Hot sale reasonable price AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Factory from France
AISI 4340 steel is a medium carbon, low alloy steel known for its toughness andstrength in relatively large sections. AISI 4340 is also one kind ofnickel chromium molybdenum steels. 4340 alloy steel is generallysupplied hardened and tempered in the tensile range of 930 – 1080 Mpa.Pre hardened and tempered 4340 steels can be further surface hardened by flame or induction hardening and by nitriding. The 4340 steel has goodshockand impact resistance as well as wear and abrasion resistance inthe ...
We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Hot sale reasonable price AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Factory from France, We sincerely welcome domestic and foreign merchants who calls, letters asking, or to plants to negotiate, we will offer you quality products and the most enthusiastic service,We look forward to your visit and your cooperation.
AISI 4340 steel
is a medium carbon, low alloy steel known for its toughness and
strength in relatively large sections. AISI 4340 is also one kind of
nickel chromium molybdenum steels. 4340 alloy steel is generally
supplied hardened and tempered in the tensile range of 930 – 1080 Mpa.
Pre hardened and tempered 4340 steels can be further surface hardened by
flame or induction hardening and by nitriding. The 4340 steel has good
shockand impact resistance as well as wear and abrasion resistance in
the hardened condition. AISI 4340 steel properties offer good ductility
in the annealed condition, allowing it to be bent or formed. Fusion and
resistance welding is also possible with our 4340 alloy steel. ASTM 4340
material is often utilized where other alloy steels do not have the
hardenability to give the strength required.For highly stressed parts
it is excellent choice. AISI4340 alloy steelcan also be machined by
all customary methods.
Due to availability the ASTM 4340 grade steel is often substituted
with European based standards 817M40/EN24 and 1.6511/36CrNiMo4 or Japan
based SNCM439 steel. You have the detailed data of 4340 steel below.
1. AISI4340 Steel Specification and Relevant Standards
|Standard||ASTM A29||EN 10250||BS 970||JIS G4103|
2. ASTM 4340 Steels And Equilvalents Chemical Composition
|JIS G4103||SNCM 439/SNCM8||0.36-0.43||0.60-0.90||0.030||0.030||0.15-0.35||1.60-2.00||0.60-1.00||0.15-0.30|
3. AISI Alloy 4140 SteelMechanical Properties
(Heat Treated Condition )
|Tensile Strength MPa||Yield Strength
|Thermal expansion co-efficient (20°C/68°F, specimen oil hardened, 600°C (1110°F) temper||12.3 μm/m°C||6.83 μin/in°F|
|Thermal conductivity (typical steel)||44.5 W/mK||309 BTU in/hr.ft2.°F|
4. Forging of 4340 Alloy Steel
the steel 4340 first, heat up to 1150°C – 1200°C maximum for forging,
hold until temperature is uniform throughout the section.
Do not forge
below 850 °C. 4340 has good forging characteristics but care must be
taken when cooling as the steel shows susceptibility to cracking.
Following forging operation the work piece should be cooled as slowly as
possible. And cooling in in sand or dry lime is recommended etc.
5. AISI 4340 Steel Grade Heat Treatment
- Next: 50% OFF Price For Metal Forms in Rio de Janeiro
pre-hardened steel stress relieving is achieved by heating steel 4340
to between 500 to 550°C. Heat to 600 °C – 650 °C, hold until temperature
is uniform throughout the section, soak for 1 hour per 25 mm section,
and cool in still air.
full anneal may be done at 844°C (1550 F) followed by controlled
(furnace) cooling at a rate not faster than 10°C (50 F) per hour down to
315°C (600 F). From 315°C 600 F it may be air cooled.
4340 alloy steel should be in the heat treated or normalized and heat
treated condition before tempering. The tempering temperature for
depends upon the strength level desired. For strength levels in the 260 –
280 ksi range temper at 232°C (450 F). For strength in the 125 – 200
ksi range temper at 510°C (950 F). And don’t temper the 4340 steels if
it is in the 220 – 260 ksi strength range as tempering can result in
degradation of impact resistance for this level of strength.
Tempering should be avoided if possible within the range 250 °C – 450 °C due to temper brittleness.
Flame or Induction Hardening
As mentioned above, pre-hardened and tempered 4340 steel bars or plates can be further surface hardened by either the flame or induction hardening
methods resulting in a case hardness in excess of Rc 50. AISI 4340
steel parts should be heated as quickly as possible to the austenitic
temperature range (830 °C – 860 °C) and required case depth followed by
an immediate oil or water quenching, depending upon hardness required,
workpiece size/shape and quenching arrangements.
quenching to hand warm, tempering at 150°C – 200°C will reduce stresses
in the case with minimal effect on its hardness.
All de-carburised surface material must first be removed to ensure best results.
and tempered 4340 alloy steel can also be nitrided, giving a surface
hardness of up to Rc 60. Heat to 500°C – 530°C and hold for sufficient
time (from 10 to 60 hours) to develop the depth of case. Nitriding
should be followed by slow cooling (no quench) reducing the problem of
distortion. The nitrided grade 4340 materials can therefore be machined
to near final size, leaving a small grinding allowance only. The tensile
strength of the 4340 steel material core is usually not affected since
the nitriding temperature range is generally below the original
tempering temperature employed.
Surface hardness achievable is 600 to 650HV.
is best done with the alloy steel 4340 in the annealed or normalized
and tempered condition. It can be readily machined by all conventional
methods such as sawing, turning, drilling etc. However in the high
strength conditions of 200 ksi or greater the machinability is only from
25% to 10% that of the alloy in the annealed condition.
of steel 4340 in the hardened and tempered condition (as normally
supplied), is not recommended and should be avoided if at all possible,
because of the danger of quench cracking, as the mechanical properties
will be altered within the weld heat affected zone.
must be carried out, pre-heat to 200 to 300°C and maintain this while
welding. Immediately after welding stress relieve at 550 to 650°C, prior
to hardening and tempering.
If welding in the hardened and
tempered condition is really necessary, then the work piece, immediately
on cooling to hand warm, should be if possible stress relieved at 15 °C
below the original tempering temperature.
8. Application of 4340 Steel
4340 steel is used in most industry sectors for applications requiring
higher tensile/yield strength than 4140 steel can provide.
Some typical applications such as:
Aircraft Landing Gear
Oil and Gas Drilling,
Warm and Cold Forming,
Transfer Systems, like power transmission gears and shafts.
engineering industries and structural use applications, such as: heavy
duty shafts, gears, axles, spindles, couplings, pins, chucks, molds etc.
TMK is one of the world’s leading producers of steel pipes and a global supplier of pipe solutions for the oil and gas industry. TMK produces a wide range of welded large diameter longitudinal and spiral pipes used in oil and gas trunk pipelines and compliant with Russian and international standards.
Brass Dealers Alhambra http://smartrecycling.com/scrap-metal-recycling-los-angeles/
We provide the greatest range of scrap metal recycling solutions and collection containers for recyclables in the Alhambra area. From specialized equipment for reclamation, disassembly or collection, to identifying the aftermarket most advantageous to you, Smart Recycling’s professional knowledge and flexibility is second to no one.
Smart Recycling, Inc.’s comprehensive experience in the metals business makes it possible for us to obtain highly competitive prices for your metals:
Fixed Broker Sales – Let Smart Recycling, Inc. broker your materials to get the greatest possible return.
Post Reclamation Salvage – Our means to optimize sales of your commodities is the best.
Direct Supplier to Foundries and Mills – Removing the middle-man will allow for us to pay “top-dollar” to our clients.
We maintain a steel shredder at our premises – Our investment in capital equipment leaves extra money in your pocket.
Brass Dealers Alhambra
In 2010, U.S. nonferrous scrap recovery included:
Light weight aluminum Recycling
Getting to identify the major types of scrap steel is an essential action in ending up being a successful scrap metal supplier.
With a recovery of 4.6 million metric heaps yearly in the U.S, a lot more light weight aluminum is recycled compared to other nonferrous metals. Light weight aluminum is light and generally easy to flex. It will certainly not emit sparks on a grinding wheel, and is nonmagnetic, unlike similarly tinted steels such as steel. Although aluminum comes in different grades, it is tough to discern between them.
Brass Dealers Alhambra
Similar to any metal, less contamination boosts the value, such as taking apart tools to divide various sorts of metal, or removing other impurities such as encasement with concrete or other material. Webbing and also screws need to be eliminated from patio chair. Look for light weight aluminum scrap in real estate and demolition jobs, consisting of door and home window frameworks, rain gutters, house siding, and also cord. In car stores, aluminum could be located in transmission cases and pistons.
Copper is the third most commonly recycled nonferrous steel. As a matter of fact, over 80% of copper ever generated still exists. It is simple to determine since of its unique colour, as well as that it is nonmagnetic. When positioned versus a grinding wheel, copper will not trigger.
Stainless Steel Recycling
Stainless steel is the second most frequently recycled nonferrous steel. It inclusives steel alloys which contains a minimum proportion of chromium. Another steel commonly utilized as an alloy in stainless steel is nickel. Unlike various other nonferrous steels, stainless steel can be magnetic, relying on nickel content. Much more nickel decreases the magnetic homes of the stainless steel. Stainless steel will certainly trigger in reaction to a grinding wheel.
Brass is an alloy of copper as well as zinc, along with little quantities of various other steels including manganese, tin, iron or light weight aluminum. The color array of brass consists of red, yellow, gold and silver. In terms of magnetic destination, it can reveal from nonmagnetic to a little magnetic. On the grinding wheel it will certainly vary in between no triggering to brief red stimulates.
Brass Dealers Alhambra