High Quality AISI 1053 Carbon Steel (UNS G10530) Manufacturer in Rome

High Quality
 AISI 1053 Carbon Steel (UNS G10530) Manufacturer in Rome

Short Description:

Chemical Composition The chemical composition of AISI 1053 carbon steel is outlined in the following table. Element Content (%) Iron, Fe 98.36-98.82 Manganese, Mn 0.7-1.0 Carbon, C 0.48-0.55 Sulfur, S 0.05 Phosphorous, P 0.04 Physical Properties The physical properties of AISI 1053 carbon steel are tabulated below. Properties Metric Imperial Density 7.7-8.03 g/cm3 0.278-0.290 l...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our company insists all along the quality policy of "product quality is base of enterprise survival; customer satisfaction is the staring point and ending of an enterprise; persistent improvement is eternal pursuit of staff" and the consistent purpose of "reputation first, customer first" for High Quality AISI 1053 Carbon Steel (UNS G10530) Manufacturer in Rome, We, with great passion and faithfulness, are willing to provide you with perfect services and striding forward with you to create a bright future.


    Chemical Composition

    The chemical composition of AISI 1053 carbon steel is outlined in the following table.

    Element Content (%)
    Iron, Fe 98.36-98.82
    Manganese, Mn 0.7-1.0
    Carbon, C 0.48-0.55
    Sulfur, S 0.05
    Phosphorous, P 0.04

    Physical Properties

    The physical properties of AISI 1053 carbon steel are tabulated below.

    Properties Metric Imperial
    Density 7.7-8.03 g/cm3 0.278-0.290 lb/in3

    Mechanical Properties

    The following table shows mechanical properties of AISI 1053 carbon steel.

    Properties Metric Imperial
    Elastic modulus 190-210 GPa 29700-30458 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30

  • Previous:
  • Next:



  • Cryogenic/LIN machining is the application of a small jet of liquid nitrogen (LIN) or a controlled-temperature mixture of LIN and gaseous nitrogen (GAN) to the cutting zone. This process replaces standard flood-cooled or dry cutting operations. Temperatures in a range of 32˚ F to -250˚ F can be maintained. Visit our web site at http://www.industrialcryotech.com for more information.



    * i-Center indexable center drill
    The world’s first indexable center drill.
    Shortens set up and center drilling time.
    Increases tool life, which reduces tooling cost.

    NC2033: K20F grade carbide insert and TiAlN coated for carbon steel, alloy steel, high alloy
    steel, cast iron and Al, Al-alloy, Cu, Cu-alloy.
    2 cutting edges, high performance for center drilling.
    Metric sizes: DIN 332 A+B, DIN 332 R , Ø1~Ø10 mm
    Inch sizes: ANSI (BS) #2 ~10
    Special inserts are available on request

    * High Speed, High Feed Rate
    High Performance speed and feed can be achieved due to the specially ground
    insert and rigid holder design. For example, for drilling Ø3.15mm hole on alloy steel, running at 6000 r.p.m. and feed rate 600mm/min. (0.1mm/rev.)

    * Easy Tool Length Setting
    The axial position accuracy of the insert is 0.05mm ( .0 0 2″) . It is not necessary to reset
    the tool length when changing insert or cutting edge.

    * Excellent Repeatability
    The insert is securely positioned by two locating
    pins and clamped by one insert screw at the center.
    The positioning repeatability of the insert is within 0.02 mm(.0008″) in radial direction,
    thus ensuring conformity to any national standard.

    * Extended Tool Life
    Coolant can be supplied
    through the center of the holder to increase performance and
    extend tool life. Insert geometry, grades and coating process
    are specifically engineered for centering applications.

    * Universal and Easily Fitted with Any Available Shank
    The tool holder is made of high alloy steel, hardened and ground to h6 tolerances
    with a flat. It’s easy for both stationar y and rotating tools.
    ————————————————————————————————————————
    Nine9 Indexable Engraving Tool
    This is a revolutionary new concept of engraving tools with indexable carbide inserts.
    They offer you the ability to produce HIGH QUALITY ENGRAVING in most materials.
    The latest coated carbide grades help you to obtain higher speed and feed rate,
    dramatically reducing your cycle time.

    Main Features
    • High Positive Rake Angle
    Indexable insert.
    Suitable for engraving all types of materials,
    such as plastic, non-ferrous metal, aluminum, carbon steel and stainless steel.
    • Multi-Side Grinding
    Full peripherally ground insert to ensure effi cient repeatability.
    It performs excellently without producing any burrs,
    especially in aluminum and stainless steel.
    • High Speed, High Feed Rate
    Designed to run at high speed, up to 20000 r.p.m.
    Feed rate 0.08mm (0.003″) / rev. apply to aluminum;
    0.05mm (0.002″) / rev. apply to stainless steel.
    Reduces engraving cycle time!
    • Economical
    Each indexable insert has 2 cutting edges.
    No resharpening required. Tool length is unchanged.
    No need to reset after changing insert or cutting edge.
    Excellent repeatability!
    • Applications
    Universal for marking number and almost any character.
    45° , 60° engraving inserts which can be used for marking serial numbers ;
    product codes ; dial scales ; signs ; logo outlines and almost any character
    which can be created by the NC programming system.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House