Hot sale Factory L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 United States

Hot sale Factory
 L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 United States

Short Description:

In ASTM A681 standard, L6 steel grade is in L-type for special purpose tool steels. AISI L6 tool steel is in the general class of alloy, oil-hardening tool steel that is characterized by good toughness. ASTM L6 tool steel is suitable for use as tools, dies, and machine parts, which require a good combination of hardness and toughness. Due to its lower carbon content and relatively high nickel content, L6 tool steel has slightly better shock-resistance than more highly alloyed types and shoul...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We insist on offering high quality production with good business concept, honest sales and the best and fast service. it will bring you not only the high quality product and huge profit, but the most significant is to occupy the endless market for Hot sale Factory L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 United States, Adhering to the business principle of mutual benefits, we have won good reputation among our customers because of our perfect services, quality products and competitive prices. We warmly welcome customers from home and abroad to cooperate with us for common success.


    In ASTM A681 standard, L6 steel grade is in L-type for special purpose tool steels. AISI L6 tool steel
    is in the general class of alloy, oil-hardening tool steel that is
    characterized by good toughness. ASTM L6 tool steel is suitable for use
    as tools, dies, and machine parts, which require a good combination of
    hardness and toughness.

    Due to its lower carbon content and
    relatively high nickel content, L6 tool steel has slightly better
    shock-resistance than more highly alloyed types and should be used where
    some wear-resistance can be sacrificed for increased toughness.

    1. Relevant Steel Specification of L6 Tool Steel

    Country USA German Japan British
    Standard ASTM A681 DIN EN ISO 4957 JIS G4404 BS 4659
    Grades L6/T61206 1.2714/55NiCrMoV7 SKT4 BH224/5

    2. AISI L6 Steel Chemical Composition and Steel Equivalents

    ASTM A681 C Mn P S Si Cr V Mo Ni
    L6/T61206 0.65 0.75 0.25 0.80 0.03 0.03 0.10 0.50 0.60 1.20 . . . . . . . . . 0.50 1.25 2.00
    DIN ISO 4957 C Mn P S Si Cr V Mo Ni
    1.2714/55NiCrMoV7 0.50 0.60 0.60 0.90 0.03 0.02 0.10 0.40 0.80 1.20 0.05 0.15 0.35 0.55 1.50 1.80
    JIS G4404 C Mn P S Si Cr V Mo Ni
    SKT4 0.50 0.60 0.60 0.90 0.03 0.02 0.10 0.40 0.80 1.20 0.05 0.15 0.35 0.55 1.50 1.80
    BS 4659 C Mn P S Si Cr V Mo Ni
    BH224/5 0.49 0.57 0.70 1.00 0.03 0.025 . . . 0.35 0.70 1.10 . . . . . . 0.25 0.40 1.25 1.80

    3. ASTM L6 Tool Steel Mechanical Properties

    Steel L6 Physical Properties

    • Modulus of elasticity [103 x N/mm2]: 215

    • Density [g/cm3]: 7.84

    • Thermal conductivity [W/m.K]: 36.0

    • Electric resistivity [Ohm mm2/m]: 0.30

    • Specific heat capacity[J/g.K]: 0.46

    Mechanical Properties of L6 Steels

    Properties Metric Imperial
    Poisson’s ratio 0.27- 0.30 0.27- 0.30
    Elastic modulus 190-210 GPa 27557-30457 ksi

    4. Forging of L6 Tool Steel

    Forge at 1079°C (1975 F) down to 871°C (1600 F). Do not forge below 843°C (1550 F).

    5. AISI L6 Tool Steel Heat Treatment

    Hardening

    Preheating:
    Heat steel L6 at a rate not exceeding 204°C (400°F) per hour (222°C per
    hour) to 621-677°C (1150-1250°F) and equalize. Soak for 30 minutes for
    the first inch (25.4 mm) of thickness, plus 15 minutes for each
    additional inch (25.4 mm).

    Quenching

    Quench L6 tool steel in oil to 66-51°C (150-125°F).

    Tempering

    Temper
    L6 steels immediately after quenching. Hold at temperature for 1 hour
    per inch (25.4 mm) of thickness when tempering at 204°C (400°F), 4 hours
    minimum, then air cool to ambient temperature.
    However, where increased toughness is desired, at a sacrifice of some hardness, higher tempering temperatures are often used.

    AISI L6 steel does not become brittle, as many other die steels do, when tempered in the range of 232°C to 426°C (450 to 800°F).

    To
    minimize the possibility of cracking, the steel should be tempered
    immediately after hardening and should be heated slowly to the desired
    tempering temperature.

    Annealing

    Annealing of steel L6 must be performed after hot working and before re-hardening.

    Heat
    to 760°C (1400°F) and hold one hour per inch of maximum thickness. Then
    cool slowly with the furnace at a rate not exceeding 28°C per hour(50°F
    per hour) to 538°C (1000°F). Continue cooling to ambient temperature in
    the furnace or in air.

    For improved machinability, hold at 760°C
    (1400°F) for 1 hour per inch (25.4mm) of maximum thickness; 2 hours
    minimum. Then cool slowly with the furnace cool from 677°C (1250°F) to
    760°C (1400°F), hold for 8 hours, then air cool to ambient temperature.

    Because of its air-hardening ability, steel L6 should not be normalized.

    6. Machinability of Steel L6

    Machinability
    of tool steel L6 is very good. It rates 90% of the machinability of the
    W-group water hardening low alloy steels rated 100% as a baseline.

    7. Applications of ASTM A681 L6 Tool Steel

    AISI
    L6 cold working tool steel is for general purpose tools and dies where
    greater toughness is required, but with some sacrifice of
    abrasion-resistance.

    Typically used below applications:

    • spindles,

    • forming rolls,

    • punches,

    • blanking and forming dies,

    • trimmer dies,

    • clutch parts,

    • pawls,

    • bearings,

    • chucks parts,

    • rollers,

    • knuckle pins,

    • clutch pins,

    • shear blades

  • Previous:
  • Next:



  • New Hard Drills from http://www.ttproducts.com new design and developed Hard Drills make drilling harden steel easily – Drilling a tow bolt 12.9 is effortless using Hard Drills from TTP.
    voucher code TRADE20 and save 20%
    North America cobalt drill sales visit http://www.ttp-hard-drills.net
    Europe – http://www.ttp-hard-drills.com



    http://www.unisteels.net/ One of the prominent & reliable trading companies involved in exporting and supplying of ferrous/non ferrous metal products that includes pipes, fittings, flanges, sheets, etc. Our gamut caters to the diverse requirement of varied industries.

    Our range of ferrous and non ferrous metal products are categorized as Inconel 600, Stainless Steel 310 Plates & Pipes, Titanium Sheet Plates, High Nickel Base Super Alloys, Steel Flanges, Butt Weld Fittings, Forged Fittings and Steel Tubes.

    We have form a rich vendor base locating at the different parts of the country and assisting us in prompt and year around delivery. Each vendor is critical for our market credibility therefore we make certain that we maintain association with the one, observing high quality parameters.

    We have emerged as one of the foremost trader of wide gamut of ferrous and non-ferrous metal products like pipes, plates, flanges and allied products.

    Our range of inconel 600 features inconel pipes, coils and round bars. These products are widely used in diverse industries. Also the range includes stainless steel 310 plates & pipes, titanium sheet plates and high nickel base super alloys.

    Steel Tubes – http://www.unisteels.net/steel-tubes.html

    We offer a comprehensive range of steel tubes, which is available in different specifications of dimension and materials. The entire gamut has gained huge appreciation for their qualitative features. Widely used in industrial & commercial applications, our range of steel tubes is provided in diverse specifications.

    Steel Flanges – http://www.unisteels.net/steel-flanges.html

    We are the largest supplier and exporter of various types of flanges whose application in various industries and is known for their durability and strength. The flanges that we offer to our clients are available in different grades and qualities.

    Forged Fittings – http://www.unisteels.net/forged-fittings.html

    We are associated with few of the best manufacturers for forged fittings that are widely acknowledged in the market for their durability and corrosion resistance. The product has been developed by keeping varied requirements of our clients in consideration.

    Titanium Products – http://www.unisteels.net/titanium-products.html

    We offer an exclusive range of titanium sheet plates that are made supreme quality titanium sheets. We make sure that our trusted manufacturers undergo stringent quality tests during the manufacturing process so that when we procure and trade those products our clients do not face any inconvenience.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane