Professional factory selling BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Serbia
BS EN 42crmo4 Alloy Steel is a common chromium-molybdenum steel that usually used after quenchedand tempered, with high intensity, high hardenability. BS EN 42CrMo4round steel has better performance than 34CrMo4 steel due to the carbonand chromium content is higher. 42CrMo4 alloy steel has higher strength and hardenability. The 42CrMo4 alloy material alsohas high fatigue strength and good low-temperature impact toughness. The temper brittleness is not obvious. Although 42CrMo4 steel is mo...
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for Professional factory selling BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Serbia, We are sincere and open. We look forward to your visit and establishing trustworthy and long-term standing relationship.
BS ENAlloy Steel
is a common chromium-molybdenum steel that usually used after quenched
and tempered, with high intensity, high hardenability. BS EN 42CrMo4
round steel has better performance than 34CrMo4 steel due to the carbon
and chromium content is higher.
has higher strength and hardenability. The 42CrMo4 alloy material also
has high fatigue strength and good low-temperature impact toughness. The
temper brittleness is not obvious.
Although 42CrMo4 steel is more expensive than 41Cr4 steel, it is more
preferable in terms of material properties. EN 42CrMo4 alloy
engineering steel materials have been widely used in automotive driving
elements. Otai Steel is able to supply you prime quality of 42CrMo4
alloy steel materials with wide range.
1.42CrMo4 Alloy Steel Supply Range
42CrMo4 Round bar Sizes: 80mm – 1200mm
Steel 42CrMo4 Flat and Plate: 10mm-1500mm thickness x 200-3000mm width
Other steel shape and sizes available according to your requirements.
Surface condition: Black, rough machined, peeled, turned or other requirements according to your requirements.
2.BS EN 42CrMo4 Alloy Steel Relevant Specifications and Equivalents
|BS EN 10250||Material No.||DIN||-3-1991||BS 970-1955||AS 1444||AFNOR|
3.42CrMo4 Alloy Steel Chemical Composition
|0.38-0.45||0.60-0.90||0.40 max||0.035 max||0.035 max||0.90-1.20||0.15-0.30|
4. DIN 42CrMo4 Alloy Steel Mechanical Properties
|Size Ø mm||Yield stress
|Ultimate tensile Stress,
KV, Joule, min.
|<40||750||1000-1200||11||295-355||35 at 20ºC|
|40-95||650||900-1100||12||265-325||35 at 20ºC|
|>95||550||800-950||13||235-295||35 at 20ºC|
5. Heat Treatment of 42CrMo4 Steels
Annealing of 42CrMo4 Steels
Heat steel 42CrMo4 forged steel slowly and thoroughly to 800-850°C;
Cool slowly in the furnace to the temperature 480°;
Complete annealing the steel in the air.
Quenched and Tempered (Q+T)
Heat 42CrMo4 steel slowly to 880°C;
Soak at this temperature then quench in oil;
Temper as soon as 42CrMo4 steel reach room temperature (20°C);
Heat uniformly to the suitable temperature of 560°C;
Withdraw the 42CrMo4 material from the furnace and cool in the air.
6. Forging of 42CrMo4 Alloy Steel
Preheat 42CrMo4 engineering steel uniformly and slowly;
Increase the forging temperature up to 1150-1200°C.
Always keep the forging temperature above at least 850°C
steel 42CrMo4 has only limited weldability. Preheating to 200-300°C is
strongly recommended; the upper limit should not be exceeded because of
risk for deterioration of the chrome layer.
Alloy steel 42CrMo4
can be friction welded. However, precautions are necessary so as to
limit the formation of undesirable microstructures in the welded zone.
8.Application of 42CrMo4 Alloy Steels
42CrMo4 alloy steel is widely used for engineering steel purpose, such
as: making various kinds of machinery, automobile, mining spare part,
the gearwheel of the engine, the driving gear of supercharger, the
connecting rob, the pinchock under the high pressure, parts for power
train applications, cold formed fastener components, shafts, gears,
drill collars for the oil exploration, etc.
Showing and shooting the Springfield M1-A, along with an “interesting” call from tnoutdoors9 while both of us are doing videos:
——————- PLEASE READ THE ENTIRE DESCRIPTION and PLEASE support the people who assist us! ———————We appreciate the INCREDIBLE support we get from BUD’s GUN SHOP, FEDERAL PREMIUM, and SONORAN DESERT INSTITUTE. They enable us to do the things we do. I hope you will support the people who support us; you know where and how to find them!
Federal Premium: http://www.federalpremium.com/
SDI (Sonoran Desert Institute): http://www.sdi.edu/
UPCOMING “MEET & GREETS” December 10th from 2:00 to 4:00. Sevierville, Tn, at Bud’s Gun Shop and Range. —————–I know it’s short notice, but we’re going to be at Bud’s Gun Shop and Range in Sevierville, Tn, to do a “Meet & Greet” to help with the Fire Relief Fund. We’ll be bringing a new DP-12 that Connecticut Shotgun gave us. It will be for a give-away to be held Saturday for those who are present. All donations will go to the Dollywood Foundation “My People Fund.” Hope you can make it; looking forward to meeting you as we all try to help out the fire victims there in the Gatlinburg area.
ALSO, everybody, REMEMBER to bookmark and/or subscribe over on FULL30. Regardless of social media policies and decisions, you’ll always be able to find our videos there: https://www.full30.com/channels/hickok45
By the way, before you ask a questions, go to the FAQ Video playlist and watch the short FAQ Videos. Most questions are answered there.
Sincerely, wish I could speak personally with all of you, or at least on line, and answer any question you might have, but the time and numbers prevent that.
Note: All shooting in our videos is done by professional shooters for instructional and entertainment purposes. Do not attempt to copy at home anything you see in our videos. Firearms can be extremely dangerous if not used safely.
(Note: These descriptions were last updated on 11-25-16. They are updated whenever new meet & greets are determined, or a new announcement is added.)
Anyang Forging Press (Group) Machinery Industry Co., Ltd is the biggest and best manufacturer of forging equipments and forging auxiliary machinery in China, also we are specialized in manufacturering hydraulic briquette press / baling press to process metal scrap and Hydraulic Riveting Machine for truck/bus chassis riveting field.
Anyang Forging Press Machinery Industry Co.,Ltd.
Tel: 0086-372-5986768 0086-372-5931234
My factory is a professional forging equipment supplier, an ISO9001 certificated company, with a history of more than 50 years of experience in producing forging equipments, forging equipments exported to more than 48 countries and region, we can offer following forging equipments:
1) Pneumatic Forging Hammers falling weight at 150kg, 250kg, 400kg, 560kg, 750kg, 1000kg and 2000kg
2) Electro-Hydraulic Open Die Forging Hammers capacity at 1T, 2T, 3T, 4T, 5T, 6 T, 7T, 8T, 10T.
3) Electro-Hydraulic Closed Die Forging Hammers capacity at 1T, 2T, 3T, 5T, 8T, 10T, 16T.
4) PLC Full hydraulic die forging hammers hitting energy at 16kj, 25kj, 31.5kj, 40kj, 50kj, 63kj, 80kj, 100kj.
5) Open Die Hot Forging Press at 800T, 1250T, 1600T, 2000T, 2500T, 3150T, 4000T, 5000T.
6) Forging Manipulators capacity at 1T, 2T, 3T, 4T, 5T, 6T, 8T to cooperate with open die forging hammers and forging presses.
7) Ring Rolling Machine from OD at 160mm to 5000mm.
We wish we can cooperate with your factory
If you want to know more about our products, please not hesitate to contact with me.
Pneumatic Forging Hammers
Electro-Hydraulic Open Die Forging Hammers
Electro-Hydraulic Closed Die Forging Hammers
PLC Full hydraulic die forging hammers
Open Die Hot Forging Press
Ring Rolling Machine