Special Design for H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Wholesale to Algeria
H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19. AISI H-13 tool steel is characterized by: Good resistance to abrasion at both low and high temperatures High level of toughness and ductility Uniform and high level of machinability and polishability Good high-temperature strength and resistance to t...
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Special Design for H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Wholesale to Algeria, we have built a reliable reputation among many customers. Quality&customer first are always our constant pursuit. We spare no efforts to make better products. Look forward to long-term cooperation and mutual benefits!
is chromium hot work tool steels which are widely used in hot and cold work tooling applications. is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19.
AISI H-13 tool steel is characterized by:
Good resistance to abrasion at both low and high temperatures
High level of toughness and ductility
Uniform and high level of machinability and polishability
Good high-temperature strength and resistance to thermal fatigue
Excellent through-hardening properties
Very limited distortion during hardening
steel H13, the molybdenum and vanadium act as strengthening agents. The
chromium content assists die steel H-13 to resist softening when used
at high temperatures. H-13 die steels offers an excellent combination of
shock and abrasion resistance, and possesses good red hardness. It is
capable of withstanding rapid cooling and resists premature heat
checking. Tool Steel H13 has good machinability, good weldability, good
ductility, and can be formed by conventional means.
Due to H13
tool steel excellent combination of high toughness and fatigue
resistance, AISI H13 hot work tool steel is used more than any other
tool steel in tooling applications.
1. Common H13 Tool Steel Related Specifications
2. H13 Tool Steel Chemical Composition
|DIN ISO 4957||C||Mn||P||S||Si||Cr||V||Mo|
3. AISI H13 Steel Mechanical Properties
|Tensile strength, ultimate (@20°C/68°F, varies with heat treatment)||1200 – 1590 MPa||174000 – 231000 psi|
|Tensile strength, yield (@20°C/68°F, varies with heat treatment)||1000 – 1380 MPa||145000 – 200000 psi|
|Reduction of area (@20°C/68°F)||50.00%||50.00%|
|Modulus of elasticity (@20°C/68°F)||215 GPa||31200 ksi|
4. Forging of H13 Tool Steel
Heating for forging must be done slowly and uniformly. Soak through at
1900°-2000°F and reheat as often as necessary, stopping work when the
temperature drops below 1650°F. After forging, cool slowly in lime,
mica, dry ashes or furnace. H-13 should always be annealed after
5. Heat Treatment for H13 Tool Steels
slowly to 1550°-1650°F, hold until entire mass is heated through, and
cool slowly in the furnace (40F per hour) to about 1000°F, after which
cooling rate may be increased. Suitable precautions must be taken to
prevent excessive carburization or decarburization.
desirable to relieve the strains of machining, heat slowly to
1050°-1250°F, allow to equalize, and then cool in still air (Strain
Preheat Prior to Hardening
Warm slightly before charging into the preheat furnace, which should be operating at 1400°-1500°F.
tool steel is a steel having very high hardenability and should be
hardened by cooling in still air. The use of a salt bath or controlled
atmosphere furnace is desirable to minimize decarburization, and if not
available, pack hardening in spent pitch coke is suggested. The
temperature employed is usually 1800°-1850°F, depending on size section.
in still air or dry air blast. If complicated forms are to be hardened,
an interrupted oil quench can be used. Quench part in oil and remove
from bath when it just loses its color (1000°-1100°F). Finish cooling to
below 150°-125°F in air, then temper immediately.
practice may vary with size and application, but is usually performed
in the range of maximum secondary hardness or higher. Double tempering
is recommended. The results below is H13 that was air quenched from
1800°F and tempered for 4 hours at various temperatures. The results may
be used as a guide, keeping in mind that parts of heavy section or mass
may be several points lower in hardness.
6. Application of AISI H13 Tool Steel
As Tools for Extrusion
|Part||Aluminium, magnesium alloys, HRC||Copper alloys HRC||Stainless steel HRC|
|Dies, Backers, die-holders, liners, dummy blocks, stems||44-50||43-47||45-50|
As Plastic Molding Tool Steel
|Injection molds Compression/ transfer molds||1,870-1,885°F (1,020-1,030°C)||50-52|
|Tempering 480°F (250°C)|
|Severe cold punching, scrap shears||1,870-1,885°F||50-52|
|Tempering 480°F (250°C)|
|Tempering 480°F (250°C) or|
|Shrink rings (e.g. for cemented carbide dies)||1,870-1,885°F||45-50|
|Tempering 1,070°F (575°C)|
there are any queries about AISI H13 tool steel for hot working
applications, please feel free to leave a comment below. And welcome
enquiry of AISI H13 tool steel, we are professional and reliable
supplier for prime H13 tool steel materials.
Watch our Gear Punch Knockout Tool cut through 10ga. stainless steel like butter. The Gear Punch is designed to punch through both stainless steel and mild steel one tool for all your panel or box needs.
Knock – Outs 1/2″ through 6″
Draw Stud (lifetime Warranty)
Step Bits Helical TiAn Coated
3/8″ Nut Drivers
Center Point Knockout Layout tool
Fast and Easy With Cordless Drill
No Leaking Hydraulics
No Hydraulic Seals to Replace
Email: firstname.lastname@example.org / www.goldenlaser.org / www.vtopfiber.com / www.golden-laser.com.cn / whatsapp(tel):+86-15071258391 / skype: goldenlaser-jaenymay
Golden Laser Pipe Laser Cutting Machine Objectives
Presenting the highest cost effectiveness tube cutting machine for global customers.Focus on professional applications.
Fiber laser cutting tube / pipe cutting machine P2060A features
♦ Can cut lines and holes with different diameters from different directions on the pipe,and meet centrifugal and non-centrifugal vertical intersection condition for branch and main pipe axis.
♦ Can cut column Crossed Lines at the end of branch pipe,and meet centrifugal non-centrifugal vertical intersection condition for branch and main pipe axis.
♦ Can cut inclined with the main circular pipe.
♦ Can cut branch pipe intersected with the main circular pipe.
♦ To realized angel groove face,square hole,waist-shaped holes cutting.
♦ Fully automatic CNC laser tube cutting machine, which utilizes an automatic loader and unloader allowing this machine to run continuously with minimal operator involvement.
A. Fiber Laser Tube Cutting Machine Applicable Materials
Stainless steel,carbon steel,mild steel,aluminum,brass,copper,alloy metal materials etc.
B. Laser Pipe Cutting Machine Applicable Industries
Chairs, Metal Tables legs, Chair legs,Cots, Cabinet, TV Stands, TV Antennas,Doors,stainless steel table legs, Bed Frames
Handle Bar,Steering Column,Main Beam,Bottom Chassis…
Elliptical and Round Cooling Tubes
Scaffoldings & Supporting pipes
Handle Bar, Top Tube, Bottom Tube, Down Tube, Chain Stay, Back Stay, Stem Tube, Pedail Tube, Seat Pillar, Fork Blade.
Bus body structures, main beam for pedestal lfans,textile,Frames…
® Oil Industry
Perforating gun tube
® Medical Device
® Fire Control
C. Cutting standard types of pipe :
Round pipe, square tube, OB, D type tube, triangular tube, oval tube
Such as size through the abnormity tube
At the same time, flex3d have profile cutting function module, can cut Angle steel, channel steel, H steel etc.
Automatic Bundle Loader Fiber Laser Metal Tube Cutting Machine Technical Parameters
Model Number: P2060A / P3080A / P30120
Tube length: 6000mm / 8000mm / 12000mm
Tube diameter: 20-200mm / 20-300mm
Laser source : IPG /N -light fiber laser resonator
Laser head: Raytools laser cutting head
Servo Motor: 4 servo motors for all axial movements
Laser source power: 700w / 1000w / 2000w / 3000w
Position accuracy: ±0.03mm
Repeat position accuracy: ±0.01mm
Maximum position speed: 70m/min
Cutting speed: depend on material, laser source power
Electric power supply: AC380V 50/60Hz
1.What metal materials do u need to cut ? what’s the max tubelength,tube diameter and tube wall thickness?
2.What industry do u do ? and what’s the final cutting product?
3.Kindly leave the message of ur e-mail address,company name ？
After confirmed above questions,then we can recommend u with the suitable laser power for u.
Wuhan Golden Laser Co.,Ltd (Stock number: 300220)
Attn: Ms Jaeny May
E-mail: email@example.com | firstname.lastname@example.org
Website: http://www.goldenlaser.org | http://www.vtopfiber.com | http://goo.gl/ekpXTm