Wholesale Distributors for AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 in Portland

Wholesale Distributors for
 AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 in Portland

Short Description:

AISI 8620 Steel is a low alloy nickel, chromium, molybdenum case hardening steel,generally supplied in the as rolled condition with a maximum hardness HB 255max. SAE steel 8620 offers high external strength and good internalstrength, making it highly wear resistant. AISI 8620 steel has a highercore strength than grades 8615 and 8617. SAE 8620 alloy steel isflexible during hardening treatments, thus enabling improvement ofcase/core properties. Pre hardened and tempered (uncarburized) 8620 ca...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Innovation, quality and reliability are the core values of our company. These principles today more than ever form the basis of our success as an internationally active mid-size company for Wholesale Distributors for AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 in Portland, Contact with us today! We are ready for the market service now!


    AISI 8620 Steel

    is a low alloy nickel, chromium, molybdenum case hardening steel,
    generally supplied in the as rolled condition with a maximum hardness HB

    255max. SAE steel 8620 offers high external strength and good internal
    strength, making it highly wear resistant. AISI 8620 steel has a higher
    core strength than grades 8615 and 8617.

    SAE 8620 alloy steel is
    flexible during hardening treatments, thus enabling improvement of
    case/core properties. Pre hardened and tempered (uncarburized) 8620 can
    be further surface hardened by nitriding but will not respond
    satisfactorily to flame or induction hardening due to its low carbon
    content.

    Steel 8620 is suited for applications which require a
    combination of toughness and wear resistance. This grade is commonly
    supplied in round bar.

    1. AISI 8620 Steel Supply Range

    8620 Round Bar: diameter 80mm – 1200mm
    8620 Steel Plate: thickness 10mm – 1500mm x width 200mm – 3000mm
    8620 Square Bar: 140mm – 460mm
    8620 tubes are also available against your detailed request.
    Surface Finish: Black, Rough Machined, Turned or as per given requirements.

    2. SAE 8620 Steel Specification and Relevant Standards

    Country

    USA DIN BS BS

    Japan

    Standard

    ASTM A29 DIN 1654 EN 10084

    BS 970

    JIS G4103

    Grades

    8620

    1.6523/
    21NiCrMo2

    1.6523/
    20NiCrMo2-2

    805M20

    SNCM220

    3. ASTM 8620 Steels & Equilvalents Chemical Composition

    Standard Grade C Mn P S Si Ni Cr Mo
    ASTM A29 8620 0.18-0.23 0.7-0.9 0.035 0.040 0.15-0.35 0.4-0.7 0.4-0.6 0.15-0.25
    DIN 1654 1.6523/
    21NiCrMo2
    0.17-0.23 0.65-0.95 0.035 0.035 ≦0.40 0.4-0.7 0.4-0.7 0.15-0.25
    EN 10084 1.6523/
    20NiCrMo2-2
    0.17-0.23 0.65-0.95 0.025 0.035 ≦0.40 0.4-0.7 0.35-0.70 0.15-0.25
    JIS G4103 SNCM220 0.17-0.23 0.6-0.9 0.030 0.030 0.15-0.35 0.4-0.7 0.4-0.65 0.15-0.3
    BS 970 805M20 0.17-0.23 0.6-0.95 0.040 0.050 0.1-0.4 0.35-0.75 0.35-0.65 0.15-0.25

    4. AISI 8620 Steel Mechanical Properties

    • 8620 Physical Properties:

    Density (lb / cu. in.) 0.283
    Specific Gravity 7.8
    Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) 0.1
    Melting Point (Deg F) 2600
    Thermal Conductivity 26
    Mean Coeff Thermal Expansion 6.6
    Modulus of Elasticity Tension 31

    • 8620 Steel Mechanical Properties

    Properties Metric Imperial
    Tensile strength 530 MPa 76900 psi
    Yield strength 385 MPa 55800 psi
    Elastic modulus 190-210 GPa 27557-30458 ksi
    Bulk modulus (typical for steel) 140 GPa 20300 ksi
    Shear modulus (typical for steel) 80 GPa 11600 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30
    Izod Impact 115 J 84.8 ft.lb
    Hardness, Brinell 149 149
    Hardness, Knoop (converted from Brinell hardness) 169 169
    Hardness, Rockwell B (converted from Brinell hardness) 80 80
    Hardness, Vickers (converted from Brinell hardness) 155 155
    Machinability (hot rolled and cold drawn, based on 100 machinability for AISI 1212 steel) 65 65

    5. Forging of Material 8620 Steel

    AISI

    8620 alloy steel is forged at a start temperature of around 2250ºF
    (1230ºC) down to approximately 1700ºF(925ºC.) prior to the hardening
    heat treatment or carburizing. The alloy is air cooled after forging.

    6. ASTM 8620 Steel Heat Treatment

    • Annealing

    AISI

    8620 steel may be given a full anneal by heat to 820℃ – 850℃, and hold
    until temperature is uniform throughout the section and cool in furnace
    or air cooled.

    • Tempering

    Tempering

    of heat treated and water quenched parts of 8620 steels (not
    carburized) is done at 400 F to 1300 F to improve case toughness with
    minimal effect on its hardness. This will also reduce the possibility of

    grinding cracks.

    • Hardening

    The

    AISI steel 8620 will be austenitized at around 840°C – 870°C, and oil
    or water quenched depending upon section size and intricacy. Cool in Air

    or Oil required.

    • Normalizing

    1675ºF

    (910ºC) and air cool. This is another method of improving machinability

    in 8620 material; normalizing might also be used prior to case
    hardening.

    7. Machinability of SAE 8620 Steel

    The

    8620 alloy steel is readily machined after heat treatment and/or
    carburizing, should be at a minimum so as not to impair the hardened
    case of the part. Machining may be done by conventional means prior to
    heat treatment – after carburizing machining is usually limited to
    grinding.

    8. Welding of 8620 Materials

    The
    alloy 8620 may be welded as rolled condition by conventional methods,
    usually gas or arc welding. Preheating at 400 F is beneficial and
    subsequent heating after welding is recommended – consult the approved
    weld procedure for the method used. However, welding in the case
    hardened or through hardened condition is not recommended

    9. Application of ASTM 8620 Steel

    AISI

    8620 steel material is used extensively by all industry sectors for
    light to medium stressed components and shafts requiring high surface
    wear resistance with reasonable core strength and impact properties.

    Typical

    applications are: Arbors, Bearings, Bushings, Cam Shafts, Differential
    Pinions, Guide Pins, King Pins, Pistons Pins, Gears, Splined Shafts,
    Ratchets, Sleeves and other applications where it is helpful to have a
    steel that can be readily machined and carburized to controlled case
    depths.

  • Previous:
  • Next:



  • Manufacturers::ACCURL
    E-mail :Info@Accurl.com / ahlaifu@Gmail.com
    Security requirements:CE and NR12
    Cell phone:+86-13335550823 (WhatsApp)

    Fiber Laser Slicing Device Gain:
    (1) Fiber laser reducing device is for metallic exact reducing run by fiber laser know-how. The high-quality fiber laser beam final results in more quickly reducing speeds and better high-quality cuts compared to other reducing answers. The critical edge of a fiber laser is its quick beam wavelength (1,064nm). The wavelength, which is ten instances decrease than that of C02 laser, generates higher absorption into metals. This will make the fiber laser come to be a fantastic resource for reducing metallic sheets of stainless steel, carbon steel, mild steel, aluminum, brass, etc.
    (2) The efficiency of a fiber laser significantly exceeds conventional YAG or CO2 laser. The fiber laser beam is able of reducing reflective metals with substantially significantly less electrical power as the laser is absorbed into the metallic getting reduce. The device will consume minor to no electrical power when not active.
    (3) Yet another edge of fiber laser is the use of highly trustworthy solitary emitter diodes with projected lifetimes larger than a hundred,000 hrs of continual or pulsed operation.
    (4) ACCURL Laser software program permits for the capacity to management energy, modulation rate, pulse width and pulse shape providing the person entire management of the lasers abilities.

    Fiber Laser Slicing Device Functions:
    1. Double ball screw close-loop method and imported open-type CNC method, ensure higher accuracy and higher doing the job efficiency during higher speed reducing.
    2. fiber laser reducing device outfitted with fiber laser 500W, 1000W, 2000W, 3000W (optional). Very low running and servicing costs. Obtain lengthy-phrase return on expense and income maximization.
    3. Enclosure layout conforms to CE common for trustworthy and safe and sound processing. Pallet changer is effortless for product uploading and unloading and even more improving doing the job efficiency.
    4. Aiming at higher speed reducing, strengthened welded device entire body following 2 instances of growing older system, making sure lengthy-phrase accuracy and security of general performance.
    5. Twin-stress gas management method of 3 gas resources (higher stress air, nitrogen, oxygen) satisfies the processing need of all types of metals. Straightforward operation and very low cost.
    6. Automatic nesting software program (which include product administration and optimized processing know-how) and furnishing with database of system parameters for quick operation and easy administration.
    seven. Optimized optical lens, specifically designed nozzle and sensor know-how recognize extra secure and smooth reducing. Optional collocation of 2000mmX4000mm, 2000mmX6000mm doing the job desk.

    Laser Slicing Device Much better Performance, More Rigid and Sturdy Building
    A. Leading high-quality components
    B. Integrated circuit (skilled circuit board)
    C. Rigid device resource and mass loading doing the job
    Laser Slicing Device Large Proficiently
    A. Travelling speed increases utmost
    B. Slicing software program features improved
    C. Nesting software program optimized reducing patch (can immediately browse CAD)
    Laser Slicing Device More Protected and Help save Labor
    A. Device framework and electric circuit layout and assembly conform with CE and Food and drug administration
    B. Assistant loading method and wi-fi distant management take care of
    C. Lubrication method
    Laser Slicing Device More Optimized Technique
    A. Different laser reducing heads and optimized nozzle
    B. Three gas supply and twin-stress gas route
    C. Strong software program assist
    Laser Slicing Device Bigger Precision
    A. Thoroughly closed loop controlling method
    B. Slicing compensation
    C. Leading accuracy tests machine



    Women Watchs Quartz Watch Dermis Rivet Retro Leather Bracelet Watch red band white dial (Intl) ซื้อเลยคลิก http://ho.lazada.co.th/SHM7xD ซื้อของออนไล…

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car