Manufactur standard EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory for Mumbai
EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...
Our team through professional training. Skilled professional knowledge, strong sense of service, to meet the service needs of customers for Manufactur standard EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory for Mumbai, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.
is an important alloy engineering steel grade as per BS EN
10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
resistance to overheating, but the white sensitivity of 34CrNiM06 is
high. It also has the temper brittleness, so the weldability of
34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
temperature preheating before welding in order to eliminate the stress
after welding processing.
1.EN Steel 34CrNiMo6 Supply Range
Round Steel Bar Sizes: diameter 80mm – 1200mm
Other steel shape and sizes available according to your requirements.
Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.
2.EN 34CrNiMo6 Steel Standards And Equivalents
|BS EN 10083 -3: 2006||34CrNiMo6 / 1.6582||: 2004||4337|
|BS EN 10250 – 3: 2000|
3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties
|BS EN 10083 – 3:2006||34CrNiMo6
|0.30-0.38||0.5-0.8||0.40 max||0.025 max||0.035 max||1.3-1.7||0.15-0.30||1.3-1.7|
|BS EN 10250-3:2000||C||Mn||Si||P||S||Cr||Mo||Ni|
|0.30-0.38||0.5-0.8||0.40 max||0.035 max||0.035 max||1.3-1.7||0.15-0.30||1.3-1.7|
|ASTM A29: 2004||4337||C||Mn||Si||P||S||Cr||Mo||Ni|
|0.30-0.40||0.6-0.8||0.20-0.35||0.035 max||0.040 max||0.70-0.90||0.20-0.30||1.65-2.00|
4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel
|Properties||< 16||>16 – 40||>40 – 100||>100 – 160||>160 – 250|
|Thickness t [mm]||< 8||8<t<20||20<t<60||60<t<100||100<t<160|
|Yield strength Re [N/mm²]||min. 1000||min. 900||min. 800||min. 700||min. 600|
|Tensile strength Rm [N/mm2]||1200 – 1400||1100 – 1300||1000 – 1200||900 – 1100||800 – 950|
|Elongation A [%]||min. 9||min. 10||min. 11||min. 12||min. 13|
|Reduction of area Z [%]||min. 40||min. 45||min. 50||min. 55||min. 55|
|Toughness CVN [J]||min. 35||min. 45||min. 45||min. 45||min. 45|
5.Heat Treatment of 34CrNiMo6 Engineering Steel
Quenched and Tempered (Q+T) of 34CrNiMo6 Steel
Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;
Soak at this hardening temperature quench in oil;
Temper as soon as 34CrNiMo6 steels reach room temperature.
Heat uniformly to the suitable temperature;
Withdraw from the furnace and cool in the air.
The usual tempering temperature is 600°C which depending on the actual requirements.
6.Forging of DIN 34CrNiMo6 / 1.6582 Steel
Hot forming temperature: 1100-900oC.
7.Machinability of Steel 34CrNiMo6
is best done with this 1.6582 alloy steel in the annealed or normalized
and tempered condition. It can be machined by all conventional methods.
alloy materials can be fusion or resistance welded. Preheat and post
heat weld procedures should be followed when welding this alloy by
34CrNiMo6 steel is used to make tools which demands good plasticity and
high strength. It is usually selected to make the big size and important
parts, such as heavy machinery axle,turbine shaft blade, high load of
transmission parts, fasteners, crank shafts, gears, as well as heavily
loaded parts for motor construction etc.
Otai Steel is reliable to
supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
Please tell us your detailed requirements and have the best offer soon.
alloy steel grades chart
steel specifications stockholders
alloy steel grades
alloy steel grades pdf
tool steel specifications
alloy steel grades and properties
alloy steel grades india
steel grades specifications
alloy steel grades explained
alloy steel grade 8
If you are interested or for more info please visit: http://amzn.to/1Sr6fIO
SUPERIOR BUNDLE: The X-Chef French Press for Coffee, Espresso and Tea Maker 1 Liter (about 8 small coffee cups or 4 coffee mugs).
HELPS YOU TO: DELIGHT YOUR SENSES starting the morning with the smell of essential oils from coffee beans and tea leaves; With the 4 screen system of the French Press Coffee Machine you will OBTAIN a CREAMY, FOAMY, VELVETY and PURE coffee and tea. This is the best Coffee Maker Machine for your delicate mornings.
VARIETY OF USES: The French Press can be used as a Coffee or Tea Press Pot and is the best way to prepare coffee, tea, iced tea, hot chocolate, fruit infusions, almond milk, cashew milk, plant tinctures, lemonades, rinse quinoa & More; SAVE TIME: This is the best choice for busy people! You will obtain an appetizing cup of coffee or tea in a few moments having only coarse coffee ground or tea leaves and water.
PREMIUM QUALITY, NOTHING LESS: The strong carafe is constructed from a heat resistant and durable glass to be present at all the special moments with those you love; The materials (glass and stainless steel) are completely taste-free so nothing comes between your ground coffee beans.
PROTECT YOUR INVESTMENT: Choosing the X-Chef French Press Coffee Maker means protection for your investment ! Because WE CARE and we want you to be happy. Besides, if you prefer a completely unique stainless steel designed french press, just search ASIN:B012FRA8UC, WE STRONGLY BELIEVE IT WILL ROCK YOUR COFFEE TIME, TOO.