Professional High Quality C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Manufacturer in Bhutan

Professional High Quality C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Manufacturer in Bhutan

Short Description:

Steel C45 Round Baris an unalloyed medium carbon steel, which is also a general carbonengineering steel. C45 is a medium strength steel with goodmachinability and excellent tensile properties. C45 round steel isgenerally supplied in the black hot rolled or occasionally in thenormalised condition, with a typical tensile strength range 570 – 700Mpa and Brinell hardness range 170 – 210 in either condition. It doesnot however respond satisfactorily to nitriding due to a lack ofsuitable alloying e...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for Professional High Quality C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Manufacturer in Bhutan, We sincerely welcome both foreign and domestic business partners, and hope to work with you in the near future!


    Steel C45 Round Baris
    an unalloyed medium carbon steel, which is also a general carbon
    engineering steel. C45 is a medium strength steel with good
    machinability and excellent tensile properties. C45 round steel is
    generally supplied in the black hot rolled or occasionally in the
    normalised condition, with a typical tensile strength range 570 – 700
    Mpa and Brinell hardness range 170 – 210 in either condition. It does
    not however respond satisfactorily to nitriding due to a lack of
    suitable alloying elements.

    C45 round bar steel is equivalent to EN8 or 080M40.
    Steel C45 bar or plate issuitable for the manufacture of parts such as
    gears, bolts, general-purpose axles and shafts, keys and studs.


    1. Supply Rangeof Steel C45 Round Bar

      C45 Steel Round Bar: diameter 8mm – 3000mm

      C45Steel Plate: thickness 10mm – 1500mm x width 200mm – 3000mm

      C45 Steel Flat Bar: 200mm – 1000mm

      Square C45 Steel: 20mm-800mm

      Hexagon Steel.

      Surface Finish:Black, Rough Machined, Turned or as per given requirements.

      2. Common C45Steel Specifications

      Country USA British Japan Australia
      Standard ASTM A29 EN 10083-2 JIS G4051 AS 1442
      Grades 1045 C45/1.1191 S45C 1045

      3. C45 RoundBar Steel Chemical Composition Properties

      Standard Grade C Mn P S Si Ni Cr
      ASTM A29 1045 0.43-0.50 0.60-0.90 0.04 0.050  -  -  -
      EN 10083-2 C45/1.1191 0.42-0.50 0.50-0.90 0.03 0.035 0.04 0.4 0.4
      JIS G4051 S45C 0.42-0.48 0.60-0.90 0.03 0.035 0.15-0.35  -  -

      4. Mechanical Properties ofC45 Round Bar Steel Material

        Mechanical Properties in Quenched+Tempered Condition

        Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5(%) Reduction Z (%)
        <16 <8 min. 490 700-850 min. 14 min. 35
        <17-40 <8<=20 min. 430 650-800 min. 16 min. 40
        <41-100 <20<=60 min. 370 630-780 min. 17 min. 45

          Mechanical Properties in Normalized Condition

          Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5(%)
          <16 <16 min. 390 min. 620 min. 14
          <17-100 <16<=100 min. 305 min. 305 min. 16
          <101-250 <100<250 min. 275 min. 560 min. 16

          5. Forging of Carbon Steel C45 Round Bar

          Hot forming temperature: 850-1200oC.

          Pre
          heat to 750 oC – 800 oC, then continue heating to 1100 oC – 1200 oC
          maximum, hold until temperature is uniform throughout the section and
          commence forging immediately. Forging is not workable below 850 oC.
          Finished forgingscould be air cooled.

          We are strong on forged steel C45 round bar. Welcome enquiry of C45 steel materials.

          6. DIN C45 Round BarSteel Grade Heat Treatment

          Forging or hot rolling: 1100 – 850°C
          Normalising: 840 – 880°C/air
          Soft annealing: 680 – 710°C/furnace
          Hardening: 820 – 860°C/water, oil
          Tempering: 550 – 660°C/air

          7. Hardening of DIN C45 Steel Hardening

          Harden from a temperature of 820-860oC followed by water or oil quenching.

          Heat
          to 820 oC – 850 oC hold until temperature is uniform throughout the
          section, soak for 10 – 15 minutes per 25mm of section, and quench in
          water or brine. Or,

          Heat to 830 oC – 860 oC soak as above and quench in oil.Temper immediately while still hand warm.

          Surface hardness for C45 special steel round bar after flame or induction hardning:

            Steel Name Steel number Surface Harndess

            C45 1.1191 min. 55 HRC

            8. Application of DIN Carbon SteelC45 Round Bar

            DIN
            C45 round bar steel material and steel plate C45, flats are widely used
            in all industry for uses which require more strength and wear
            resistance than the low carbon mild steel.

            Quenched and
            subsequently tempered steel for C45 steel grade round bar, steel plate,
            flat and square is used for axles, bolts, forged connecting rods,
            crankshafts, torsion bars, light gears, guide rods, screws, forgings,
            wheel tyres, shafts, sickles, axes, knives, wood working drills,
            hammers, etc.

            Welcome customers to inquiry DIN C45 round bar,
            CK45/1.1191 steelplate, flat steel for C45 steelprice. We are
            professional supplier and exporter for more than 20 years. We offer you
            worldwide solution forC45 round bar steel.


          • Previous:
          • Next:



  • http://www.lowcards.com/?p=7033

    A person of the most popular gifts this Xmas appears to be the stainless steel Starbucks present card.



    Thermex Metal Treating offers the widest range of ferrous metal heat treating processes available in Western Canada. Based out of Edmonton Alberta, Thermex strives to provide the best heat treating solutions.

    Parts can be treated to your exact specifications, or, for tough problems, you can call on our experienced metallurgical engineers to develop the best heat treatment solution for your application. Our Edmonton based in-house metallurgical testing lab (unique among heat treating operations in Western Canada) takes the guesswork out of heat treating process design and quality control.

    Services offered:
    • Carburizing & Carbonitriding
    • QPQ Liquid Nitriding
    • Induction Hardening
    • Gas Nitriding
    • Through Hardening
    • Annealing & Age Hardening
    • Metallurgical Lab

    Website: http://www.thermexmetal.com/
    Phone: +1 (780) 440-4373
    Twitter: @ThermexMetal

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House