OEM manufacturer custom AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Wholesale to Sudan
AISI 4340 steel is a medium carbon, low alloy steel known for its toughness andstrength in relatively large sections. AISI 4340 is also one kind ofnickel chromium molybdenum steels. 4340 alloy steel is generallysupplied hardened and tempered in the tensile range of 930 – 1080 Mpa.Pre hardened and tempered 4340 steels can be further surface hardened by flame or induction hardening and by nitriding. The 4340 steel has goodshock and impact resistance as well as wear and abrasion resistanc...
We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for OEM manufacturer custom AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Wholesale to Sudan, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
is a medium carbon, low alloy steel known for its toughness and
strength in relatively large sections. AISI 4340 is also one kind of
nickel chromium molybdenum steels. 4340 alloy steel is generally
supplied hardened and tempered in the tensile range of 930 – 1080 Mpa.
Pre hardened and tempered 4340 steels can be further surface hardened by
flame or induction hardening and by nitriding. The 4340 steel has good
shock and impact resistance as well as wear and abrasion resistance in
the hardened condition. AISI 4340 steel properties offer good ductility
in the annealed condition, allowing it to be bent or formed. Fusion and
resistance welding is also possible with our 4340 alloy steel. ASTM 4340
material is often utilized where other alloy steels do not have the
hardenability to give the strength required. For highly stressed parts
it is excellent choice. AISI 4340 alloy steel can also be machined by
all customary methods.
Due to availability the ASTM 4340 grade steel is often substituted
with European based standards 817M40/EN24 and 1.6511/36CrNiMo4 or Japan
based SNCM439 steel. You have the detailed data of 4340 steel below.
1. AISI 4340 Steel Specification and Relevant Standards
|Standard||EN 10250||JIS G4103|
2. ASTM 4340 Steels And Equilvalents Chemical Composition
|JIS G4103||SNCM 439/SNCM8||0.36-0.43||0.60-0.90||0.030||0.030||0.15-0.35||1.60-2.00||0.60-1.00||0.15-0.30|
3. AISI Alloy 4140 Steel Mechanical Properties
(Heat Treated Condition )
|Tensile Strength MPa||Yield Strength
|Thermal expansion co-efficient (20°C/68°F, specimen oil hardened, 600°C (1110°F) temper||12.3 µm/m°C||6.83 µin/in°F|
|Thermal conductivity (typical steel)||44.5 W/mK||309 BTU in/hr.ft².°F|
4. Forging of 4340 Alloy Steel
the steel 4340 first, heat up to 1150°C – 1200°C maximum for forging,
hold until temperature is uniform throughout the section.
Do not forge
below 850 °C. 4340 has good forging characteristics but care must be
taken when cooling as the steel shows susceptibility to cracking.
Following forging operation the work piece should be cooled as slowly as
possible. And cooling in in sand or dry lime is recommended etc.
5. AISI 4340 Steel Grade Heat Treatment
pre-hardened steel stress relieving is achieved by heating steel 4340
to between 500 to 550°C. Heat to 600 °C – 650 °C, hold until temperature
is uniform throughout the section, soak for 1 hour per 25 mm section,
and cool in still air.
full anneal may be done at 844°C (1550 F) followed by controlled
(furnace) cooling at a rate not faster than 10°C (50 F) per hour down to
315°C (600 F). From 315°C 600 F it may be air cooled.
4340 alloy steel should be in the heat treated or normalized and heat
treated condition before tempering. The tempering temperature for
depends upon the strength level desired. For strength levels in the 260 –
280 ksi range temper at 232°C (450 F). For strength in the 125 – 200
ksi range temper at 510°C (950 F). And don’t temper the 4340 steels if
it is in the 220 – 260 ksi strength range as tempering can result in
degradation of impact resistance for this level of strength.
Tempering should be avoided if possible within the range 250 °C – 450 °C due to temper brittleness.
Flame or Induction Hardening
As mentioned above, pre-hardened and tempered 4340 steel bars or plates can be further surface hardened by either the flame or induction hardening
methods resulting in a case hardness in excess of Rc 50. AISI 4340
steel parts should be heated as quickly as possible to the austenitic
temperature range (830 °C – 860 °C) and required case depth followed by
an immediate oil or water quenching, depending upon hardness required,
workpiece size/shape and quenching arrangements.
quenching to hand warm, tempering at 150°C – 200°C will reduce stresses
in the case with minimal effect on its hardness.
All de-carburised surface material must first be removed to ensure best results.
and tempered 4340 alloy steel can also be nitrided, giving a surface
hardness of up to Rc 60. Heat to 500°C – 530°C and hold for sufficient
time (from 10 to 60 hours) to develop the depth of case. Nitriding
should be followed by slow cooling (no quench) reducing the problem of
distortion. The nitrided grade 4340 materials can therefore be machined
to near final size, leaving a small grinding allowance only. The tensile
strength of the 4340 steel material core is usually not affected since
the nitriding temperature range is generally below the original
tempering temperature employed.
Surface hardness achievable is 600 to 650HV.
is best done with the alloy steel 4340 in the annealed or normalized
and tempered condition. It can be readily machined by all conventional
methods such as sawing, turning, drilling etc. However in the high
strength conditions of 200 ksi or greater the machinability is only from
25% to 10% that of the alloy in the annealed condition.
of steel 4340 in the hardened and tempered condition (as normally
supplied), is not recommended and should be avoided if at all possible,
because of the danger of quench cracking, as the mechanical properties
will be altered within the weld heat affected zone.
must be carried out, pre-heat to 200 to 300°C and maintain this while
welding. Immediately after welding stress relieve at 550 to 650°C, prior
to hardening and tempering.
If welding in the hardened and
tempered condition is really necessary, then the work piece, immediately
on cooling to hand warm, should be if possible stress relieved at 15 °C
below the original tempering temperature.
8. Application of 4340 Steel
4340 steel is used in most industry sectors for applications requiring
higher tensile/yield strength than 4140 steel can provide.
Some typical applications such as:
Aircraft Landing Gear
Oil and Gas Drilling,
Warm and Cold Forming,
Transfer Systems, like power transmission gears and shafts.
engineering industries and structural use applications, such as: heavy
duty shafts, gears, axles, spindles, couplings, pins, chucks, molds etc.
VOLVO V70 DIESEL ESTATE (2010) D3  ES 5DR GEARTRONIC – MX10RJJ
First registered: 26/07/2010
Current mileage: 40950
all round electric windows, remote central locking, all leather interior, all round airbags, climate control, pas, abs, alloy wheels, metallic paint, cd, traction control, load space cover present, hand book present, cruise control, bluetoot
This used car is for sale at Fords of Winsford Car Supermarket in Cheshire, UK http://www.fow.co.uk/our-cars/view/volvo-v70-mx10rjj
ASTM A213 T22 Seamless Ferritic and Austenitic Alloy-Metal Boiler, Superheater, Warmth-Exchanger Tubes.
Grades made up of the letter H in their designation have requirements distinctive from these of identical grades not made up of the letter H.
These distinctive requirements provide greater creep-rupture power than commonly achievable in identical grades without having these distinctive requirements. ASTM A213 T22 tubes shall be made by the seamless approach and shall be either very hot concluded or cold concluded, as specified. Quality TP347HFG shall be cold concluded. Warmth procedure shall be finished independently and in addition to heating for very hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless metal tubes shall be furnished in the heat-taken care of condition. Alternatively, straight away soon after very hot forming, whilst the temperature of the tubes is not a lot less than the bare minimum option temperature, tubes may possibly be separately quenched in water or fast cooled by other usually means. Stress examination, hardness examination, flattening examination, and flaring examination shall be finished to just about every tube. Also, just about every tube shall be subjected to the nondestructive electric examination or hydrostatic examination.
ASTM A209 Through A213
Other conventional specifications incorporate the types of A209 seamless carbon-molybdenum alloy-metal boiler and superheater tubes A210 seamless medium-carbon metal boiler and superheater tubes and A213 seamless ferritic and austenitic metal boiler, superheater and heat-exchanger tubes.
Piping wall thicknesses array from 1/2 inch to five inches. A213 grades also have the letter H or M assigned, which improvements the composition and specifications for that series.
This summary is a short summary of the referenced conventional. It is informational only and not an formal portion of the conventional the comprehensive text of the conventional alone should be referred to for its use and application.
ASTM does not give any guarantee express or implied or make any illustration that the contents of this summary are accurate, finish or up to date.
Wall thickness is average wall or according to ASME SA530.
Notes for Bend Examination:
For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7. or a lot less shall be subjected to the bend examination as a substitute of the flattening examination.
Other pipe whose diameter equals or exceeds NPS 10 may possibly be specified the bend examination in location of the flattening examination subject matter to the acceptance of the purchaser.
The bend examination specimens shall be bent at place temperature via one hundred eighty without having cracking on the outdoors of the bent part.
Packed in wooden crates, wrapped in plastic, and suitably secured for sea-worthly shipping and delivery or as asked for.
Both of those ends of just about every crate will suggest the order no., heat no., dimensions, fat and bundles or as asked for.
Shipping and delivery:
Pipes are supplied in hexagonal bundles or spherical bundles tied with metal strip.
Excess weight of bundle – up to 5000 kg on ask for of client.
Just about every bundle is furnished with 3 tags.
We are manufacturer of ASTM A213 T22 alloy tube and supply high high quality ASTM A213 T22 alloy tube in both equally huge and smaller portions around the world and supply you the most effective rates in the marketplace.
We have a workforce of expert experts with years of knowledge in manufacturing. (www.sunnysteel.com)
Sunny Metal Company Ltd.
No. 273, Siping Highway, Shanghai, 200081, China