Hot Selling for AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Manufacturer in Jordan

Hot Selling for
 AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Manufacturer in Jordan

Short Description:

AISI 8620 Steel is a low alloy nickel, chromium, molybdenum case hardening steel,generally supplied in the as rolled condition with a maximum hardness HB 255max. SAE steel 8620 offers high external strength and good internalstrength, making it highly wear resistant. AISI 8620 steel has a highercore strength than grades 8615 and 8617. SAE 8620 alloy steel isflexible during hardening treatments, thus enabling improvement ofcase/core properties. Pre hardened and tempered (uncarburized) 8620 ca...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our company since its inception, always regards product quality as enterprise life, continuously improve production technology, improve product quality and continuously strengthen enterprise total quality management, in strict accordance with the national standard ISO 9001:2000 for Hot Selling for AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Manufacturer in Jordan, We are confident to make great achievements in the future. We are looking forward to becoming one of your most reliable suppliers.


    AISI 8620 Steel

    is a low alloy nickel, chromium, molybdenum case hardening steel,
    generally supplied in the as rolled condition with a maximum hardness HB

    255max. SAE steel 8620 offers high external strength and good internal
    strength, making it highly wear resistant. AISI 8620 steel has a higher
    core strength than grades 8615 and 8617.

    SAE 8620 alloy steel is
    flexible during hardening treatments, thus enabling improvement of
    case/core properties. Pre hardened and tempered (uncarburized) 8620 can
    be further surface hardened by nitriding but will not respond
    satisfactorily to flame or induction hardening due to its low carbon
    content.

    Steel 8620 is suited for applications which require a
    combination of toughness and wear resistance. This grade is commonly
    supplied in round bar.

    1. AISI 8620 Steel Supply Range

    8620 Round Bar: diameter 80mm – 1200mm
    8620 Steel Plate: thickness 10mm – 1500mm x width 200mm – 3000mm
    8620 Square Bar: 140mm – 460mm
    8620 tubes are also available against your detailed request.
    Surface Finish: Black, Rough Machined, Turned or as per given requirements.

    2. SAE 8620 Steel Specification and Relevant Standards

    Country

    USA DIN BS BS

    Japan

    Standard

    ASTM A29 DIN 1654 EN 10084

    BS 970

    JIS G4103

    Grades

    8620

    1.6523/
    21NiCrMo2

    1.6523/
    20NiCrMo2-2

    805M20

    SNCM220

    3. ASTM 8620 Steels & Equilvalents Chemical Composition

    Standard Grade C Mn P S Si Ni Cr Mo
    ASTM A29 8620 0.18-0.23 0.7-0.9 0.035 0.040 0.15-0.35 0.4-0.7 0.4-0.6 0.15-0.25
    DIN 1654 1.6523/
    21NiCrMo2
    0.17-0.23 0.65-0.95 0.035 0.035 ≦0.40 0.4-0.7 0.4-0.7 0.15-0.25
    EN 10084 1.6523/
    20NiCrMo2-2
    0.17-0.23 0.65-0.95 0.025 0.035 ≦0.40 0.4-0.7 0.35-0.70 0.15-0.25
    JIS G4103 SNCM220 0.17-0.23 0.6-0.9 0.030 0.030 0.15-0.35 0.4-0.7 0.4-0.65 0.15-0.3
    BS 970 805M20 0.17-0.23 0.6-0.95 0.040 0.050 0.1-0.4 0.35-0.75 0.35-0.65 0.15-0.25

    4. AISI 8620 Steel Mechanical Properties

    • 8620 Physical Properties:

    Density (lb / cu. in.) 0.283
    Specific Gravity 7.8
    Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) 0.1
    Melting Point (Deg F) 2600
    Thermal Conductivity 26
    Mean Coeff Thermal Expansion 6.6
    Modulus of Elasticity Tension 31

    • 8620 Steel Mechanical Properties

    Properties Metric Imperial
    Tensile strength 530 MPa 76900 psi
    Yield strength 385 MPa 55800 psi
    Elastic modulus 190-210 GPa 27557-30458 ksi
    Bulk modulus (typical for steel) 140 GPa 20300 ksi
    Shear modulus (typical for steel) 80 GPa 11600 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30
    Izod Impact 115 J 84.8 ft.lb
    Hardness, Brinell 149 149
    Hardness, Knoop (converted from Brinell hardness) 169 169
    Hardness, Rockwell B (converted from Brinell hardness) 80 80
    Hardness, Vickers (converted from Brinell hardness) 155 155
    Machinability (hot rolled and cold drawn, based on 100 machinability for AISI 1212 steel) 65 65

    5. Forging of Material 8620 Steel

    AISI

    8620 alloy steel is forged at a start temperature of around 2250ºF
    (1230ºC) down to approximately 1700ºF(925ºC.) prior to the hardening
    heat treatment or carburizing. The alloy is air cooled after forging.

    6. ASTM 8620 Steel Heat Treatment

    • Annealing

    AISI

    8620 steel may be given a full anneal by heat to 820℃ – 850℃, and hold
    until temperature is uniform throughout the section and cool in furnace
    or air cooled.

    • Tempering

    Tempering

    of heat treated and water quenched parts of 8620 steels (not
    carburized) is done at 400 F to 1300 F to improve case toughness with
    minimal effect on its hardness. This will also reduce the possibility of

    grinding cracks.

    • Hardening

    The

    AISI steel 8620 will be austenitized at around 840°C – 870°C, and oil
    or water quenched depending upon section size and intricacy. Cool in Air

    or Oil required.

    • Normalizing

    1675ºF

    (910ºC) and air cool. This is another method of improving machinability

    in 8620 material; normalizing might also be used prior to case
    hardening.

    7. Machinability of SAE 8620 Steel

    The

    8620 alloy steel is readily machined after heat treatment and/or
    carburizing, should be at a minimum so as not to impair the hardened
    case of the part. Machining may be done by conventional means prior to
    heat treatment – after carburizing machining is usually limited to
    grinding.

    8. Welding of 8620 Materials

    The
    alloy 8620 may be welded as rolled condition by conventional methods,
    usually gas or arc welding. Preheating at 400 F is beneficial and
    subsequent heating after welding is recommended – consult the approved
    weld procedure for the method used. However, welding in the case
    hardened or through hardened condition is not recommended

    9. Application of ASTM 8620 Steel

    AISI

    8620 steel material is used extensively by all industry sectors for
    light to medium stressed components and shafts requiring high surface
    wear resistance with reasonable core strength and impact properties.

    Typical

    applications are: Arbors, Bearings, Bushings, Cam Shafts, Differential
    Pinions, Guide Pins, King Pins, Pistons Pins, Gears, Splined Shafts,
    Ratchets, Sleeves and other applications where it is helpful to have a
    steel that can be readily machined and carburized to controlled case
    depths.

  • Previous:
  • Next:



  • Do me a favor….click on the ads. :) My comment section is turned off because of the racism and disrespect towards Black Women. It will NOT be tolerated. If you’d like to speak to me directly for relationships advice, counseling sessions, booking questions or video topic suggestions please contact me via email me at welovesoncerae@gmail.com

    Contribute and help build my non profit multimedia company from the ground up “BlockEleven Communications Inc” by Donating: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=86SBRPUDMGLDE or visit http://BeMagMobile.com

    If you’d like to be featured in the next issue of BlockEleven Magazine please tell us your story theblockeleven@gmail.com

    Your donations also contribute to AZU Studios Photography Firm www.azustudios.com

    Subscribe to THE CLASSIC BLACK MAN SERIES LIVESTREAM SHOW. AIRS WEDNESDAYS AT 7PM https://www.youtube.com/watch?v=MxPDVqPrvlE

    -Follow me on Instagram: http://www.instagram.com/WeLoveSoncerae

    http://www.instagram.com/theazufirm

    http://www.instagram.com/theblockeleven

    -Like me on Facebook: http://www.facebook.com/soncerae
    -Visit my Website: http://soncerae.com
    -Follow me on Twitter: http://www.twitter.com/IAmSoncerae
    -Check out my Tumblr: http://www.IAmSoncerae.tumblr.com
    -Check out my Model Profile: http://www.modelmayhem.com/522692
    -Check out my spirituality and metaphysics channel! www.youtube.com/mssoncerae
    -For all of my computer geeks subscribe to my channel MissCPUTV www.youtube.com/misscputv/
    Some of my Music is Produced by: MarqTheInfinite FB: Marqis Ray-Anderson Soundcloud: MarqTheInfinite https://soundcloud.com/mrqrymnd/tracks

    I appreciate you watching. Remember why I do my videos, It’s so that you can understand that the story you know is not the only story there is. I tell you my story, my thoughts and feelings so you can understand black women better. So you can understand me better. And for those that may be experiencing what I am or may have experienced what I have, You can learn from my lessons. You can live a different story. I effectively communicate my message to you and use myself as an example so that you can begin or improve on effectively communicating your message to others. You get the real me! The good. The bad. The ugly. Thanks for being a part of my community. A part of something bigger. Thank you for spending your time with me! Have Vision & Stay Focused! Namaste :)



    Rows 5-6 of the Bars and Twists Crochet Cables Square.

    Play list here:

    https://www.youtube.com/playlist?list=PLKb0hQtf-GDO0Qgzt013u2LdKzrZ_W7Rt

    Part 1 here: https://youtu.be/TY2kx64eLU0
    Part 3 here: https://youtu.be/6AvtdXBtRvg

    Pattern on my website here:

    http://www.freewebs.com/bethintx/cablecrochetsquares.htm

    Ravelry page here:

    http://www.ravelry.com/patterns/library/cable-crochet-squares

    Play list for this pattern without text: https://www.youtube.com/playlist?list=PLKb0hQtf-GDPiiSPEbgg79Ky0Hio1T8-8

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House