Special Design for EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory from Muscat
EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for Special Design for EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory from Muscat, If you have any comments about our company or products, please feel free to contact us, your coming mail will be highly appreciated.
is an important alloy engineering steel grade as per BS EN
10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
resistance to overheating, but the white sensitivity of 34CrNiM06 is
high. It also has the temper brittleness, so the weldability of
34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
temperature preheating before welding in order to eliminate the stress
after welding processing.
1.EN Steel 34CrNiMo6 Supply Range
Round Steel Bar Sizes: diameter 80mm – 1200mm
Other steel shape and sizes available according to your requirements.
Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.
2.EN 34CrNiMo6 Steel Standards And Equivalents
|BS EN 10083 -3: 2006||34CrNiMo6 / 1.6582||: 2004||4337|
|BS EN 10250 – 3: 2000|
3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties
|BS EN 10083 – 3:2006||34CrNiMo6
|0.30-0.38||0.5-0.8||0.40 max||0.025 max||0.035 max||1.3-1.7||0.15-0.30||1.3-1.7|
|BS EN 10250-3:2000||C||Mn||Si||P||S||Cr||Mo||Ni|
|0.30-0.38||0.5-0.8||0.40 max||0.035 max||0.035 max||1.3-1.7||0.15-0.30||1.3-1.7|
|ASTM A29: 2004||4337||C||Mn||Si||P||S||Cr||Mo||Ni|
|0.30-0.40||0.6-0.8||0.20-0.35||0.035 max||0.040 max||0.70-0.90||0.20-0.30||1.65-2.00|
4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel
|Properties||< 16||>16 – 40||>40 – 100||>100 – 160||>160 – 250|
|Thickness t [mm]||< 8||8<t<20||20<t<60||60<t<100||100<t<160|
|Yield strength Re [N/mm²]||min. 1000||min. 900||min. 800||min. 700||min. 600|
|Tensile strength Rm [N/mm2]||1200 – 1400||1100 – 1300||1000 – 1200||900 – 1100||800 – 950|
|Elongation A [%]||min. 9||min. 10||min. 11||min. 12||min. 13|
|Reduction of area Z [%]||min. 40||min. 45||min. 50||min. 55||min. 55|
|Toughness CVN [J]||min. 35||min. 45||min. 45||min. 45||min. 45|
5.Heat Treatment of 34CrNiMo6 Engineering Steel
Quenched and Tempered (Q+T) of 34CrNiMo6 Steel
Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;
Soak at this hardening temperature quench in oil;
Temper as soon as 34CrNiMo6 steels reach room temperature.
Heat uniformly to the suitable temperature;
Withdraw from the furnace and cool in the air.
The usual tempering temperature is 600°C which depending on the actual requirements.
6.Forging of DIN 34CrNiMo6 / 1.6582 Steel
Hot forming temperature: 1100-900oC.
7.Machinability of Steel 34CrNiMo6
is best done with this 1.6582 alloy steel in the annealed or normalized
and tempered condition. It can be machined by all conventional methods.
alloy materials can be fusion or resistance welded. Preheat and post
heat weld procedures should be followed when welding this alloy by
34CrNiMo6 steel is used to make tools which demands good plasticity and
high strength. It is usually selected to make the big size and important
parts, such as heavy machinery axle,turbine shaft blade, high load of
transmission parts, fasteners, crank shafts, gears, as well as heavily
loaded parts for motor construction etc.
Otai Steel is reliable to
supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
Please tell us your detailed requirements and have the best offer soon.
Shortcut to find square of any number. Limited Process to Come across Sq. of a number making use of this Maths methods.This is a quite Very simple Trick to Work out square of any number. This is a Maths Methods for acquiring squares with relieve. These aptitude methods make you to compute Sq. of any number quickly. For additional aptitude methods for placements keep on your stop by with us.
Will not squander your time in any evaluation by executing it squares manually, In this Video we will share Very simple Shortcut to find Sq. of a number. Use this shortcut system to find squares of any number as a outcome you have additional time in the evaluation to solve other Maths complications.
Aptitude Methods for Aggressive tests & Placement. We Govt. Jobs Portal ( WWW.GovtJobsportal.IN) will share additional maths methods like this in the forthcoming video clips. We suggest you all fascinated candidates who adore these forms of Maths Methods to Come across Sq. of any number , to subscribe our channel for additional Reasoning methods & Maths Methods in long term. Subscribe channel from below button for additional aptitude methods and strategies.
Essentially we share this maths methods for bank po exam oriented. This maths methods for quickly calculation is quite important for all the students. So watch this Maths methods tutorial quite meticulously to recognize the principle deeply. In long term we will share additional maths methods for aggressive tests. Together with the Maths methods we will also share reasoning methods for aggressive tests. Individuals who want to understand reasoning methods for aggressive tests can also subscribe this channel. So remain linked with us for additional maths methods for aggressive tests as very well as for reasoning methods.
You should watch: “Shortcut to find dice root of any number -How To Come across Cube root methods”
The video demonstrates the high-performance cutting capability of a HELLER 4-axis machining centre H2000. In this example the manufacturing of a jet engine mounting bracket the cycle time could be reduced from hours to minutes – with a HELLER
For further information refer to http://www.heller.biz/en/products/4-axis-machining-centres/