – 1200mm
Steel 42CrMo4 Flat and Plate: 10mm-1500mm thickness x 200-3000mm width
Other steel shape and sizes available according to your requirements.
Surface condition: Black, rough machined, peeled, turned or other requirements according to your requirements.
2.BS EN 42CrMo4 Alloy Steel Relevant Specifications and Equivalents
|BS EN 10250||Material No.||DIN||ASTM A29||JIS G4105||BS 970-3-1991||BS 970-1955||AS 1444||AFNOR|
3.42CrMo4 Alloy Steel Chemical Composition
|0.38-0.45||0.60-0.90||0.40 max||0.035 max||0.035 max||0.90-1.20||0.15-0.30|
4. DIN 42CrMo4 Alloy Steel Mechanical Properties
|Size mm||Yield stress
|Ultimate tensile Stress,
KV, Joule, min.
|<40||750||1000-1200||11||295-355||35 at 20oC|
|40-95||650||900-1100||12||265-325||35 at 20oC|
|>95||550||800-950||13||235-295||35 at 20oC|
5. Heat Treatment of 42CrMo4 Steels
Annealing of 42CrMo4 Steels
- Next: 50% OFF Price For Metal Forms in Rio de Janeiro
Heat steel42CrMo4 forged steel slowly and thoroughly to 800-850°C;
Cool slowly in the furnace to the temperature 480°;
Complete annealing the steel in the air.
Quenched and Tempered (Q+T)
Heat 42CrMo4 steel slowly to 880°C;
Soak at this temperature then quench in oil;
Temper as soon as 42CrMo4 steel reach room temperature (20°C);
Heat uniformly to the suitable temperature of 560°C;
Withdraw the 42CrMo4 material from the furnace and cool in the air.
6. Forging of 42CrMo4 Alloy Steel
Preheat 42CrMo4 engineering steel uniformly and slowly;
Increase the forging temperature up to 1150-1200°C.
Always keep the forging temperature above at least 850°C
steel 42CrMo4 has only limited weldability. Preheating to 200-300°C is
strongly recommended; the upper limit should not be exceeded because of
risk for deterioration of the chrome layer.
Alloy steel 42CrMo4
can be friction welded. However, precautions are necessary so as to
limit the formation of undesirable microstructures in the welded zone.
8.Application of 42CrMo4 Alloy Steels
42CrMo4 alloy steel is widely used for engineering steel purpose, such
as: making various kinds of machinery, automobile, mining spare part,
the gearwheel of the engine, the driving gear of supercharger, the
connecting rob, the pinchock under the high pressure, parts for power
train applications, cold formed fastener components, shafts, gears,
drill collars for the oil exploration, etc.
For more information on this vehicle visit http://tinyurl.com/d3um9lh
As Hennessey’s very first 1,000 horsepower Camaro, this car wraps a completely massaged LSX V8, a beefed up 6-speed drivetrain and a thoroughly modified suspension in a platform that’s stylish, luxurious, road-ready and basically brand new!
The car’s rich Cyber Gray paint presents an extra polished appearance thanks to a pair of striking blue hockey stripes. Naturally its slick, showroom fresh fit is as close to perfect as a factory car can get. There isn’t a speck of road rash anywhere on its nose, rockers or broad gray flanks. And honestly, with so few miles on the clock, this pristine Chevy just hasn’t had the opportunity to find any significant trouble on the street or in the ditch.
Cranking out a smooth 855 rear wheel horsepower in pump gas guise and a killer 1,021 max rear wheel horsepower, this Camaro’s lightweight, high performance LSX V8 is about as close as you can get to being duct taped to the fin of a rocket! Derived from GM’s very successful LS engine, the hot 7.0 liter (427 cubic inch) cast iron thoroughbred benefits from a Callies 4340 forged steel crank, forged steel connecting rods, forged aluminum pistons, a custom HPE camshaft, ARP hardware and a completely balanced and blueprinted rotating assembly. A perfect amount of air and fuel is supplied by a 90mm throttle body, upgraded injectors and two K&N air filters that funnel wind through two twin ball bearing turbochargers. That air and fuel mixes in a high performance F.A.S.T. intake manifold and progresses to ported LS3 cylinder heads that are fitted with aftermarket valves. And immediately following combustion, spent gases roar into a three inch Hennessey stainless exhaust system.
Side step the car’s third pedal and a SPEC P-Trim twin disc clutch engages a slick-shifting Tremec 6060 6-speed manual transmission. That transmission is hooked to a factory limited slip rear end, sporty 3.45 gears and stage five half shafts that are rated up to 1,000 horsepower. Built around that driveline is a Nurburgring tested independent performance suspension that’s been augmented with a heavy duty sway bar kit and Pedders coil over shocks. Variable ratio, speed sensitive power steering, big Brembo calipers and 2-piece drilled rotors combine with factory ABS and electronic brake distribution to ensure this is the best handling Camaro to date. And the car’s “Brembo” branded calipers are fronted by 20 inch Hennessey wheels that spin 275/35 front and 305/35 rear Nitto NT555 tires around bright blue spokes.
Inside this pristine Camaro you’ll find a factory fresh cockpit that displays virtually no wear at all. The car’s “Hennessey” branded leather seats are supple, supportive and near perfect in every way. The dash, which features the same dark gray accents as the car’s scuff-free door panels, hangs traditional, silver-trimmed Camaro gauges between a serialized Hennessey plaque and a standard a driver information center. In front of the driver, an Alcantara steering wheel spins buttons for the car’s Bluetooth connectivity, Boston Acoustics audio system and cruise control around a standard tilt and telescoping steering column. And naturally, all the luxuries you’d expect in a high dollar muscle car are present and accounted for including: power windows, power door locks, power mirrors, a power driver’s seat, remote keyless entry and a standard theft deterrent system.
Looking back on the long history of Chevrolet, there’s little doubt this 2010 HPE1000 is one of the fastest, best-handling and most exclusive Camaros of all time. Call, click or visit http://RKMotorsCharlotte.com for more information!
Get it Below: http://www.wicked-steel.com/merchandise-p/wsr006.htm