High Definition For L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 Wholesale to Hongkong

High Definition For
 L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 Wholesale to Hongkong

Short Description:

In ASTM A681 standard, L6 steel grade is in L-type for special purpose tool steels. AISI L6 tool steel is in the general class of alloy, oil-hardening tool steel that is characterized by good toughness. ASTM L6 tool steel is suitable for use as tools, dies, and machine parts, which require a good combination of hardness and toughness. Due to its lower carbon content and relatively high nickel content, L6 tool steel has slightly better shock-resistance than more highly alloyed types and shoul...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We always stick to the principle "Quality First, Prestige Supreme". We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for High Definition For L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 Wholesale to Hongkong, We cordially welcome customers from at home and abroad to join us and cooperate with us to enjoy a better future.


    In ASTM A681 standard, L6 steel grade is in L-type for special purpose tool steels. AISI L6 tool steel
    is in the general class of alloy, oil-hardening tool steel that is
    characterized by good toughness. ASTM L6 tool steel is suitable for use
    as tools, dies, and machine parts, which require a good combination of
    hardness and toughness.

    Due to its lower carbon content and
    relatively high nickel content, L6 tool steel has slightly better
    shock-resistance than more highly alloyed types and should be used where
    some wear-resistance can be sacrificed for increased toughness.

    1. Relevant Steel Specification of L6 Tool Steel

    Country USA German Japan British
    Standard ASTM A681 DIN EN ISO 4957 JIS G4404 BS 4659
    Grades L6/T61206 1.2714/55NiCrMoV7 SKT4 BH224/5

    2. AISI L6 Steel Chemical Composition and Steel Equivalents

    ASTM A681 C Mn P S Si Cr V Mo Ni
    L6/T61206 0.65 0.75 0.25 0.80 0.03 0.03 0.10 0.50 0.60 1.20 . . . . . . . . . 0.50 1.25 2.00
    DIN ISO 4957 C Mn P S Si Cr V Mo Ni
    1.2714/55NiCrMoV7 0.50 0.60 0.60 0.90 0.03 0.02 0.10 0.40 0.80 1.20 0.05 0.15 0.35 0.55 1.50 1.80
    JIS G4404 C Mn P S Si Cr V Mo Ni
    SKT4 0.50 0.60 0.60 0.90 0.03 0.02 0.10 0.40 0.80 1.20 0.05 0.15 0.35 0.55 1.50 1.80
    BS 4659 C Mn P S Si Cr V Mo Ni
    BH224/5 0.49 0.57 0.70 1.00 0.03 0.025 . . . 0.35 0.70 1.10 . . . . . . 0.25 0.40 1.25 1.80

    3. ASTM L6 Tool Steel Mechanical Properties

    Steel L6 Physical Properties

    • Modulus of elasticity [103 x N/mm2]: 215

    • Density [g/cm3]: 7.84

    • Thermal conductivity [W/m.K]: 36.0

    • Electric resistivity [Ohm mm2/m]: 0.30

    • Specific heat capacity[J/g.K]: 0.46

    Mechanical Properties of L6 Steels

    Properties Metric Imperial
    Poisson’s ratio 0.27- 0.30 0.27- 0.30
    Elastic modulus 190-210 GPa 27557-30457 ksi

    4. Forging of L6 Tool Steel

    Forge at 1079°C (1975 F) down to 871°C (1600 F). Do not forge below 843°C (1550 F).

    5. AISI L6 Tool Steel Heat Treatment

    Hardening

    Preheating:
    Heat steel L6 at a rate not exceeding 204°C (400°F) per hour (222°C per
    hour) to 621-677°C (1150-1250°F) and equalize. Soak for 30 minutes for
    the first inch (25.4 mm) of thickness, plus 15 minutes for each
    additional inch (25.4 mm).

    Quenching

    Quench L6 tool steel in oil to 66-51°C (150-125°F).

    Tempering

    Temper
    L6 steels immediately after quenching. Hold at temperature for 1 hour
    per inch (25.4 mm) of thickness when tempering at 204°C (400°F), 4 hours
    minimum, then air cool to ambient temperature.
    However, where increased toughness is desired, at a sacrifice of some hardness, higher tempering temperatures are often used.

    AISI L6 steel does not become brittle, as many other die steels do, when tempered in the range of 232°C to 426°C (450 to 800°F).

    To
    minimize the possibility of cracking, the steel should be tempered
    immediately after hardening and should be heated slowly to the desired
    tempering temperature.

    Annealing

    Annealing of steel L6 must be performed after hot working and before re-hardening.

    Heat
    to 760°C (1400°F) and hold one hour per inch of maximum thickness. Then
    cool slowly with the furnace at a rate not exceeding 28°C per hour(50°F
    per hour) to 538°C (1000°F). Continue cooling to ambient temperature in
    the furnace or in air.

    For improved machinability, hold at 760°C
    (1400°F) for 1 hour per inch (25.4mm) of maximum thickness; 2 hours
    minimum. Then cool slowly with the furnace cool from 677°C (1250°F) to
    760°C (1400°F), hold for 8 hours, then air cool to ambient temperature.

    Because of its air-hardening ability, steel L6 should not be normalized.

    6. Machinability of Steel L6

    Machinability
    of tool steel L6 is very good. It rates 90% of the machinability of the
    W-group water hardening low alloy steels rated 100% as a baseline.

    7. Applications of ASTM A681 L6 Tool Steel

    AISI
    L6 cold working tool steel is for general purpose tools and dies where
    greater toughness is required, but with some sacrifice of
    abrasion-resistance.

    Typically used below applications:

    • spindles,

    • forming rolls,

    • punches,

    • blanking and forming dies,

    • trimmer dies,

    • clutch parts,

    • pawls,

    • bearings,

    • chucks parts,

    • rollers,

    • knuckle pins,

    • clutch pins,

    • shear blades

  • Previous:
  • Next:



  • Julien Baker Live at Brooklyn Steel, Brooklyn, NY, USA [17 April,2017]
    LIVE ON : http://ow.ly/Huvz30alqfb
    Check out how to watch the special concert on your computer or mobile device.
    Concert zone site will air an Julien Baker special show perfomance at Brooklyn Steel, Brooklyn, NY, USA
    You must logged in to continue streaming. (Live stream will be available after Login)
    Subscribe My Channel

    Julien Baker Brooklyn Steel, Brooklyn, NY, USA 17 April,2017
    Julien Baker review and setlist
    Watch Julien Baker in Brooklyn Steel, Brooklyn, NY, USA Live stream airs Tonight Online
    Julien Baker Concert in Brooklyn Steel, Brooklyn, NY, USA 2017
    Missed Julien Baker Concert ??, Is now available to stream full
    Exclusive Julien Baker LIVE 2017 – Show – Live at Brooklyn Steel, Brooklyn, NY, USA
    Julien Baker LIVE 2017 Brooklyn Steel, Brooklyn, NY, USA 17 April,2017 at Brooklyn Steel, Brooklyn, NY, USA
    Global Superstar Julien Baker Will visit Brooklyn Steel, Brooklyn, NY, USA For The Tour Concert in 17 April,2017
    Watch Julien Baker Live 2017 Streaming at Brooklyn Steel, Brooklyn, NY, USA for 17 April,2017
    Julien Baker Ticket now available on ConcertZone, Worlds largest live streaming concert online
    Live ConcertZone can now confirm that Julien Baker will concert at Brooklyn Steel, Brooklyn, NY, USA for 17 April,2017
    Get The Julien Baker setlist of the concert at Brooklyn Steel, Brooklyn, NY, USA on 17 April,2017

    Facebook: https://www.facebook.com/
    Twitter: https://twitter.com/
    Instagram: http://instagram.com/
    ====================================
    En Vivo | Ao Vivo | In Direct
    ———-THanks you—————



    WEEBASS รอกหยดน้ำ HARRIER หมุนขวา Orange
    ข้อมูลทั้งหมด : http://p2b.us/1d9p5y

    คุณกำลังต้องการ WEEBASS รอกหยดน้ำ HARRIER หมุนขวา Orange เพื่อช่วยแก้ไขปัญหา อยูใช่หรือไม่ ถ้าใช่คุณมาถูกที่แล้ว เรามีสินค้า ที่ท่านต้องการแนะนำ พร้อมมีแหล่งซื้อ สินค้าราคาถูก แนะนำให้ท่าน WEEBASS รอกหยดน้ำ HARRIER หมุนขวา Orange ราคาถูกให้กับคุณ

    Product details of WEEBASS รอกหยดน้ำ HARRIER หมุนขวา Orange HARRIER ampnbspรอกทรงหยดนํ้าราคาย่อมเยาว์ ampnbspจาก WEEBASS เป็นรอกหยดนํ้าอัตราทด 7.0:1ที่มีพละกำลังในการหยุดปลา กำลังเบรคถึง 7kg บอดี้กราไฟท์ ลูกปืน สเตนเลส 4 1 ball bearing ระบบขับเคลื่อนชุดเฟืองภายใน ใช้ระบบชุดเฟืองทองเหลืองแท้ 100% จึงทำให้มีความแข็งแรง สามารถต่อกรกับเหล่านักล่าใต้นํ้าใด้อย่างมีประสิทธิภาพ สินค้ามีการรับประกันจากทางบริษัท รับประกันอะไหล่ชุดเฟื่องภายใน ฟรีนานถึง 1ปีเต็ม HARRIER WEEBASS affordable bait casting waterdrop-shape reel with graphite body brass gear set 7.0:1 gear ratio 4 1 stainless steel ball bearing 7 kg drag capacity light weight at only 220 gr. is your companion in coping with any predator fish. ampnbspEnsure your confidence with our 1-year warranty.ampnbsp ข้อมูลจำเพาะของ WEEBASS รอกหยดน้ำ HARRIER หมุนขวา Orange รายการสินค้าในกล่อง รอกหยดน้ำ WEEBASS HARRIER หมุนขวา สีส้ม คุณสมบัติทั่วไป �ซื้อของออนไลน์ ผ่านเว็บไซต์ ของแท้ ของดี มีคุณภาพ ส่งจริง ส่งเร็ว เก็บเงินปลายทางWE521SPAA4JAHBANTH-9751549 โมเดล P.Pel P.Pra-PP.084.2 Size (cm) 12 x 7.5 x 4 Weight (kg) 220 Ball type กลางแจ้ง Warranty period 1 ปี Warranty type มีการรับประกัน…

    หมวดหมู่ Fishing
    ราคา 1650 บาท ถูกที่สุด

    สั่งซื้อพร้อมส่วนลด เก็บเงินปลายทาง http://p2b.us/1d9p5y
    ———————————————————————————-
    คำค้นหา : WEEBASS, รอก, หยดน้ำ, HARRIER, หมุน, ขวา, Orange, WEEBASS รอกหยดน้ำ HARRIER หมุนขวา Orange

    WEEBASS #รอก #หยดน้ำ #HARRIER #หมุน #ขวา #Orange #WEEBASS รอกหยดน้ำ HARRIER หมุนขวา Orange

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag