High Efficiency Factory Metal Forms in Cologne

High Efficiency Factory
 Metal Forms in Cologne

Short Description:

Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Ø Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker)             Shafts Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg             Discs, pu...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for High Efficiency Factory Metal Forms in Cologne, We fully welcome customers from all over the world to establish stable and mutually beneficial business relationships, to have a bright future together.


    Steel products can also be divided by their shapes. We can produce in the following shapes:

    Forged bars

    Length up to 16,000 mm
    Round from 80 to 1,200 mm Ø
    Square from 140 mm to 460 mm
    Flat from 30 x 25 mm to 2.000 x 600 mm
    (in case of a smaller width correspondingly thicker)

    [Translate to English:] Geschmiedete Stäbe
               

    Shafts

    Barrel/flange diameter up to 1.600 mm Ø
    Length up to 15.000 mm
    Weight from 10 kg to 35.000 kg

    [Translate to English:] Wellen
               

    Discs, punched discs, hubs

    Diameter up to 1.200 mm
    (smaller dias correspondingly thicker)
    Thickness up to 600 mm

     

     

    [Translate to English:] Scheiben, Lochscheiben, Nabenscheiben
               

    Blocks, plates (forged three-dimensionally)

    Length max. 6.000 mm
    Width max. 1.800 mm
    Thickness max. 1.000 mm
    (in case of smaller thickness greater length and width)
    Weight max. 30.000 kg

     

     

    [Translate to English:] Blöcke, Platten
               

    Forged tubes, cylinders and other hollow forgings

    Inner diameter 160 mm to 600 mm
    Length up to 1,200 mm
    Weight up to 10.000 kg

     

     

    [Translate to English:] Geschmiedete Hohlstäbe, Zylinder
               

    Forged rings

    Outer diameter up to 2.400 mm
    Height up to 2.200 mm
    Weight up to 25.000 kg

    [Translate to English:] Geschmiedete Ringe
               

    Seamless rolled rings

    Outer diameter up to 3.500 mm
    Height up to 800 mm
    Weight 10 kg to 8.000 kg

    [Translate to English:] Nahtlos gewalzte Ringe
              

    We can also produce according to clients' designs. If you have your own design, just feel free to contact us.

  • Previous:
  • Next:



  • Air Turbine Spindles® face milling Carbon Metal at 10,000 mm for each moment (394 IPM). 50,000 rpm 625XDT immediately loading on Robodrill at Uno Company, Japan

    The 625X is a immediate generate governed spindle which maintains continuous velocity and torque underneath cutting load.

    This spindle’s patented mechanism has only two shifting elements – the continuous velocity turbine an bearing sets.
    – for extremely lower vibration and warmth. Air Turbine Spindles® do not thermally broaden and are super specific.
    HSC gives you a super completed excellent and extends cutting device life.

    In addition immediate generate results in wonderful dependability because there are no vanes gears or Significant Frequency brushes to wear and burn up out.
    No lubrication or regulate process necessary — just induce dry clean 6.two Bar 90 PSI air.

    Simply call 561 994 0500 for a demonstration.



    Unit Cell The structure of solids can be described as if they were three-dimensional analogs of a piece of wallpaper. Wallpaper has a regular repeating design …

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag