Manufacturer for AISI304| SUS304| EN1.4948 Manufacturer in Brunei

Manufacturer for
 AISI304| SUS304| EN1.4948 Manufacturer in Brunei

Short Description:

Chemical Composition of Stainless Steel 304 Table 1. Chemical composition for 304 stainless steel alloys % 304 304L 304H C 0.0 – 0.07 0.0 – 0.03 0.04 – 0.08 Mn 0.0 – 2.0 0.0 – 2.00 0.0 – 2.0 Si 0.0 – 1.00 0.0 – 1.00 0.0 – 1.0 P 0.0 – 0.05 0.0 – 0.05 0.0 – 0.04 S 0.0 – 0.03 0.0 – 0.02 0.0 – 0.02 Cr 17.50 – 19.50 17.50 – 19.50 ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for Manufacturer for AISI304| SUS304| EN1.4948 Manufacturer in Brunei, If you are interested in our products, please feel free to send us your inquiry. We sincerely hope to establish win-win business relationships with you.


    Chemical Composition of Stainless Steel 304

    Table 1. Chemical composition for 304 stainless steel alloys

    %

    304

    304L

    304H

    C

    0.0 – 0.07

    0.0 – 0.03

    0.04 – 0.08

    Mn

    0.0 – 2.0

    0.0 – 2.00

    0.0 – 2.0

    Si

    0.0 – 1.00

    0.0 – 1.00

    0.0 – 1.0

    P

    0.0 – 0.05

    0.0 – 0.05

    0.0 – 0.04

    S

    0.0 – 0.03

    0.0 – 0.02

    0.0 – 0.02

    Cr

    17.50 – 19.50

    17.50 – 19.50

    17.00 – 19.00

    Ni

    8.00 – 10.50

    8.00 – 10.50

    8.00 – 11.00

    Fe

    Balance

    Balance

    Balance

    N

    0.0-0.11

    0.0-0.11

    0.0 – 0.10

    Properties of Stainless Steel 304

    Mechanical Properties of Stainless Steel 304

    Table 2a. Mechanical properties for 304 stainless steel alloys – sheet up to 8 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    540 – 750

    520 – 700

    -

    Proof Stress (MPa)

    230 Min

    220 Min

    -

    Elongation A50 mm

    45 Min %

    45 Min %

    -


    Table 2b. Mechanical properties for 304 stainless steel alloys – plate from 8 – 75 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    520 – 720

    500 – 700

    -

    Proof Stress (MPa)

    210 Min

    200 Min

    -

    Elongation A5

    45 Min %

    45 Min %

    -


    Table 2c. Mechanical properties for 304 stainless steel alloys – bar and section up to 160 mm diameter / thickness

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    500 – 700

    500 – 700

    500 – 700

    Proof Stress (MPa)

    190

    175 Min

    185 Min

    Elongation A50 mm

    45 Min %

    45 Min %

    40 Min %

    Hardness Brinell

    215 Max HB

    215 Max HB

    -

    Physical Properties of Stainless Steel 304

    Table 3. Physical properties for 304 stainless steel alloys

    Property

    Value

    Density

    8.00 g/cm3

    Melting Point

    1450 °C

    Modulus of Elasticity

    193 GPa

    Electrical Resistivity

    0.072 x 10-6 Ω.m

    Thermal Conductivity

    16.2 W/m.K

    Thermal Expansion

    17.2 x 10-6 /K

    Alloy Designations

    Stainless steel 304 also corresponds to the following standard designations and specifications:

    Euronorm

    UNS

    BS

    En

    Grade

    1.4301

    S30400

    304S15

    304S16

    304S31

    58E

    304

    1.4306

    S30403

    304S11

    -

    304L

    1.4307

    -

    304S11

    -

    304L

    1.4311

    -

    304S11

    -

    304L

    1.4948

    S30409

    304S51

    -

    304H

    Corrosion Resistance of Stainless Steel 304

    Stainless steel 304
    has excellent corrosion resistance in a wide variety of environments
    and when in contact with different corrosive media. Pitting and crevice
    corrosion can occur in environments containing chlorides. Stress
    corrosion cracking can occur at temperatures over 60°C.

    Heat Resistance of Stainless Steel 304

    Stainless steel 304 has
    good resistance to oxidation in intermittent service up to 870°C and in
    continuous service to 925°C. However, continuous use at 425-860°C is
    not recommended if corrosion resistance in water is required. In this
    instance 304L is recommended due to its resistance to carbide
    precipitation.

    Where high strength is required at temperatures above 500°C and up to
    800°C, grade 304H is recommended. This material will retain aqueous
    corrosion resistance.

    Fabrication of Stainless Steel 304

    Fabrication of all stainless steels should
    be done only with tools dedicated to stainless steel materials. Tooling
    and work surfaces must be thoroughly cleaned before use. These
    precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.

    Cold Working of Stainless Steel 304

    Stainless steel 304 readily
    work hardens. Fabrication methods involving cold working may require an
    intermediate annealing stage to alleviate work hardening and avoid
    tearing or cracking. At the completion of fabrication a full annealing
    operation should be employed to reduce internal stresses and optimise
    corrosion resistance.

    Hot Working of Stainless Steel 304

    Fabrication methods, like forging, that involve hot working should
    occur after uniform heating to 1149-1260°C. The fabricated components
    should then be rapidly cooled to ensure maximum corrosion resistance.

    Heat Treatment of Stainless Steel 304

    Stainless steel 304 cannot be hardened by heat treatment.

    Solution treatment or annealing can be done by rapid cooling after heating to 1010-1120°C.

    Machinability

    Stainless steel 304 has good machinability. Machining can be enhanced by using the following rules:

    • Cutting edges must be kept sharp. Dull edges cause excess work hardening.

    • Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.

    • Chip breakers should be employed to assist in ensuring swarf remains clear of the work

    • Low thermal conductivity of austenitic alloys results in heat
      concentrating at the cutting edges. This means coolants and lubricants
      are necessary and must be used in large quantities.

    Welding of Stainless Steel 304

    Fusion welding performance for Stainless steel 304 is excellent both with and without fillers. Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel.
    For 304L the recommended filler is 308L. Heavy welded sections may
    require post-weld annealing. This step is not required for 304L. Grade
    321 may be used if post-weld heat treatment is not possible.

    Applications of Stainless Steel 304

    Stainless steel 304 is typically used in:

    • Sinks and splashbacks

    • Saucepans

    • Cutlery and flatware

    • Architectural panelling

    • Sanitaryware and troughs

    • Tubing

    • Brewery, dairy, food and pharmaceutical production equipment

    • Springs, nuts, bolts and screws

  • Previous:
  • Next:



  • Forged Block & Bar manufacturer

    working material grade
    M.S,A-105,LF2,EN-8,EN-9,
    EN-19,EN-40B, EN-36,SAE 8620,EN-24,
    H11,H13,DB-6,
    F-11,F-12,F-91,F6NM
    410,420,422,304,316,321,347,310,F-51,F-60

    Our range of capacity are from 1000 kgs to 8000 kgs in single piece.

    Forged block & bar of Minimum 150 mm to 700 mm, x 3 to 7 meter Long

    Minimum order Qty truck load 10Mt

    If raw material supply by customer then we taking job work, as per required size in 1 nos. qty

    We request you to email us your enquiry

    Regards,
    Mr.Tushar Khoyani
    Managing Partner{MKT]
    Cell: 094269 63028
    ___ 07383240427__________________
    Pollen Forge
    Plot No: 158, Phase: II
    Road No: E, Aji Vasahat GIDC,
    Rajkot – 360 003, Gujarat – India
    Tel: +91 281 2925295
    Fax: +91 281 2387120
    Email: info@pollenforge.com
    pollen_forge@yahoo.com
    URL: http://www.pollenforge.com/

    http://www.indiamart.com/pollen-forge/

    http://www.pollenforge.co.in/

    ___________________________________
    Weekly Off: Wednesday



    Are you annoyed and upset that iPhone 3GS owners are the only ones able to use the battery percentage gauge on there iPhones and feeling left out? Well I am here to help you 2G and 3G users to get the same perks iPhone 3GS users get. In this review I will be teaching you how to use SBSettings from BigBoss and how to enable this feature left out for current iPhone users.

    This requires to be on a jailbroken iPhone, if you are not sure what that means do not worry I will be making a review soon on how to jailbreak your iphone!

    Please Subscribe and help by giving me feedback, I hope to keep making more videos so e-mail me or leave comments in the channel I will definitely read them and keep improving my reviews, also suggest what sorts of things you want to see.

    Thank you very much.

    samsung/ samsung tablet/nokia/nokia tablet/nokia lumia/nokia notbook/apple/apple i phone/ apple i pad/sony/sony exprea/
    micromax/htcmobile/LG phone/karobn phone/black berry/lava phone/lenovo/motorola phone/
    iball mobile/intex mobiles/spice mobiles/videocon mobile/ lemon mobiles/ zen mobiles/
    maxx mobiles/ fly mobiles/ GFive mobiles/ google phones/ dell/ pansaonic/ nokia lumia 2520/ nokia asha 502 dual sim/
    alcatel one touch pop c7/ nokia lumia 1520/ hp salte 7extreme/
    samsung galaxy note 10.1/ samsung galaxy star pro S7262/ samsung galaxy trend2 duos s7572/
    samsung ativs neo/samsung galaxy note3/
    samsung galaxy trend s7392/samsung chat s3330/ samsung chat s3332/
    samsung E1500/samsung gravity QT289/samsung galaxy s4 mini dous 19192/ samsung galaxy tba 8.0 T3100/ samsung galaxy Trend3 G3502/
    samsung galaxy round/samsung fame light s6790/samsung galaxy pro s7260/nokia lumia 1020 /
    nokia lumia 625/nokia lumia 925/nokia asha 501/nokia asha 210 dual sim/ nokia asha 501 dual sim/
    nokia 301 dual sim/ nokia asha 210/nokia lumia 520/ nokia lumia 720/nokia asha 310/ nokia 105/nokia lumia 2520/ nokia lumia 1520/ nokia asha 500 dual sim/ nokia asha 502 dual sim/sony Xperia C/ sonx Xperia Z1/
    sony xperiaM/ sony xperia z ultra/sony xperia l/ sony xperia sp c5302/sony xpreia tabletz/ sony xperia tabletz lite/sony xpreia Z/ Soney Xpreia Tablet S3G/

    sony Xperia ZL/ Sony Xperia E/apple Ipad 4 Wi-Fi/ apple Ipad Mini Wi-Fi/apple I pad3/
    Apple IPad 3 Wi Fi/apple IPad3 WiFi 4G/ Apple IPad Mini/
    apple IPhone 4S/ Apple IPhone 4S 32GB/apple IPhone 4S 64GB/ Apple IPad 2 WiFi with 3G/LG G2/LGLG-600/LG KG220/ LG T585/LG A390/ LG Optimus G pro/
    LG Optimus Zone VS410/ LG Optimus L4 Dual E445/LG Optimus Vu II GSM/ LG Optimus F5
    LG Optimus F7/ LG My Touch E739/LG Optimus L9 II/ LG G Pad 8.3/ LG Vu3/ LG G Pro Lite Dual/Black berry Z30/ Blackberry 9720/blackberry Q5/ Blackberry Q10/
    balckberry Pearl Flip 8230/ blackberry Z10/blackberry Curve Touch CDMA/ Blackberry Curve 9220/
    Blackberry Curve 9320/ balckberyy Bold 9790/
    Blackberry P9981 Porsche/ Blackberry Curve 9380/ Lenovo Miix10/ Lenovo A600e/Lenovo A516/ lENOVO a369i/lenovo A850/ Lenovo A1000/ Lenovo A3000/
    Lenovo S6000/LENOVO p780/ lENOVO a706 SMART phone/ lenovo A820/ Lenovo A830/lenovo S5000/ LENOVO viBEx/LENOVO mIIX2/ lenovoS920/MOTOROLA motoyuva w156/
    mOTOROLA motoyuva w160/motorola RAZR D3/ Motorola RIZR Z8/ motorola RAZR D1/ motorola DROID RAZR /mottorola electrify M/ Motorola RAZRI/ mOTOROLA rAZRhd/
    motorola Motosmart Me/motoroal Droid RazrM/ motorola Photon Q4G Lite/motorola MotoX/ Motorola Droid Mini/ motorola Droid Maxx/ motorola Dirod ultra/

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car