Hot sale reasonable price L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 Supply to French

Hot sale reasonable price
 L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 Supply to French

Short Description:

In ASTM A681 standard, L6 steel grade is in L-type for special purpose tool steels. AISI L6 tool steel is in the general class of alloy, oil-hardening tool steel that is characterized by good toughness. ASTM L6 tool steel is suitable for use as tools, dies, and machine parts, which require a good combination of hardness and toughness. Due to its lower carbon content and relatively high nickel content, L6 tool steel has slightly better shock-resistance than more highly alloyed types and shoul...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for Hot sale reasonable price L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 Supply to French, We fully welcome customers from all over the world to establish stable and mutually beneficial business relationships, to have a bright future together.


    In ASTM A681 standard, L6 steel grade is in L-type for special purpose tool steels. AISI L6 tool steel
    is in the general class of alloy, oil-hardening tool steel that is
    characterized by good toughness. ASTM L6 tool steel is suitable for use
    as tools, dies, and machine parts, which require a good combination of
    hardness and toughness.

    Due to its lower carbon content and
    relatively high nickel content, L6 tool steel has slightly better
    shock-resistance than more highly alloyed types and should be used where
    some wear-resistance can be sacrificed for increased toughness.

    1. Relevant Steel Specification of L6 Tool Steel

    Country USA German Japan British
    Standard ASTM A681 DIN EN ISO 4957 JIS G4404 BS 4659
    Grades L6/T61206 1.2714/55NiCrMoV7 SKT4 BH224/5

    2. AISI L6 Steel Chemical Composition and Steel Equivalents

    ASTM A681 C Mn P S Si Cr V Mo Ni
    L6/T61206 0.65 0.75 0.25 0.80 0.03 0.03 0.10 0.50 0.60 1.20 . . . . . . . . . 0.50 1.25 2.00
    DIN ISO 4957 C Mn P S Si Cr V Mo Ni
    1.2714/55NiCrMoV7 0.50 0.60 0.60 0.90 0.03 0.02 0.10 0.40 0.80 1.20 0.05 0.15 0.35 0.55 1.50 1.80
    JIS G4404 C Mn P S Si Cr V Mo Ni
    SKT4 0.50 0.60 0.60 0.90 0.03 0.02 0.10 0.40 0.80 1.20 0.05 0.15 0.35 0.55 1.50 1.80
    BS 4659 C Mn P S Si Cr V Mo Ni
    BH224/5 0.49 0.57 0.70 1.00 0.03 0.025 . . . 0.35 0.70 1.10 . . . . . . 0.25 0.40 1.25 1.80

    3. ASTM L6 Tool Steel Mechanical Properties

    Steel L6 Physical Properties

    • Modulus of elasticity [103 x N/mm2]: 215

    • Density [g/cm3]: 7.84

    • Thermal conductivity [W/m.K]: 36.0

    • Electric resistivity [Ohm mm2/m]: 0.30

    • Specific heat capacity[J/g.K]: 0.46

    Mechanical Properties of L6 Steels

    Properties Metric Imperial
    Poisson’s ratio 0.27- 0.30 0.27- 0.30
    Elastic modulus 190-210 GPa 27557-30457 ksi

    4. Forging of L6 Tool Steel

    Forge at 1079°C (1975 F) down to 871°C (1600 F). Do not forge below 843°C (1550 F).

    5. AISI L6 Tool Steel Heat Treatment

    Hardening

    Preheating:
    Heat steel L6 at a rate not exceeding 204°C (400°F) per hour (222°C per
    hour) to 621-677°C (1150-1250°F) and equalize. Soak for 30 minutes for
    the first inch (25.4 mm) of thickness, plus 15 minutes for each
    additional inch (25.4 mm).

    Quenching

    Quench L6 tool steel in oil to 66-51°C (150-125°F).

    Tempering

    Temper
    L6 steels immediately after quenching. Hold at temperature for 1 hour
    per inch (25.4 mm) of thickness when tempering at 204°C (400°F), 4 hours
    minimum, then air cool to ambient temperature.
    However, where increased toughness is desired, at a sacrifice of some hardness, higher tempering temperatures are often used.

    AISI L6 steel does not become brittle, as many other die steels do, when tempered in the range of 232°C to 426°C (450 to 800°F).

    To
    minimize the possibility of cracking, the steel should be tempered
    immediately after hardening and should be heated slowly to the desired
    tempering temperature.

    Annealing

    Annealing of steel L6 must be performed after hot working and before re-hardening.

    Heat
    to 760°C (1400°F) and hold one hour per inch of maximum thickness. Then
    cool slowly with the furnace at a rate not exceeding 28°C per hour(50°F
    per hour) to 538°C (1000°F). Continue cooling to ambient temperature in
    the furnace or in air.

    For improved machinability, hold at 760°C
    (1400°F) for 1 hour per inch (25.4mm) of maximum thickness; 2 hours
    minimum. Then cool slowly with the furnace cool from 677°C (1250°F) to
    760°C (1400°F), hold for 8 hours, then air cool to ambient temperature.

    Because of its air-hardening ability, steel L6 should not be normalized.

    6. Machinability of Steel L6

    Machinability
    of tool steel L6 is very good. It rates 90% of the machinability of the
    W-group water hardening low alloy steels rated 100% as a baseline.

    7. Applications of ASTM A681 L6 Tool Steel

    AISI
    L6 cold working tool steel is for general purpose tools and dies where
    greater toughness is required, but with some sacrifice of
    abrasion-resistance.

    Typically used below applications:

    • spindles,

    • forming rolls,

    • punches,

    • blanking and forming dies,

    • trimmer dies,

    • clutch parts,

    • pawls,

    • bearings,

    • chucks parts,

    • rollers,

    • knuckle pins,

    • clutch pins,

    • shear blades

  • Previous:
  • Next:



  • Answers to selected questions (click “SHOW MORE”):

    2d3a

    Contact info: Yiheng.Wang@lonestar.edu

    What’s new in 2015?
    1. Closed-caption made by myself! — not the automatic subtitle anymore.
    2. Learning objectives added for each video.
    3. Quiz questions added — including end-of assessment questions and preparatory, exploratory questions.
    4. Mistakes fixed and cleaned up.
    5. New examples/contents for selective videos.

    My old videos and playlists will still be left on YouTube. Feel free to watch either one. Personally I think the revised videos are better mainly because of the subtitle.

    Learning objectives of this video:

    1. To introduce particle curvilinear motion, which is the study of particle motion along a curved path.
    2. To analyze curvilinear motion using rectangular coordinate system.



    http://www.trueswords.com/musashi-folded-elite-midnight-kame-katana-p-6096.html

    The Musashi forge is identified for continually generating useful and elegant katana swords with an remarkable worth mixed with spectacular overall performance.

    Our new Folded Elite series carries on to increase the bar by providing differentially hardened folded metal blades mixed with special fittings. Wholly handmade with shut supervision and consideration to detail, these swords are designed to be collection and dojo centre parts.

    Both of those 1045 and 1060 high carbon metal are fastened alongside one another and folded eleven times resulting in 4096 levels. The metal is then formed into the blade geometry and clay tempered to produce differential hardness and a genuine hamon line. The temper procedure also creates an edge hardness of 58RC. Now in its last stage of output, the blade is hand honed for an impressively sharp edge, really polished, inspected and coated with protecting oil.

    The hamon line detail is on the multi-metal layered blade. The hamon line distinguishes in between the more difficult edge metal and the additional versatile spine metal, marking in which the metallic variations its hardness. The levels of metal are designed noticeable along the hamon line, resulting in a wonderful and special layered wave hamon.

    Merchandise Technical specs:

    Fully useful samurai sword function of art.
    Stunning workmanship and consideration to detail.

    Folded high carbon metal Damascus blade with 4096 levels.
    Clay tempering procedure with h2o quench.

    58 RC edge (HA) hardness, 42 RC spine (MUNE) hardness.
    Hamon and hardness designed with temper procedure.
    Serious hamon, not wire brushed or printed.
    Serious ray skin with cotton/nylon twine wrapped grip.
    Brass Tsuba, Fuchi and Kashira.
    Incredibly sharp hand honed edge.
    Highly polished blade.
    Handmade sword.
    Hardwood tackle with dual bamboo pegs.
    Hardwood scabbard with high excellent piano paint complete.
    forty.five in. in general, 27.five in. blade, 11 in. tackle.
    Arrives serialized with Certification of Authenticity.
    Contains hardwood situation, black sword bag and cleaning kit.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup