OEM China High quality AISI 1053 Carbon Steel (UNS G10530) Factory in Belize

OEM China High quality
 AISI 1053 Carbon Steel (UNS G10530) Factory in Belize

Short Description:

Chemical Composition The chemical composition of AISI 1053 carbon steel is outlined in the following table. Element Content (%) Iron, Fe 98.36-98.82 Manganese, Mn 0.7-1.0 Carbon, C 0.48-0.55 Sulfur, S 0.05 Phosphorous, P 0.04 Physical Properties The physical properties of AISI 1053 carbon steel are tabulated below. Properties Metric Imperial Density 7.7-8.03 g/cm3 0.278-0.290 l...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of
    OEM China High quality AISI 1053 Carbon Steel (UNS G10530) Factory in Belize, we have built a reliable reputation among many customers. Quality&customer first are always our constant pursuit. We spare no efforts to make better products. Look forward to long-term cooperation and mutual benefits!


    Chemical Composition

    The chemical composition of AISI 1053 carbon steel is outlined in the following table.

    Element Content (%)
    Iron, Fe 98.36-98.82
    Manganese, Mn 0.7-1.0
    Carbon, C 0.48-0.55
    Sulfur, S 0.05
    Phosphorous, P 0.04

    Physical Properties

    The physical properties of AISI 1053 carbon steel are tabulated below.

    Properties Metric Imperial
    Density 7.7-8.03 g/cm3 0.278-0.290 lb/in3

    Mechanical Properties

    The following table shows mechanical properties of AISI 1053 carbon steel.

    Properties Metric Imperial
    Elastic modulus 190-210 GPa 29700-30458 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30

  • Previous:
  • Next:




  • View this video on the Forging process! Open-die forging can produce forgings from a few pounds up to more than 150 tons. Called open-die because the metal is not confined laterally by impression dies during forging, this process progressively works the starting stock into the desired shape, most commonly between flat-faced dies. In practice, open-die forging comprises many process variations, permitting an extremely broad range of shapes and sizes to be produced. In fact, when design criteria dictate optimum structural integrity for a huge metal component, the sheer size capability of open-die forging makes it the clear process choice over non-forging alternatives. At the high end of the size range, open-die forgings are limited only by the size of the starting stock, namely, the largest ingot that can be cast. Seamless Rolled Ring Forging
    Seamless rolled ring forging is typically performed by punching a hole in a thick, round piece of metal (creating a donut shape), and then rolling and squeezing (or in some cases, pounding) the donut into a thin ring. Ring diameters can be anywhere from a few inches to 30 feet

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key