Manufacturing Companies for AISI304| SUS304| EN1.4948 Factory for London

Manufacturing Companies for
 AISI304| SUS304| EN1.4948 Factory for London

Short Description:

Chemical Composition of Stainless Steel 304 Table 1. Chemical composition for 304 stainless steel alloys % 304 304L 304H C 0.0 – 0.07 0.0 – 0.03 0.04 – 0.08 Mn 0.0 – 2.0 0.0 – 2.00 0.0 – 2.0 Si 0.0 – 1.00 0.0 – 1.00 0.0 – 1.0 P 0.0 – 0.05 0.0 – 0.05 0.0 – 0.04 S 0.0 – 0.03 0.0 – 0.02 0.0 – 0.02 Cr 17.50 – 19.50 17.50 – 19.50 ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    owing to good service, a variety of high quality products, competitive prices and efficient delivery, we enjoy a good reputation among our customers. We are an energetic company with wide market for Manufacturing Companies for AISI304| SUS304| EN1.4948 Factory for London, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!


    Chemical Composition of Stainless Steel 304

    Table 1. Chemical composition for 304 stainless steel alloys

    %

    304

    304L

    304H

    C

    0.0 – 0.07

    0.0 – 0.03

    0.04 – 0.08

    Mn

    0.0 – 2.0

    0.0 – 2.00

    0.0 – 2.0

    Si

    0.0 – 1.00

    0.0 – 1.00

    0.0 – 1.0

    P

    0.0 – 0.05

    0.0 – 0.05

    0.0 – 0.04

    S

    0.0 – 0.03

    0.0 – 0.02

    0.0 – 0.02

    Cr

    17.50 – 19.50

    17.50 – 19.50

    17.00 – 19.00

    Ni

    8.00 – 10.50

    8.00 – 10.50

    8.00 – 11.00

    Fe

    Balance

    Balance

    Balance

    N

    0.0-0.11

    0.0-0.11

    0.0 – 0.10

    Properties of Stainless Steel 304

    Mechanical Properties of Stainless Steel 304

    Table 2a. Mechanical properties for 304 stainless steel alloys – sheet up to 8 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    540 – 750

    520 – 700

    -

    Proof Stress (MPa)

    230 Min

    220 Min

    -

    Elongation A50 mm

    45 Min %

    45 Min %

    -


    Table 2b. Mechanical properties for 304 stainless steel alloys – plate from 8 – 75 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    520 – 720

    500 – 700

    -

    Proof Stress (MPa)

    210 Min

    200 Min

    -

    Elongation A5

    45 Min %

    45 Min %

    -


    Table 2c. Mechanical properties for 304 stainless steel alloys – bar and section up to 160 mm diameter / thickness

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    500 – 700

    500 – 700

    500 – 700

    Proof Stress (MPa)

    190

    175 Min

    185 Min

    Elongation A50 mm

    45 Min %

    45 Min %

    40 Min %

    Hardness Brinell

    215 Max HB

    215 Max HB

    -

    Physical Properties of Stainless Steel 304

    Table 3. Physical properties for 304 stainless steel alloys

    Property

    Value

    Density

    8.00 g/cm3

    Melting Point

    1450 °C

    Modulus of Elasticity

    193 GPa

    Electrical Resistivity

    0.072 x 10-6 Ω.m

    Thermal Conductivity

    16.2 W/m.K

    Thermal Expansion

    17.2 x 10-6 /K

    Alloy Designations

    Stainless steel 304 also corresponds to the following standard designations and specifications:

    Euronorm

    UNS

    BS

    En

    Grade

    1.4301

    S30400

    304S15

    304S16

    304S31

    58E

    304

    1.4306

    S30403

    304S11

    -

    304L

    1.4307

    -

    304S11

    -

    304L

    1.4311

    -

    304S11

    -

    304L

    1.4948

    S30409

    304S51

    -

    304H

    Corrosion Resistance of Stainless Steel 304

    Stainless steel 304
    has excellent corrosion resistance in a wide variety of environments
    and when in contact with different corrosive media. Pitting and crevice
    corrosion can occur in environments containing chlorides. Stress
    corrosion cracking can occur at temperatures over 60°C.

    Heat Resistance of Stainless Steel 304

    Stainless steel 304 has
    good resistance to oxidation in intermittent service up to 870°C and in
    continuous service to 925°C. However, continuous use at 425-860°C is
    not recommended if corrosion resistance in water is required. In this
    instance 304L is recommended due to its resistance to carbide
    precipitation.

    Where high strength is required at temperatures above 500°C and up to
    800°C, grade 304H is recommended. This material will retain aqueous
    corrosion resistance.

    Fabrication of Stainless Steel 304

    Fabrication of all stainless steels should
    be done only with tools dedicated to stainless steel materials. Tooling
    and work surfaces must be thoroughly cleaned before use. These
    precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.

    Cold Working of Stainless Steel 304

    Stainless steel 304 readily
    work hardens. Fabrication methods involving cold working may require an
    intermediate annealing stage to alleviate work hardening and avoid
    tearing or cracking. At the completion of fabrication a full annealing
    operation should be employed to reduce internal stresses and optimise
    corrosion resistance.

    Hot Working of Stainless Steel 304

    Fabrication methods, like forging, that involve hot working should
    occur after uniform heating to 1149-1260°C. The fabricated components
    should then be rapidly cooled to ensure maximum corrosion resistance.

    Heat Treatment of Stainless Steel 304

    Stainless steel 304 cannot be hardened by heat treatment.

    Solution treatment or annealing can be done by rapid cooling after heating to 1010-1120°C.

    Machinability

    Stainless steel 304 has good machinability. Machining can be enhanced by using the following rules:

    • Cutting edges must be kept sharp. Dull edges cause excess work hardening.

    • Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.

    • Chip breakers should be employed to assist in ensuring swarf remains clear of the work

    • Low thermal conductivity of austenitic alloys results in heat
      concentrating at the cutting edges. This means coolants and lubricants
      are necessary and must be used in large quantities.

    Welding of Stainless Steel 304

    Fusion welding performance for Stainless steel 304 is excellent both with and without fillers. Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel.
    For 304L the recommended filler is 308L. Heavy welded sections may
    require post-weld annealing. This step is not required for 304L. Grade
    321 may be used if post-weld heat treatment is not possible.

    Applications of Stainless Steel 304

    Stainless steel 304 is typically used in:

    • Sinks and splashbacks

    • Saucepans

    • Cutlery and flatware

    • Architectural panelling

    • Sanitaryware and troughs

    • Tubing

    • Brewery, dairy, food and pharmaceutical production equipment

    • Springs, nuts, bolts and screws

  • Previous:
  • Next:



  • Save up to 33% by buying online! https://www.fiberfix.com

    #FiberFix is 100 times stronger than Duct Tape and softer than nothing. Limited time only, buy one of our Manly Man Fix Kit packages and get a huge discount!!

    Special recognition goes to the FiberFix founding team. It was an honor to work with them and to have their trust and collaboration to bring this film advertisement to reality.

    The FiberFix Founders are:
    CEO: Eric Child
    COO: Reed Quinn
    Co-founder: Spencer Quinn
    Co-founder: Chris Quinn
    Co-founder: Derek Rowley

    Created by the Harmon Brothers agency.

    http://www.harmonbrothers.com

    CAST, WRITERS, CREW, CONSTRUCTION AND ENGINEERING

    CAST:
    Actor and Manly Man: Jason Gray
    Sexy Plumber: Jeff Blake
    Tough Woman: Alicia Washington
    Tough Woman: Marisol Peterson
    Tough Woman: Stacylyn Bennett
    Hand double: Jonah Rindlisbacher

    WRITERS
    Lead Writer: Matt Meese
    Contributing Writer: Mallory Everton
    Contributing Writer: Dave Vance
    Concepting: Benton Crane, Daniel Harmon, Jeffrey Harmon, Jordan Booth

    CREW:
    Executive Producers: Theron Harmon, Jeffrey Harmon
    Director and Creative Director: Daniel Harmon
    Co-Director: Matt Meese
    Assistant Director: James Dayton
    Producer: James Dayton, Jamestown Films
    Co-Producers: Patrick Newman, Benton Crane
    Director of Photography: Tyler Stevens
    1st AC: Max Carter
    Crane Operator: Bobby Fisk
    B Cam Operator: Tel Stewart
    B Cam 1st AC: Sam Wilson
    C and D Cam Operator: Shane Rickard
    C and D Cam 1st AC: Sasha Blume
    Drone Operator: Patrick Newman
    Drone Camera: James Dayton
    GoPro Tech: Braden Storrs
    DIT and Scripty: Kaitlin Snow Seamons
    Gaffer: Phil Shepherd
    Best Boy: Brian Shepherd
    Sound Mixer: David Adamic
    Art Director and Set Designer: Dillon Ellefson
    Set Decorator: Cody Fairbanks
    Assistant Set Decorator: Skyler Almond
    Propmaster: Wray Featherstone
    Construction Foreman: Layne Robinson
    Scenic Artist: Tyler Astrope
    Lead Editor: Kaitlin Snow Seamons
    Special Effects / Stunts Leads: Ryan Roundy, Mike Roundy, Roundy Special FX
    FX Technicians: Chuck Roundy, Chris Romrell
    Production Assistants: Jake Burns, Mandy Harmon,
    EMT and Safety: Brian Tanner
    Hair and Make-up: Vanae Morris
    Costuming: Anna K Findlay
    Lead Editor: Kaitlin Snow Seamons
    Editing Advisors: Jeffrey Harmon and Matt Meese
    Visual Effects Supervisor: Tyler Stevens
    Colorist: Tyler Stevens
    Sound Design: Jake Edvalson
    Pick-up Product Shoot: Shane Rickard, Jonny Vance, Tyler Stevens

    ENGINEERING AND CONSTRUCTION – CARS AND ROLL CAGES
    Engineering and Testing Lead: Benton Crane
    Roll Cage Design and Construction Lead: Deveren Farley
    Roll Cage Construction: Kendall Nielson, Madsen Stuart, McKenzie Nellesen. Company: Interior Iron
    Additional Testing: Jordan Booth, Brett Davis, Tanner Bean, Royal Rose
    Electrical Engineering / RC Design: Tanner Bean
    Car Body Work and Painting: Dan Stevens crew. Company: AutoApe
    Vehicle Transport: Brett Davis
    Wrecker and Removal: Dan Stevens
    Team Leads FiberFix and Duct Tape Wrapping Team: Mandy Harmon and Jonah Rindlisbacher

    BEHIND THE SCENES
    BTS Camera Operators: Jonah Rindlisbacher, Brett Stubbs, Christian Sanchez
    BTS Lead Editor: Jonah Rindlisbacher
    BTS Writing and Advisement: Kaitlin Snow Seamons, Tyler Stevens, Jeffrey Harmon, Daniel Harmon, Theron Harmon, Benton Crane
    Interviews in order of appearance: Dan Stevens, Dillon Ellefson, Deveren Farley, Eric Child, Dave Vance, Daniel Harmon, Benton Crane, Matt Meese, Jason Gray, Jonah Rindlisbacher, Tyler Stevens

    OTHER PRODUCTION
    Location Scouting: Benton Crane, Ryan Roundy, Jamestown Films, Mandy Harmon, Patrick Newman, James Dayton.
    Casting: Daniel Harmon, Matt Meese, Theron Harmon
    Casting Agencies: Talent Management Group and Urban Talent Management
    Location: Ronald Spratling, Jr. and Ronald Spratling, III
    FiberFix Brand Manager: Tyson Anderson
    Graphic Design, Website Design, Packaging Design: Brett Crockett
    Web Development: Brett Stubbs
    Distribution and Optimization Launch: Brett Stubbs, Abe Niederhauser, Jonny Vance, Theron Harmon, Benton Crane, Jeff Harmon, Brett Crockett

    Huge thanks to everyone! This has been one for the books!

    Try FiberFix today at http://www.fiberfix.com

    Check out the Behind The Scenes video. Yes, this was a real test!



    50Pcs Titanium Coated HSS High Speed Steel Drill Bit Tool 1/
    รายละเอียด : http://best.chickensforsale.us/j4Ohv

    50Pcs Titanium Coated HSS High Speed Steel Drill Bit Tool 1/1.5/2/2.5/3mm
    คุณผู้หญิงกำลังรายละเอียดสินค้า 50Pcs Titanium Coated HSS High Speed Steel Drill Bit Tool 1/1.5/2/2.5/3mm เพื่อช่วยให้ชีวิตสะดวกขึ้น อยูใช่หรือไม่ ถ้าใช่คุณมาถูกที่แล้ว เรามีคำแนะนำดีๆ ที่ท่านต้องการ เรามีแหล่งซื้อ สินค้า 50Pcs Titanium Coated HSS High Speed Steel Drill Bit Tool 1/1.5/2/2.5/3mm ราคาที่สัมผัสได้ แนะนำให้คุณผู้หญิง 50Pcs Titanium Coated HSS High Speed Steel Drill Bit Tool 1/1.5/2/2.5/3mm
    Design: Straight ShankMaterial: HSS Titanium CoatedStraight shank design is more suitable for many electricdrills and drilling machines (here is not included)Sharp and twisted flute will make the drilling be moreeasy and effortlessSuitable for wood, aluminum, plastic or othermaterials BU067HLAA1MVHAANTH-3568094 เครื่องใช้ ของตกแต่งบ้าน อุปกรณ์ปรับปรุงบ้าน …

    ค้นหายอดนิยม : 50Pcs, Titanium, Coated, HSS, High, Speed, Steel, Drill, Bit, Tool, 11.522.53mm, 50Pcs Titanium Coated HSS High Speed Steel Drill Bit Tool 1/1.5/2/2.5/3mm

    50Pcs #Titanium #Coated #HSS #High #Speed #Steel #Drill #Bit #Tool #11.522.53mm #50Pcs Titanium Coated HSS High Speed Steel Drill Bit Tool 1/1.5/2/2.5/3mm

    50Pcs Titanium Coated HSS High Speed Steel Drill Bit Tool 1/1.5/2/2.5/3mm pantip ราคา true review ดีไหม รีวิว สเปค

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree