Original Factory 410 Stainless Steel Wholesale to Durban
410 Stainless Steel Mechanical Properties Condition Ultimate Tensile Strength (PSI) 0.2% Yield Strength (PSI) Elongation (% In 2in.) Reduction Of Area (%) Hardness Brinell Hardness Rockwell T 100,000 80,000 12 40 * * H 120,000 90,000 12 40 * * Annealed 70,000 40,000 16 45 * * Class2 110,000 85,000 15 45 269 Max * NACE MRO 175 * * * * * 410 Stainless Steel Applications Pump Shafts Valve Components Gas and Steam Turbine Components 410 Stainless Steel Composition Ca...
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs of Original Factory 410 Stainless Steel Wholesale to Durban, We cordially welcome customers from at home and abroad to join us and cooperate with us to enjoy a better future.
410 Stainless Steel Mechanical Properties
(% In 2in.)
410 Stainless Steel Applications
- Pump Shafts
- Valve Components
- Gas and Steam Turbine Components
410 Stainless Steel Composition
- Carbon 0.080-0.150
- Chromium 11.50-13.50
- Manganese 1.0 Max
- Phosphorus 1.0 Max
- Silicon 1.00 Max
- Sulfur 0.030 Max
Backed by Industry Standards
- UNS S41000
- ASTM A182
- ASTM A276
- ASTM A479
* i-Center indexable center drill
The world’s first indexable center drill.
Shortens set up and center drilling time.
Increases tool life, which reduces tooling cost.
NC2033: K20F grade carbide insert and TiAlN coated for carbon steel, alloy steel, high alloy
steel, cast iron and Al, Al-alloy, Cu, Cu-alloy.
2 cutting edges, high performance for center drilling.
Metric sizes: DIN 332 A+B, DIN 332 R , Ø1~Ø10 mm
Inch sizes: ANSI (BS) #2 ~10
Special inserts are available on request
* High Speed, High Feed Rate
High Performance speed and feed can be achieved due to the specially ground
insert and rigid holder design. For example, for drilling Ø3.15mm hole on alloy steel, running at 6000 r.p.m. and feed rate 600mm/min. (0.1mm/rev.)
* Easy Tool Length Setting
The axial position accuracy of the insert is 0.05mm ( .0 0 2″) . It is not necessary to reset
the tool length when changing insert or cutting edge.
* Excellent Repeatability
The insert is securely positioned by two locating
pins and clamped by one insert screw at the center.
The positioning repeatability of the insert is within 0.02 mm(.0008″) in radial direction,
thus ensuring conformity to any national standard.
* Extended Tool Life
Coolant can be supplied
through the center of the holder to increase performance and
extend tool life. Insert geometry, grades and coating process
are specifically engineered for centering applications.
* Universal and Easily Fitted with Any Available Shank
The tool holder is made of high alloy steel, hardened and ground to h6 tolerances
with a flat. It’s easy for both stationar y and rotating tools.
Nine9 Indexable Engraving Tool
This is a revolutionary new concept of engraving tools with indexable carbide inserts.
They offer you the ability to produce HIGH QUALITY ENGRAVING in most materials.
The latest coated carbide grades help you to obtain higher speed and feed rate,
dramatically reducing your cycle time.
• High Positive Rake Angle
Suitable for engraving all types of materials,
such as plastic, non-ferrous metal, aluminum, carbon steel and stainless steel.
• Multi-Side Grinding
Full peripherally ground insert to ensure effi cient repeatability.
It performs excellently without producing any burrs,
especially in aluminum and stainless steel.
• High Speed, High Feed Rate
Designed to run at high speed, up to 20000 r.p.m.
Feed rate 0.08mm (0.003″) / rev. apply to aluminum;
0.05mm (0.002″) / rev. apply to stainless steel.
Reduces engraving cycle time!
Each indexable insert has 2 cutting edges.
No resharpening required. Tool length is unchanged.
No need to reset after changing insert or cutting edge.
Universal for marking number and almost any character.
45° , 60° engraving inserts which can be used for marking serial numbers ;
product codes ; dial scales ; signs ; logo outlines and almost any character
which can be created by the NC programming system.