High Efficiency Factory D2 Tool Steel | 1.2379 | X153CrMo12 | SKD11 Factory in Benin
1. Relevant D2 Steel Specifications Country USA German Japan Standard ASTM A681 DIN EN ISO 4957 JIS G4404 Grades D2 1.2379/X153CrMo12 SKD11 2. D2 Tool Steel Chemical Composition ASTM A681 C Mn P S Si Cr V Mo D2 1.4 1.6 0.1 0.6 0.03 0.03 0.1 0.6 11 13 0.5 1.1 0.7 1.2 DIN ISO 4957 C Mn P S Si Cr V Mo 1.2379/X153CrMo12 1.45 1.6 0.2 0.6 0.03 0.03 0.15 1.6 11 13 0.7 1 0.7 1 JIS G4404 C Mn P S Si Cr V Mo SKD11 1.4 1.6 0.6 0.03 0.03 0.4 11 13 0.2 0.5 0.8 1.2 3. AISI Grade...
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for High Efficiency Factory D2 Tool Steel | 1.2379 | X153CrMo12 | SKD11 Factory in Benin, If you are interested in any of our products and services, please don't hesitate to contact us. We are ready to reply you within 24 hours after receipt of your request and to create mutual un-limited benefits and business in near future.
1. Relevant D2 Steel Specifications
|Standard||ASTM A681||DIN EN ISO 4957||JIS G4404|
2. D2 Tool Steel Chemical Composition
|DIN ISO 4957||C||Mn||P||S||Si||Cr||V||Mo|
3. AISI Grade D2 Steel Mechanical Properties
|Hardness, Knoop (converted from Rockwell C hardness)||769||769|
|Hardness, Rockwell C||62||62|
|Izod impact unnotched||77.0 J||56.8 ft-lb|
|Elastic modulus||190-210 GPa||27557-30457 ksi|
|Thermal expansion||10.4 x 10-6/ºC||20-100||
4. AISI/ASTM A681 D2 Grade Steel Forging
Heating for forging of AISI D2 tool steel should
be done slowly and uniformly. Soak through at 1850°-1950°F and reheat as often
as necessary, stopping work when the temperature drops below 1700°F(926℃). After D2
die steel forging, cool slowly in lime, mica, dry ashes or furnace. AISI D2 steel
should always be annealed after forging.
5. D2 Tool Steel Heat Treatment
ASTM D2 steels alloy should be preheated very slowly to 815oC (1500oF) and then temperature can be increased to 1010oC (1850oF). They are then held at 1010oC (1850oF) for 20 to 45 minutes and air cooled (air quenched).
Annealing of D2 tool steels material should be done at 871 to 898oC (1600 to 1650oF) followed by slow furnace cooling at 4.4oC (40oF) per hour or less.after which cooling rate may be increased. Suitable precautions must be taken to prevent excessive carburization or decarburization.
When desirable to relieve the strains of machining, heat D2 grade steel slowly to 1050°-1250°F, allow to equalize, and then cool in still air (Strain Relieving).
Preheat Prior To Hardening
Preheat slowly to 1350°-1450°F and hold at this temperature until grade steel D2 material is uniformly heated.
After thorough preheating, heat to 1800°-1850°F. Hold the work piece at the hardening temperature until it is completely and uniformly heated.
AISI D2 steel tool material is an air hardening steel and will develop hardness on cooling in still air. To avoid scaling and prevent decarburization of the work piece surface, controlled atmosphere or vacuum furnaces are recommended. If these furnaces are not available, pack hardening, salt baths or wrapping the piece in stainless steel foil will provide some degree of surface protection in the hardening process. Parts should be allowed to cool to 150F, or to where they can be held in the bare hand, and then temper immediately.
The tempering temperature on material D2 steel may be varied according to the desired hardness. D2 steels can be tempered at 204oC (400oF) for achieving Rockwell C hardness of 61 and at 537oC (1000oF) for a Rockwell C hardness of 54.
6. D2 Tool Steel Material Application
AISI grade D2 tool steels are used for long run tooling applications, where wear resistance is important, such as blanking or forming dies and thread rolling dies.
Some main applications for D2 tool steel are as below:
Blanking Dies, Forming Dies, Coining Dies, Slitting Cutters, Heading Tools, Long Punches, Forming Rolls, Edging Rolls, Master Tools, Beading Rolls, Intricate Punches, Extrusion Dies, Drawing Dies, Lamination Dies, Thread Rolling Dies, Shear Blades, Burnishing Tools, Gauges, Knurls, Wear Parts.
We usually hold D2 tool steel on sale activities, and you would have our price on regular schedule. Contact us and sign in our newsletter to have D2 tool steel materials price list and commercial quote today.
www.metalcraftusa.com Metal Bending Tools and Stampings. This video shows a circle formed out of flat metal strip using the Metalcraft Practical Rolling Bending Riveting tool.
TCM BALER：http://www.tcmbaler.com/ a professional manufacturer, specialize in hydraulic compressing machine/ baling press compactor/pressing baler for more than 15years, Our products are applicable for waste cardboard/ cardbox, OCC, plastic bottles ,fiber, rags,wipers,used clothes/clothing,textiles, cotton, newspaper, kraft paper, scrap metal, mattress spring, scrap car body, heavy steel etc. plays a big role in recycling industry, welcomed by domestic and national customers.
1.Fully automatic horizontal baling press
2.Semi-automatic horizontal baling press
3.vertical baling press baler
4.wipers/rags bagging press baler
5.scrap metal baling compactor
6.shearing baler machine
8.movable scrap metal baler compactor
9.single shaft shredder
10.double shaft shredder
Tel: 0086 -21-61522014
Hydraulic Automatic Alligator Shearing Machine, Hydraulic Albania, Scrap Metal Machine, Hydraulic Automatic Alligator Shearing Machine, Wholesale Various High Quality Hydraulic Automatic Alligator Shearing Machine Products from Global Hydraulic Automatic, Metal Cutting Shears, Alligator Shears Moley Magnetics, Inc. Bulgaria, Scrap Metal Shears For Sale, Moley Alligator Shears. Easy to operate and service. Bolts and bushings made from alloy steel, tempered rectified. Working pressures up to 300 bar., Metal Cutting Machine, Automatic shears All industrial manufacturers Videos Canada, Cutting Machine For Metal, Find all the manufacturers of automatic shears and contact them directly on DirectIndustry. alligator shear hydraulic automatic scrap steel PowerBird, Alligator Scrap Metal Shears, Automatic Shears, Automatic Shears Suppliers and Colombia, Container Scrap Shear, Tags: Automatic Alligator Hydraulic Shear For Scrap Copper. View larger image. Add to Compare. automatic shearing and bending machine. Nantong Liwang Machine Tool, Metal Scrap Automatic Shear, Hydraulic Alligator Shears, Alan Ross Machinery Denmark, Good Hydraulic Metal Alligator Shear, An alligator shear is a metal cutting shear with a hinged jaw, powered by a hydraulic cylinder. Alligator shears are generally set up as stand alone shears, however, Alligator Metal Cutting Shear, Alligator shears All industrial manufacturers Videos Dominica, Alligator Rebar Hydraulic Shear, This hydraulic alligator shear is the ideal machine when it The Alligator Shears NPP Series is net Can be connected with diesel enginer All automatic., Scrap Rebar Hydraulic Shear Machine, Deltax New Shear Front Dynaset Hydraulic Ecuador, Metal Crocodile Shear, HYDRAULIC ALLIGATOR SHEARS O Hydraulic no impact shearing with foot controlled cuting stroke. Operator has complete control of cutting cycle. Shear travel can be, Metal Scrap Alligator Shear, Used SHEARS, ALLIGATOR Surplus Record UK, Hot Crocodile Scrap Shear, SHEARS, ALLIGATOR. There are 9 listings 24 Canton #11A, alligator shear, 24 blades, Eaton clutch, 24 McIntyre, hydraulic alligator shear, 126 tons, #12018, hydraulic shear for scrap steel, Hydraulic shears for cutting automotive tires, Alligator Grenada, Crocodile Hydraulic Steel Shearing, Hydraulic shears for cutting All alligator shears are equipped with interchangeable blades Scissors can work in manual and automatic, Shearing Alligator Shape Shearing Machine For Sale, Alligator Scrap Cutting Shears Guynea, Metal Sheet Shearing Machine, Hydraulic Scrap Shear Non Ferrous Specialist. DTX340: Hydraulic alligator shearing machine. Blade Length: 14 340 mm blades 4 sided reversible regrindable, Metal Cutting Shearing Machine, automatic shear Quality Supplier from China Guatemala, Good Manufacturer Alligator Metal Shear, Quality automatic shear supplier on sales from automatic shear manufacturer find China automatic shear factory, suppliers from Jiangyin Longlonghui Trade Co., Ltd., Alligator Shear Machine Steel Cutter, McIntyre 640 Alligator Shear JMC Recycling Israel, Scrap Metal Automatic Cutter, Product Description. The McIntyre 640 Alligator shear is a powerful hydraulic yard metal shear which is guaranteed to be an asset to your operation for years to come., Scrap Metal Container Shear, Used Recycling Machinery Equipment Italy, Horizontal Scrap Container Metal Shear, Used Recycling Machinery. This Arnold SP100 used metal baler is an automatic machine Heres a new generation hydraulic alligator shear which is faster, Automatic Container Shear, Used Alligator Shears for sale. Acme and more. Jordan, Hydraulic Drive Container Scrap Metal Shear, Search 45 listings for used alligator shears. Find Acme, Krupp, Manitou, Redrock for sale on Machinio., Hydraulic Metal Crocodile Shear, Used CONSTELLATION HYDRAULIC ALLIGATOR SHEAR Korea, Aluminum Composite Panel Horizontal Hydraulic Metal Shear, #2 1 2 24 CONSTELLATION HYDRAULIC ALLIGATOR SHEAR Serial No 7301, Model 2 1 2 24 . EQUIPPED WITH: