Hot New Products AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 in Lesotho
AISI 4340 steel is a medium carbon, low alloy steel known for its toughness andstrength in relatively large sections. AISI 4340 is also one kind ofnickel chromium molybdenum steels. 4340 alloy steel is generallysupplied hardened and tempered in the tensile range of 930 – 1080 Mpa.Pre hardened and tempered 4340 steels can be further surface hardened by flame or induction hardening and by nitriding. The 4340 steel has goodshock and impact resistance as well as wear and abrasion resistanc...
The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme for Hot New Products AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 in Lesotho, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
is a medium carbon, low alloy steel known for its toughness and
strength in relatively large sections. AISI 4340 is also one kind of
nickel chromium molybdenum steels. 4340 alloy steel is generally
supplied hardened and tempered in the tensile range of 930 – 1080 Mpa.
Pre hardened and tempered 4340 steels can be further surface hardened by
flame or induction hardening and by nitriding. The 4340 steel has good
shock and impact resistance as well as wear and abrasion resistance in
the hardened condition. AISI 4340 steel properties offer good ductility
in the annealed condition, allowing it to be bent or formed. Fusion and
resistance welding is also possible with our 4340 alloy steel. ASTM 4340
material is often utilized where other alloy steels do not have the
hardenability to give the strength required. For highly stressed parts
it is excellent choice. AISI 4340 alloy steel can also be machined by
all customary methods.
Due to availability the ASTM 4340 grade steel is often substituted
with European based standards 817M40/EN24 and 1.6511/36CrNiMo4 or Japan
based SNCM439 steel. You have the detailed data of 4340 steel below.
1. AISI 4340 Steel Specification and Relevant Standards
|Standard||EN 10250||JIS G4103|
2. ASTM 4340 Steels And Equilvalents Chemical Composition
|JIS G4103||SNCM 439/SNCM8||0.36-0.43||0.60-0.90||0.030||0.030||0.15-0.35||1.60-2.00||0.60-1.00||0.15-0.30|
3. AISI Alloy 4140 Steel Mechanical Properties
(Heat Treated Condition )
|Tensile Strength MPa||Yield Strength
|Thermal expansion co-efficient (20°C/68°F, specimen oil hardened, 600°C (1110°F) temper||12.3 µm/m°C||6.83 µin/in°F|
|Thermal conductivity (typical steel)||44.5 W/mK||309 BTU in/hr.ft².°F|
4. Forging of 4340 Alloy Steel
the steel 4340 first, heat up to 1150°C – 1200°C maximum for forging,
hold until temperature is uniform throughout the section.
Do not forge
below 850 °C. 4340 has good forging characteristics but care must be
taken when cooling as the steel shows susceptibility to cracking.
Following forging operation the work piece should be cooled as slowly as
possible. And cooling in in sand or dry lime is recommended etc.
5. AISI 4340 Steel Grade Heat Treatment
pre-hardened steel stress relieving is achieved by heating steel 4340
to between 500 to 550°C. Heat to 600 °C – 650 °C, hold until temperature
is uniform throughout the section, soak for 1 hour per 25 mm section,
and cool in still air.
full anneal may be done at 844°C (1550 F) followed by controlled
(furnace) cooling at a rate not faster than 10°C (50 F) per hour down to
315°C (600 F). From 315°C 600 F it may be air cooled.
4340 alloy steel should be in the heat treated or normalized and heat
treated condition before tempering. The tempering temperature for
depends upon the strength level desired. For strength levels in the 260 –
280 ksi range temper at 232°C (450 F). For strength in the 125 – 200
ksi range temper at 510°C (950 F). And don’t temper the 4340 steels if
it is in the 220 – 260 ksi strength range as tempering can result in
degradation of impact resistance for this level of strength.
Tempering should be avoided if possible within the range 250 °C – 450 °C due to temper brittleness.
Flame or Induction Hardening
As mentioned above, pre-hardened and tempered 4340 steel bars or plates can be further surface hardened by either the flame or induction hardening
methods resulting in a case hardness in excess of Rc 50. AISI 4340
steel parts should be heated as quickly as possible to the austenitic
temperature range (830 °C – 860 °C) and required case depth followed by
an immediate oil or water quenching, depending upon hardness required,
workpiece size/shape and quenching arrangements.
quenching to hand warm, tempering at 150°C – 200°C will reduce stresses
in the case with minimal effect on its hardness.
All de-carburised surface material must first be removed to ensure best results.
and tempered 4340 alloy steel can also be nitrided, giving a surface
hardness of up to Rc 60. Heat to 500°C – 530°C and hold for sufficient
time (from 10 to 60 hours) to develop the depth of case. Nitriding
should be followed by slow cooling (no quench) reducing the problem of
distortion. The nitrided grade 4340 materials can therefore be machined
to near final size, leaving a small grinding allowance only. The tensile
strength of the 4340 steel material core is usually not affected since
the nitriding temperature range is generally below the original
tempering temperature employed.
Surface hardness achievable is 600 to 650HV.
is best done with the alloy steel 4340 in the annealed or normalized
and tempered condition. It can be readily machined by all conventional
methods such as sawing, turning, drilling etc. However in the high
strength conditions of 200 ksi or greater the machinability is only from
25% to 10% that of the alloy in the annealed condition.
of steel 4340 in the hardened and tempered condition (as normally
supplied), is not recommended and should be avoided if at all possible,
because of the danger of quench cracking, as the mechanical properties
will be altered within the weld heat affected zone.
must be carried out, pre-heat to 200 to 300°C and maintain this while
welding. Immediately after welding stress relieve at 550 to 650°C, prior
to hardening and tempering.
If welding in the hardened and
tempered condition is really necessary, then the work piece, immediately
on cooling to hand warm, should be if possible stress relieved at 15 °C
below the original tempering temperature.
8. Application of 4340 Steel
4340 steel is used in most industry sectors for applications requiring
higher tensile/yield strength than 4140 steel can provide.
Some typical applications such as:
Aircraft Landing Gear
Oil and Gas Drilling,
Warm and Cold Forming,
Transfer Systems, like power transmission gears and shafts.
engineering industries and structural use applications, such as: heavy
duty shafts, gears, axles, spindles, couplings, pins, chucks, molds etc.
My second channel for unboxings, product reviews and travel vlogs: http://bit.ly/21QMD7z
Chocolate chip popcorn bars video: http://bit.ly/2c538Xb
1/2 cup butter at room temperature
1 cup granulated white sugar
1/3 cup brown sugar packed
2 tsp vanilla extract
3/4 cup all purpose flour
1/2 cup unsweetened cocoa powder
1/4 tsp salt (omit if using salted butter)
1/2 cup butter at room temperature
3/4 cup pack brown sugar
2 tbsp white granulated sugar
1 large egg
1 tsp vanilla extract
1 1/2 cups all purpose flour
1/2 tsp baking soda
1/2 tsp salt (reduce to 1/4 tsp if using salted butter)
1 cup chocolate chips
Cereal Treat layer
3 tbsp butter
1-10oz bag mini marshmallows
4 cups rice cereal
Brownie layer instructions:
Beat the butter, white sugar & brown sugar until light and fluffy.
Add the eggs and the vanilla and mix until combined.
Blend in the cocoa and flour (and salt if using).
Spread into the bottom of a 9×9″ or 8×10″ pan that has been well greased or lined with aluminum foil (foil greased too).
Cookie layer instructions:
Beat the butter and the sugar (white and brown) together until light and fluffy.
Add the egg and vanilla and mix until combined.
Mix in the flour, baking soda and salt (if using).
Stir in chocolate chips.
Spoon chocolate chip cookie batter over the brownie batter. Spread it out evenly being careful not to push it down into the brownie batter.
Bake at 325F for 30-40 minutes (I used a glass pan and mine took about 45 minutes) until toothpick inserted in center comes out clean.
For Rice Krispie layer:
Melt the butter and marshmallows together (on stove on low or in bowl in microwave).
Stir and then add in the cereal. Stir until cereal is coated.
Spread the mixture while still warm over the cookie layer.
Allow to cool and slice into squares.
Recipe found in a Food Network Magazine (Sept. 2016 edition).
INFO ABOUT ME
My name is Tammy and I live in Northeastern Ontario Canada. I am a married, full-time working mom of one teenaged son.
Contact me here:
I LOVE comments and I read each and every one of them.
I try very hard to answer questions when I can, but there is an excellent chance your question has been answered in the description box or in the comments, so please take a look.
My favourite channel here on YouTube is CookingAndCrafting. Beth lives in Hawaii and makes great meals, desserts and crafts. We met here on YouTube by commenting on each others videos and have since met each other several times in “real life”. She is a lovely person and a great friend. Please check her out http://bit.ly/1TClroH
For the most varied installation projects, Gizom will have non-Ferro and stainless steel and other alloys ready. Our delivery programme includes aluminium, copper-nickel, copper, bronze, stainless steel, aluminium brass and other alloys on request. Also we provide business supplies like barrel handling equipment.
For more information and our product range visit http://www.gizom.nl