OEM Manufacturer AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Wholesale to Portland
AISI 4340 steel is a medium carbon, low alloy steel known for its toughness andstrength in relatively large sections. AISI 4340 is also one kind ofnickel chromium molybdenum steels. 4340 alloy steel is generallysupplied hardened and tempered in the tensile range of 930 – 1080 Mpa.Pre hardened and tempered 4340 steels can be further surface hardened by flame or induction hardening and by nitriding. The 4340 steel has goodshock and impact resistance as well as wear and abrasion resistanc...
We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for OEM Manufacturer AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Wholesale to Portland, We fully welcome customers from all over the world to establish stable and mutually beneficial business relationships, to have a bright future together.
is a medium carbon, low alloy steel known for its toughness and
strength in relatively large sections. AISI 4340 is also one kind of
nickel chromium molybdenum steels. 4340 alloy steel is generally
supplied hardened and tempered in the tensile range of 930 – 1080 Mpa.
Pre hardened and tempered 4340 steels can be further surface hardened by
flame or induction hardening and by nitriding. The 4340 steel has good
shock and impact resistance as well as wear and abrasion resistance in
the hardened condition. AISI 4340 steel properties offer good ductility
in the annealed condition, allowing it to be bent or formed. Fusion and
resistance welding is also possible with our 4340 alloy steel. ASTM 4340
material is often utilized where other alloy steels do not have the
hardenability to give the strength required. For highly stressed parts
it is excellent choice. AISI 4340 alloy steel can also be machined by
all customary methods.
Due to availability the ASTM 4340 grade steel is often substituted
with European based standards 817M40/EN24 and 1.6511/36CrNiMo4 or Japan
based SNCM439 steel. You have the detailed data of 4340 steel below.
1. AISI 4340 Steel Specification and Relevant Standards
|Standard||EN 10250||JIS G4103|
2. ASTM 4340 Steels And Equilvalents Chemical Composition
|JIS G4103||SNCM 439/SNCM8||0.36-0.43||0.60-0.90||0.030||0.030||0.15-0.35||1.60-2.00||0.60-1.00||0.15-0.30|
3. AISI Alloy 4140 Steel Mechanical Properties
(Heat Treated Condition )
|Tensile Strength MPa||Yield Strength
|Thermal expansion co-efficient (20°C/68°F, specimen oil hardened, 600°C (1110°F) temper||12.3 µm/m°C||6.83 µin/in°F|
|Thermal conductivity (typical steel)||44.5 W/mK||309 BTU in/hr.ft².°F|
4. Forging of 4340 Alloy Steel
the steel 4340 first, heat up to 1150°C – 1200°C maximum for forging,
hold until temperature is uniform throughout the section.
Do not forge
below 850 °C. 4340 has good forging characteristics but care must be
taken when cooling as the steel shows susceptibility to cracking.
Following forging operation the work piece should be cooled as slowly as
possible. And cooling in in sand or dry lime is recommended etc.
5. AISI 4340 Steel Grade Heat Treatment
pre-hardened steel stress relieving is achieved by heating steel 4340
to between 500 to 550°C. Heat to 600 °C – 650 °C, hold until temperature
is uniform throughout the section, soak for 1 hour per 25 mm section,
and cool in still air.
full anneal may be done at 844°C (1550 F) followed by controlled
(furnace) cooling at a rate not faster than 10°C (50 F) per hour down to
315°C (600 F). From 315°C 600 F it may be air cooled.
4340 alloy steel should be in the heat treated or normalized and heat
treated condition before tempering. The tempering temperature for
depends upon the strength level desired. For strength levels in the 260 –
280 ksi range temper at 232°C (450 F). For strength in the 125 – 200
ksi range temper at 510°C (950 F). And don’t temper the 4340 steels if
it is in the 220 – 260 ksi strength range as tempering can result in
degradation of impact resistance for this level of strength.
Tempering should be avoided if possible within the range 250 °C – 450 °C due to temper brittleness.
Flame or Induction Hardening
As mentioned above, pre-hardened and tempered 4340 steel bars or plates can be further surface hardened by either the flame or induction hardening
methods resulting in a case hardness in excess of Rc 50. AISI 4340
steel parts should be heated as quickly as possible to the austenitic
temperature range (830 °C – 860 °C) and required case depth followed by
an immediate oil or water quenching, depending upon hardness required,
workpiece size/shape and quenching arrangements.
quenching to hand warm, tempering at 150°C – 200°C will reduce stresses
in the case with minimal effect on its hardness.
All de-carburised surface material must first be removed to ensure best results.
and tempered 4340 alloy steel can also be nitrided, giving a surface
hardness of up to Rc 60. Heat to 500°C – 530°C and hold for sufficient
time (from 10 to 60 hours) to develop the depth of case. Nitriding
should be followed by slow cooling (no quench) reducing the problem of
distortion. The nitrided grade 4340 materials can therefore be machined
to near final size, leaving a small grinding allowance only. The tensile
strength of the 4340 steel material core is usually not affected since
the nitriding temperature range is generally below the original
tempering temperature employed.
Surface hardness achievable is 600 to 650HV.
is best done with the alloy steel 4340 in the annealed or normalized
and tempered condition. It can be readily machined by all conventional
methods such as sawing, turning, drilling etc. However in the high
strength conditions of 200 ksi or greater the machinability is only from
25% to 10% that of the alloy in the annealed condition.
of steel 4340 in the hardened and tempered condition (as normally
supplied), is not recommended and should be avoided if at all possible,
because of the danger of quench cracking, as the mechanical properties
will be altered within the weld heat affected zone.
must be carried out, pre-heat to 200 to 300°C and maintain this while
welding. Immediately after welding stress relieve at 550 to 650°C, prior
to hardening and tempering.
If welding in the hardened and
tempered condition is really necessary, then the work piece, immediately
on cooling to hand warm, should be if possible stress relieved at 15 °C
below the original tempering temperature.
8. Application of 4340 Steel
4340 steel is used in most industry sectors for applications requiring
higher tensile/yield strength than 4140 steel can provide.
Some typical applications such as:
Aircraft Landing Gear
Oil and Gas Drilling,
Warm and Cold Forming,
Transfer Systems, like power transmission gears and shafts.
engineering industries and structural use applications, such as: heavy
duty shafts, gears, axles, spindles, couplings, pins, chucks, molds etc.
powder machinery for plastic bag filling sealing packer machine, plastic film roll forming packing bag machine,Totally free Shipping missing excess weight espresso packing machine for normal want, Great Powder Filling Device Powder Packing Device,-100g Full computerized vertical packing machine, no cost for spare areas,Drugs packaging equipment, powder pouch packaging machinery, powder packing machine,300-500g powder bag filling and packing machine with auger filler,no cost shipment -200ml Ice pop/jelly/Liquid soft consume stick bag filling sealing and packaging machine,-100g Absolutely Automated Powder Packing Device with volumetric cup filler,3 facet seal or four facet seal,10-1000g baggging scale machine, computerized filling machine, automobile weigher,Washing powder / powder /floue filling maching,Single Tube Vertical Form/Fill/Seal Device,tea bag packing machine,packaging product,5-250g Totally free Shipping missing excess weight packing machine filling and sealing machine very good top quality with most effective selling price,Automated Vertical Solid Granules Powder Food stuff Filling Sealig packaging machine manufactorers Bag Volumetric Filling Device,-1kg Food stuff/cake/biscuit /bread/bakery/snack packing machine,manufacturing facility selling price,nowadays machine,semi automobile powder packing machine with auger filler,Properly advertising and realistic selling price andautomatic milk powder,sugar packing machine with one particular 12 months warranty,Full computerized health-related powder packing machine total computerized packing machine for powder very good top quality wtih most effective selling price,Full Automated Liquid Filling Device Totally free Shipping,100-200g espresso packing machine filling and sealing machine very good top quality with most effective selling price,100-500ml Automated juice sachet/bags/pouch packing machine,100-1000ml Manufacturing unit selling price juice bag packing machine, for oversea agency,paint machine,stainless steel vertical packaging machine, new product, much better qualityBest advertising high top quality granule plastic bag packing machine for powder goods,500-100g millet, coix seed, rice granule packing machine/quantitative packaging machine,Automated Vertical Form Fill Seal Tiny Sachet Power Granules Packaging Device for espresso/sweet/health-related products/plant seeds,two hundred-500ml Automated liquid bag packaging machine packaging of milk soy sauce bag packing machine bag milk packaging machine,mini pack filling machine,little scale spices powder packing machine for little business enterprise,Manual Edible Oil Filling Device,Edible Oil Packing Device for Olive, Vegetable ,Cooking Oil,computerized film impulse sealer Warmth plastic bag Sealer, sealing machine, acceptable for heat packing,Sugar, espresso packaging machine,big volume skimmed powder packing machine for international nations in realistic quotation,mineral water plastic bag filling and sealing little dimension semi packing machine with ate printing,fifty-100ml liquid bag packing machine for ketchup/shampoo/sauce,sachet water filling machine,-250ml Ice pop/jelly/Liquid soft consume stick bag filling sealing and packaging machine,Totally free Shipping espresso packing machine food packing bag packing machines,3-30g soy / sesame paste,420K Automated vertical big particle packing machine,no cost shipment 100-1000ml Manufacturing unit selling price juice bag packing machine, for oversea agency,paint machine,Quick noodles Substances computerized packaging equipment,soil filling machine with measuring cups for bottle/bag/pouch, area payment,Tea / milk / milk packaging sides sealed screw
5hi rolling mill, single direction, 5 passes,