Reliable Supplier EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel South Africa
EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...
We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for Reliable Supplier EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel South Africa, we are looking forward to even greater cooperation with overseas customers based on mutual benefits. Please feel free to contact us for more detail
is an important alloy engineering steel grade as per BS EN
10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
resistance to overheating, but the white sensitivity of 34CrNiM06 is
high. It also has the temper brittleness, so the weldability of
34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
temperature preheating before welding in order to eliminate the stress
after welding processing.
1.EN Steel 34CrNiMo6 Supply Range
Round Steel Bar Sizes: diameter 80mm – 1200mm
Other steel shape and sizes available according to your requirements.
Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.
2.EN 34CrNiMo6 Steel Standards And Equivalents
|BS EN 10083 -3: 2006||34CrNiMo6 / 1.6582||: 2004||4337|
|BS EN 10250 – 3: 2000|
3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties
|BS EN 10083 – 3:2006||34CrNiMo6
|0.30-0.38||0.5-0.8||0.40 max||0.025 max||0.035 max||1.3-1.7||0.15-0.30||1.3-1.7|
|BS EN 10250-3:2000||C||Mn||Si||P||S||Cr||Mo||Ni|
|0.30-0.38||0.5-0.8||0.40 max||0.035 max||0.035 max||1.3-1.7||0.15-0.30||1.3-1.7|
|ASTM A29: 2004||4337||C||Mn||Si||P||S||Cr||Mo||Ni|
|0.30-0.40||0.6-0.8||0.20-0.35||0.035 max||0.040 max||0.70-0.90||0.20-0.30||1.65-2.00|
4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel
|Properties||< 16||>16 – 40||>40 – 100||>100 – 160||>160 – 250|
|Thickness t [mm]||< 8||8<t<20||20<t<60||60<t<100||100<t<160|
|Yield strength Re [N/mm²]||min. 1000||min. 900||min. 800||min. 700||min. 600|
|Tensile strength Rm [N/mm2]||1200 – 1400||1100 – 1300||1000 – 1200||900 – 1100||800 – 950|
|Elongation A [%]||min. 9||min. 10||min. 11||min. 12||min. 13|
|Reduction of area Z [%]||min. 40||min. 45||min. 50||min. 55||min. 55|
|Toughness CVN [J]||min. 35||min. 45||min. 45||min. 45||min. 45|
5.Heat Treatment of 34CrNiMo6 Engineering Steel
Quenched and Tempered (Q+T) of 34CrNiMo6 Steel
Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;
Soak at this hardening temperature quench in oil;
Temper as soon as 34CrNiMo6 steels reach room temperature.
Heat uniformly to the suitable temperature;
Withdraw from the furnace and cool in the air.
The usual tempering temperature is 600°C which depending on the actual requirements.
6.Forging of DIN 34CrNiMo6 / 1.6582 Steel
Hot forming temperature: 1100-900oC.
7.Machinability of Steel 34CrNiMo6
is best done with this 1.6582 alloy steel in the annealed or normalized
and tempered condition. It can be machined by all conventional methods.
alloy materials can be fusion or resistance welded. Preheat and post
heat weld procedures should be followed when welding this alloy by
34CrNiMo6 steel is used to make tools which demands good plasticity and
high strength. It is usually selected to make the big size and important
parts, such as heavy machinery axle,turbine shaft blade, high load of
transmission parts, fasteners, crank shafts, gears, as well as heavily
loaded parts for motor construction etc.
Otai Steel is reliable to
supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
Please tell us your detailed requirements and have the best offer soon.
You can order ‘Personally’ now on iTunes: http://georiot.co/1KaX
“We dedicate this video to our mentor; the legendary King Of Pop
The late Michael Jackson, who still inspires us ‘Personally’.” – P-Square
Music video by P-Square performing Personally. (C) 2013 Square Records.
1980 CJ5 Jeep
258 6 cyl
Lifted on 35′s
Geared and locked front and rear!
This jeep has been rebuilt and reconditioned from the ground up, Inside and out!
Spring over lift ( about 8in of lift)
35×12.50×15 Xtreme Mud terrains. 5 full size wheels and tires ( BRAND NEW!)
Brand new Full Besttop Softtop
New break lines
new breaks front and rear
JKS quick disconnects
Full body bushing master kit… All Bushings have been replaced on this jeep. Including tranny mount.
U bolt kits, spring perches
New Toxic shocks
winch ready bumper
Motor reconditioned( didnt need a rebuild) All the small things NEW, Carburator, cables, starter, alternator, solonoid, Optima red top, hoses, etc
Brand new radiator with transferable liftime warrantee
Headman Headers, Custom exhaust
Brand new besttop short seats
Shift linkage and tranny rebuilt
Stainless guage cover
Full interior tub sprayed with bed liner
Brand new keyless stainless steel “Flaming River” steering column with tilt wheel, with brand new Grant steering wheel
New lap belts
ALL switches and interior lights NEW- wiper switch, heater switch, Headlight switch, all new cables
Full ROll bar kit
Front and rear gears ( 4.56)
Front and rear Detroit lockers
Rubicon Express Front and rear drive shafts with full yolks
Brand new Warn Hubs