Short Lead Time for AISI304| SUS304| EN1.4948 Manufacturer in Somalia

Short Lead Time for
 AISI304| SUS304| EN1.4948 Manufacturer in Somalia

Short Description:

Chemical Composition of Stainless Steel 304 Table 1. Chemical composition for 304 stainless steel alloys % 304 304L 304H C 0.0 – 0.07 0.0 – 0.03 0.04 – 0.08 Mn 0.0 – 2.0 0.0 – 2.00 0.0 – 2.0 Si 0.0 – 1.00 0.0 – 1.00 0.0 – 1.0 P 0.0 – 0.05 0.0 – 0.05 0.0 – 0.04 S 0.0 – 0.03 0.0 – 0.02 0.0 – 0.02 Cr 17.50 – 19.50 17.50 – 19.50 ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for Short Lead Time for AISI304| SUS304| EN1.4948 Manufacturer in Somalia, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.


    Chemical Composition of Stainless Steel 304

    Table 1. Chemical composition for 304 stainless steel alloys

    %

    304

    304L

    304H

    C

    0.0 – 0.07

    0.0 – 0.03

    0.04 – 0.08

    Mn

    0.0 – 2.0

    0.0 – 2.00

    0.0 – 2.0

    Si

    0.0 – 1.00

    0.0 – 1.00

    0.0 – 1.0

    P

    0.0 – 0.05

    0.0 – 0.05

    0.0 – 0.04

    S

    0.0 – 0.03

    0.0 – 0.02

    0.0 – 0.02

    Cr

    17.50 – 19.50

    17.50 – 19.50

    17.00 – 19.00

    Ni

    8.00 – 10.50

    8.00 – 10.50

    8.00 – 11.00

    Fe

    Balance

    Balance

    Balance

    N

    0.0-0.11

    0.0-0.11

    0.0 – 0.10

    Properties of Stainless Steel 304

    Mechanical Properties of Stainless Steel 304

    Table 2a. Mechanical properties for 304 stainless steel alloys – sheet up to 8 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    540 – 750

    520 – 700

    -

    Proof Stress (MPa)

    230 Min

    220 Min

    -

    Elongation A50 mm

    45 Min %

    45 Min %

    -


    Table 2b. Mechanical properties for 304 stainless steel alloys – plate from 8 – 75 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    520 – 720

    500 – 700

    -

    Proof Stress (MPa)

    210 Min

    200 Min

    -

    Elongation A5

    45 Min %

    45 Min %

    -


    Table 2c. Mechanical properties for 304 stainless steel alloys – bar and section up to 160 mm diameter / thickness

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    500 – 700

    500 – 700

    500 – 700

    Proof Stress (MPa)

    190

    175 Min

    185 Min

    Elongation A50 mm

    45 Min %

    45 Min %

    40 Min %

    Hardness Brinell

    215 Max HB

    215 Max HB

    -

    Physical Properties of Stainless Steel 304

    Table 3. Physical properties for 304 stainless steel alloys

    Property

    Value

    Density

    8.00 g/cm3

    Melting Point

    1450 °C

    Modulus of Elasticity

    193 GPa

    Electrical Resistivity

    0.072 x 10-6 Ω.m

    Thermal Conductivity

    16.2 W/m.K

    Thermal Expansion

    17.2 x 10-6 /K

    Alloy Designations

    Stainless steel 304 also corresponds to the following standard designations and specifications:

    Euronorm

    UNS

    BS

    En

    Grade

    1.4301

    S30400

    304S15

    304S16

    304S31

    58E

    304

    1.4306

    S30403

    304S11

    -

    304L

    1.4307

    -

    304S11

    -

    304L

    1.4311

    -

    304S11

    -

    304L

    1.4948

    S30409

    304S51

    -

    304H

    Corrosion Resistance of Stainless Steel 304

    Stainless steel 304
    has excellent corrosion resistance in a wide variety of environments
    and when in contact with different corrosive media. Pitting and crevice
    corrosion can occur in environments containing chlorides. Stress
    corrosion cracking can occur at temperatures over 60°C.

    Heat Resistance of Stainless Steel 304

    Stainless steel 304 has
    good resistance to oxidation in intermittent service up to 870°C and in
    continuous service to 925°C. However, continuous use at 425-860°C is
    not recommended if corrosion resistance in water is required. In this
    instance 304L is recommended due to its resistance to carbide
    precipitation.

    Where high strength is required at temperatures above 500°C and up to
    800°C, grade 304H is recommended. This material will retain aqueous
    corrosion resistance.

    Fabrication of Stainless Steel 304

    Fabrication of all stainless steels should
    be done only with tools dedicated to stainless steel materials. Tooling
    and work surfaces must be thoroughly cleaned before use. These
    precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.

    Cold Working of Stainless Steel 304

    Stainless steel 304 readily
    work hardens. Fabrication methods involving cold working may require an
    intermediate annealing stage to alleviate work hardening and avoid
    tearing or cracking. At the completion of fabrication a full annealing
    operation should be employed to reduce internal stresses and optimise
    corrosion resistance.

    Hot Working of Stainless Steel 304

    Fabrication methods, like forging, that involve hot working should
    occur after uniform heating to 1149-1260°C. The fabricated components
    should then be rapidly cooled to ensure maximum corrosion resistance.

    Heat Treatment of Stainless Steel 304

    Stainless steel 304 cannot be hardened by heat treatment.

    Solution treatment or annealing can be done by rapid cooling after heating to 1010-1120°C.

    Machinability

    Stainless steel 304 has good machinability. Machining can be enhanced by using the following rules:

    • Cutting edges must be kept sharp. Dull edges cause excess work hardening.

    • Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.

    • Chip breakers should be employed to assist in ensuring swarf remains clear of the work

    • Low thermal conductivity of austenitic alloys results in heat
      concentrating at the cutting edges. This means coolants and lubricants
      are necessary and must be used in large quantities.

    Welding of Stainless Steel 304

    Fusion welding performance for Stainless steel 304 is excellent both with and without fillers. Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel.
    For 304L the recommended filler is 308L. Heavy welded sections may
    require post-weld annealing. This step is not required for 304L. Grade
    321 may be used if post-weld heat treatment is not possible.

    Applications of Stainless Steel 304

    Stainless steel 304 is typically used in:

    • Sinks and splashbacks

    • Saucepans

    • Cutlery and flatware

    • Architectural panelling

    • Sanitaryware and troughs

    • Tubing

    • Brewery, dairy, food and pharmaceutical production equipment

    • Springs, nuts, bolts and screws

  • Previous:
  • Next:



  • If you’re looking for Top Laser Cutting Services in Dubai – UAE, then you are in the right place!
    Contact Contact Us Now: +971 04 321 9366 | email: laser@lasercraft.ae

    http://lasercraft.ae

    laser cutting shop in dubai – BCL 1830B CNC Laser Cutting Engraving Machine for Acrylic/Wood/Metal,, Laser Cutting, New, CO2
    Vinyl cutting machine and heat press

    CNC Fiber laser cutting machine for metal sheet Laser Engraving and Cutting Machine · 40W USB CO2 Laser Engraving Cutting Machine Engraver Cutter w/CorelDraw Software 40W High Precision CO2 Laser Cutting Engraving Machine with USB Port
    UAE Online Yellowpages providing business listings of Laser Cutting in UAE with their contact details, emails, websites Gold Coast Laser Cutting in Ormeau, QLD, 4208
    com – Laser Cutting Stainless Steel design ideas and photos
    China laser cutting mild steel/carbon steel services for metal screens, metal art work, machining spare parts Laser cutting sheet metal gives superior cut-edge quality, parallel sides and no burrs
    Laser Cutting Engraving Wood is one of our many specialties
    40W USB CO2 Laser Engraving Cutting Machine Engraver Cutter w/CorelDraw Software
    80W Co2 USB Laser Cutter Engraver Laser Cutting Engraving Machine with Stand
    Subcon Laser Cutting is one of the best 5 axis laser cutting companies in the UK and offers a comprehensive service

    Wood laser cutting machine working video
    CNC CO2 Laser · CNC Laser Cutting Machine · CNC Laser Engraving Machine
    Laser cutting and laser drilling this video shows a 5 axis laser cutting machine in operation.

    Contact Now1290 CO2 Wood Laser Engraving Cutting Machine1290 co2 laser cutting engraving machine for acrylic mdf wood 1 Medamullet – 2011-09-14 11:53 AM I have access to a vinyl cutting machine and heat press 500W 1KW 2KW CNC fiber metal laser cutting machine for metal cutting
    Laser Engraving and Cutting Machine CTK-6090K
    Co2 Laser Cutting Engraving Machine Gold Coast Laser Cutting & Plastic Fabrication Pty Ltd – Plastics Products Manufacturers And Wholesalers in Molendinar (Queensland), Australia

    Figure 1: A schematic of the cut zone when laser cutting stainless steel When laser cutting mild steel, does the material develop a hardened edge
    Laser Cutting Sheet Metal Moving Sheet Laser Cutting System Advantages of laser cutting engraving wood

    100W Laser Engraving Cutting Machine CO2 Engraver Cutter High Precise USB Port

    Hot Sale Carbon Fiber Laser Cutting Engraving Machine Price · Jinan Bodor CNC Machine Co
    Mixed CO2 laser cutting machine working for 2mm galvanized sheet perforation

    Find and save ideas about Cnc laser cutting machine on Pinterest, the world’s catalog of ideas
    7261 Results – Promotion price cnc 3D laser cutting engraving machine for acrylic wood leather fabric MDF cnc co2 laser I have Vinyl cutting machine and heat press machine (it’s for my tennis apparel line ^_^)



    Invicta Mens 1692 Cuadro Chronograph Black Dial Stainless Steel Watch

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star