OEM Manufacturer D2 Tool Steel | 1.2379 | X153CrMo12 | SKD11 Wholesale to Bangkok

OEM Manufacturer
 D2 Tool Steel | 1.2379 | X153CrMo12 | SKD11 Wholesale to Bangkok

Short Description:

1. Relevant D2 Steel Specifications Country USA German Japan Standard ASTM A681 DIN EN ISO 4957 JIS G4404 Grades D2 1.2379/X153CrMo12 SKD11 2. D2 Tool Steel Chemical Composition ASTM A681 C Mn P S Si Cr V Mo D2 1.4 1.6 0.1 0.6 0.03 0.03 0.1 0.6 11 13 0.5 1.1 0.7 1.2 DIN ISO 4957 C Mn P S Si Cr V Mo 1.2379/X153CrMo12 1.45 1.6 0.2 0.6 0.03 0.03 0.15 1.6 11 13 0.7 1 0.7 1 JIS G4404 C Mn P S Si Cr V Mo SKD11 1.4 1.6 0.6 0.03 0.03 0.4 11 13 0.2 0.5 0.8 1.2 3. AISI Grade...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We always stick to the principle "Quality First, Prestige Supreme". We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for OEM Manufacturer D2 Tool Steel | 1.2379 | X153CrMo12 | SKD11 Wholesale to Bangkok, Our company will continue to adhere to the " superior quality, reputable, the user first " principle wholeheartedly. We warmly welcome friends from all walks of life to visit and give guidance, work together and create a brilliant future!


    1. Relevant D2 Steel Specifications

    Country USA German Japan
    Standard ASTM A681 DIN EN ISO 4957 JIS G4404
    Grades D2 1.2379/X153CrMo12 SKD11

    2. D2 Tool Steel Chemical Composition

    ASTM A681 C Mn P S Si Cr V Mo
    D2 1.4 1.6 0.1 0.6 0.03 0.03 0.1 0.6 11 13 0.5 1.1 0.7 1.2
    DIN ISO 4957 C Mn P S Si Cr V Mo
    1.2379/X153CrMo12 1.45 1.6 0.2 0.6 0.03 0.03 0.15 1.6 11 13 0.7 1 0.7 1
    JIS G4404 C Mn P S Si Cr V Mo
    SKD11 1.4 1.6 0.6 0.03 0.03 0.4 11 13 0.2 0.5 0.8 1.2

    3. AISI Grade D2 Steel Mechanical Properties

    Mechanical Properties Metric Imperial
    Hardness, Knoop (converted from Rockwell C hardness) 769 769
    Hardness, Rockwell C 62 62
    Hardness, Vickers 748 748
    Izod impact unnotched 77.0 J 56.8 ft-lb
    Poisson’s ratio 0.27-0.30 0.27-0.30
    Elastic modulus 190-210 GPa 27557-30457 ksi

    Thermal Properties

    Properties

    Conditions

    T (°C)

    Treatment

    Thermal expansion 10.4 x 10-6/ºC 20-100

    4. AISI/ASTM A681 D2 Grade Steel Forging

    Heating for forging of AISI D2 tool steel should
    be done slowly and uniformly. Soak through at 1850°-1950°F and reheat as often
    as necessary, stopping work when the temperature drops below 1700°F(926℃). After D2
    die steel forging, cool slowly in lime, mica, dry ashes or furnace. AISI D2 steel
    should always be annealed after forging.

    5. D2 Tool Steel Heat Treatment

    • Heat Treatment

    ASTM  D2 steels alloy should be preheated very slowly to 815oC (1500oF) and  then temperature can be increased to 1010oC (1850oF). They are then held  at 1010oC (1850oF) for 20 to 45 minutes and air cooled (air quenched).

    • Annealing

    Annealing  of D2 tool steels material should be done at 871 to 898oC (1600 to  1650oF) followed by slow furnace cooling at 4.4oC (40oF) per hour or  less.after which cooling rate may be increased. Suitable precautions  must be taken to prevent excessive carburization or decarburization.

    • Stress Relieving

    When  desirable to relieve the strains of machining, heat D2 grade steel  slowly to 1050°-1250°F, allow to equalize, and then cool in still air  (Strain Relieving).

    • Preheat Prior To Hardening

    Preheat slowly to 1350°-1450°F and hold at this temperature until grade steel D2 material is uniformly heated.

    • Hardening

    After  thorough preheating, heat to 1800°-1850°F. Hold the work piece at the  hardening temperature until it is completely and uniformly heated.

    • Quenching

    AISI  D2 steel tool material is an air hardening steel and will develop  hardness on cooling in still air. To avoid scaling and prevent  decarburization of the work piece surface, controlled atmosphere or  vacuum furnaces are recommended. If these furnaces are not available,  pack hardening, salt baths or wrapping the piece in stainless steel foil  will provide some degree of surface protection in the hardening  process. Parts should be allowed to cool to 150F, or to where they can  be held in the bare hand, and then temper immediately.

    • Tempering

    The  tempering temperature on material D2 steel may be varied according to  the desired hardness. D2 steels can be tempered at 204oC (400oF) for  achieving Rockwell C hardness of 61 and at 537oC (1000oF) for a Rockwell  C hardness of 54.

    6. D2 Tool Steel Material Application
     AISI grade D2 tool steels are used for long run tooling applications,  where wear resistance is important, such as blanking or forming dies and  thread rolling dies.

    Some main applications for D2 tool steel are as below:

    Blanking  Dies, Forming Dies, Coining Dies, Slitting Cutters, Heading Tools, Long  Punches, Forming Rolls, Edging Rolls, Master Tools, Beading Rolls,  Intricate Punches, Extrusion Dies, Drawing Dies, Lamination Dies, Thread  Rolling Dies, Shear Blades, Burnishing Tools, Gauges, Knurls, Wear  Parts.

    We usually hold D2 tool  steel on sale activities, and you would have our price on regular  schedule. Contact us and sign in our newsletter to have D2 tool steel  materials price list and commercial quote today.

  • Previous:
  • Next:



  • http://www.RexMetals.com Inconel Video contains overview, uses, and welding of the metal.

    [tig welding 4130]
    [bending 4130 tubing]
    [4130 plate steel]
    [4130 pipe]
    [astm a519 4130]
    [4130 steel suppliers]
    [aisi 4130 steel]
    [heat treating 4130]
    [4130 steel tubing]
    [aisi 4340]
    [4130 flat bar]
    [aisi 4130]
    [sae 4130]
    [4130 round bar]
    [4130 condition n]
    [4130 steel bar]
    [4130 seamless tubing]
    [4130 steel plate]
    [4130 normalized]
    [4130 annealed]
    [4130 steel tube]
    [4130 material]
    [aisi 4140]
    [steel 4130]
    [4130 welding rod]
    [4130 metal]
    [4140 round bar]
    [4130 steel]
    [4130 tubing supplier]
    [4130 tube suppliers]
    [4130 tubing]
    [4130 bar]
    [chromoly 4130]
    [4130 aircraft tubing]
    [4140 annealed]
    [alloy steel 4130]



    **FOR SALE** $25k THR Mustang Performance 550 HP Solid Roller 347 Stroker All Motor
    For Sale $25k 10 sec all motor Mustang Coupe THR Texas Hot Rods
    Call for more details (915) 449-6224 Brian

    THR Custom Solid Roller 347 Stroker
    Probe Dome 12.5:1 Pistons
    Probe 4340 Forged Ultralight I-Beam Rods
    Probe 4340 Forged Steel Stroker Crankshaft
    Edelbrock Victor Jr Single Plane Intake
    ProSystems Custom Carb 780 CFM
    Milodon Billet Main Cap Conversion
    Milodon Billet Main Support Girdle
    All ARP Bolts / ARP Head Studs
    Balanced & BluePrinted
    Jay Allen Camshaft Innovations Custom Solid Roller Billet Cam
    AFR Heads Solid Roller Springs to .750 lift
    .731/.705 Solid Roller Camshaft
    Link Bar Solid Roller Lifters (Comp Cams)
    FacePlated Tremec Trans / Ram Stage III Clutch Kit
    Aeromotive Braided Line Fuel System
    Aerospace Components Billet Drag Brakes
    Aerospace Components Billet Evac Pump
    MSD Ignition, MSD Billet Distributor, MSD Coil
    Taylor 10 mm 409 Race Wires
    CSR Elec Water Pump
    Weld Racing Pro Magnum Wheels/MT ET STREET Tires
    Moser Spool & Axles 4.56 Gears / Moser Billet Girdle
    THR Custom Basket Style Cage & Subframes
    473 RWHP / 435 RWTQ on Mustang Dyno ALL MOTOR PASS

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart