Online Exporter Metal Forms in Berlin
Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Ø Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker) Shafts Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg Discs, pu...
Reliable quality and good credit standing are our principles, which will help us at a top-ranking position. Adhering to the tenet of "quality first, customer supreme" for Online Exporter Metal Forms in Berlin, Let's cooperate hand in hand to jointly make a beautiful future. We sincerely welcome you to visit our company or contact us for cooperation!
Steel products can also be divided by their shapes. We can produce in the following shapes:
|Length||up to 16,000 mm|
|Round||from 80 to 1,200 mm Ø|
|Square||from 140 mm to 460 mm|
|Flat||from 30 x 25 mm to 2.000 x 600 mm
(in case of a smaller width correspondingly thicker)
|Barrel/flange diameter||up to 1.600 mm Ø|
|Length||up to 15.000 mm|
|Weight||from 10 kg to 35.000 kg|
Discs, punched discs, hubs
|Diameter||up to 1.200 mm
(smaller dias correspondingly thicker)
|Thickness||up to 600 mm|
Blocks, plates (forged three-dimensionally)
|Length||max. 6.000 mm|
|Width||max. 1.800 mm|
|Thickness||max. 1.000 mm
(in case of smaller thickness greater length and width)
|Weight||max. 30.000 kg|
Forged tubes, cylinders and other hollow forgings
|Inner diameter||160 mm to 600 mm|
|Length||up to 1,200 mm|
|Weight||up to 10.000 kg|
|Outer diameter||up to 2.400 mm|
|Height||up to 2.200 mm|
|Weight||up to 25.000 kg|
Seamless rolled rings
|Outer diameter||up to 3.500 mm|
|Height||up to 800 mm|
|Weight||10 kg to 8.000 kg|
We can also produce according to clients' designs. If you have your own design, just feel free to contact us.
Showing and shooting the Springfield M1-A, along with an “interesting” call from tnoutdoors9 while both of us are doing videos:
——————- PLEASE READ THE ENTIRE DESCRIPTION and PLEASE support the people who assist us! ———————We appreciate the INCREDIBLE support we get from BUD’s GUN SHOP, FEDERAL PREMIUM, and SONORAN DESERT INSTITUTE. They enable us to do the things we do. I hope you will support the people who support us; you know where and how to find them!
Federal Premium: http://www.federalpremium.com/
SDI (Sonoran Desert Institute): http://www.sdi.edu/
UPCOMING “MEET & GREETS” December 10th from 2:00 to 4:00. Sevierville, Tn, at Bud’s Gun Shop and Range. —————–I know it’s short notice, but we’re going to be at Bud’s Gun Shop and Range in Sevierville, Tn, to do a “Meet & Greet” to help with the Fire Relief Fund. We’ll be bringing a new DP-12 that Connecticut Shotgun gave us. It will be for a give-away to be held Saturday for those who are present. All donations will go to the Dollywood Foundation “My People Fund.” Hope you can make it; looking forward to meeting you as we all try to help out the fire victims there in the Gatlinburg area.
ALSO, everybody, REMEMBER to bookmark and/or subscribe over on FULL30. Regardless of social media policies and decisions, you’ll always be able to find our videos there: https://www.full30.com/channels/hickok45
By the way, before you ask a questions, go to the FAQ Video playlist and watch the short FAQ Videos. Most questions are answered there.
Sincerely, wish I could speak personally with all of you, or at least on line, and answer any question you might have, but the time and numbers prevent that.
Note: All shooting in our videos is done by professional shooters for instructional and entertainment purposes. Do not attempt to copy at home anything you see in our videos. Firearms can be extremely dangerous if not used safely.
(Note: These descriptions were last updated on 11-25-16. They are updated whenever new meet & greets are determined, or a new announcement is added.)
This professional crankshaft turning socket for LS engines is made of sturdy stainless steel. Just slip it easily over the end of your crankshaft, mount a degree wheel to the front of the socket and you’re ready to degree your cam. Visit http://www.enjoythedrive.com/ for more sema videos.