C45 Zagaye Bar | Aisi 1045 | DIN 1,1191 | Jis S45C

C45 Zagaye Bar |  Aisi 1045 |  DIN 1,1191 |  Jis S45C

Short Description:

Karfe C45 Zagaye Bar ne unalloyed matsakaici carbon karfe, wanda shi ne ma a general carbon injiniya karfe. C45 ne matsakaici ƙarfi karfe da kyau machinability da kyau kwarai tensile Properties. C45 zagaye karfe ne kullum kawota a cikin baki zafi birgima ko lokaci-lokaci a bisa al'ada yanayin, tare da hankula tensile ƙarfin kewayon 570 - 700 Mpa da Brinell taurin kewayon 170 - 210 a ko dai yanayin. Yana ba duk da amsa mai gamsarwa a ga nitriding saboda wani rashin suita ...


  • Length: 3-5.8mm ko gyare-gyare
  • Surface: black, peeled, ko m juya
  • Heat jiyya: iska-sanyaya, bisa al'ada, annealed, Q & T
  • Smelting tsari: EAF + LF + VD
  • samfurin Detail

    samfurin Tags

    Karfe C45 Zagaye Bar  ne
    wani unalloyed matsakaici carbon karfe, wanda shi ne ma a general carbon
    injiniya karfe. C45 ne matsakaici ƙarfi karfe da kyau
    machinability da kyau kwarai tensile Properties. C45 zagaye karfe ne
    kullum kawota a cikin baki zafi birgima ko lokaci-lokaci a
    bisa al'ada yanayin, tare da hankula tensile ƙarfin kewayon 570 - 700
    Mpa da Brinell taurin kewayon 170 - 210 a ko dai yanayin. Yana bai
    ba duk da amsa mai gamsarwa a ga nitriding saboda wani rashin
    dace alloying abubuwa.

    C45 zagaye mashaya karfe ne daidai da EN8 ko 080M40.
    Karfe C45 mashaya ko farantin da ya dace domin yi na sassan kamar
    giya, kusoshi, janar-manufa axles da shafts, makullin kuma studs.


    1. Supply Range na Karfe C45 Zagaye Bar

    • C45 Karfe Zagaye Bar: diamita 8mm - 3000mm

    • C45 Karfe Plate: kauri 10mm - 1500mm x nisa 200mm - 3000mm

    • C45 Karfe Lebur Bar: 200mm - 1000mm

    • Square C45 Karfe: 20mm-800mm

    • Heksagon Karfe.

    Surface Gama : Black, Kakkausar machined, ya karɓi ko matsayin da ba da bukatun.

    2. Common C45 Karfe Bayani dalla-dalla

    kasar USA Birtaniya Japan Australia
    Standard ASTM A29 EN 10083-2 Jis G4051 AS 1442
    maki 1045 C45 / 1,1191 S45C 1045

    3. C45 Zagaye Bar Karfe Chemical Abun da ke ciki Properties

    Standard Grade C mn P S Si Ni Kr
    ASTM A29 1045 0.43-0.50 0.60-0.90 0,04 0,050  -  -  -
    EN 10083-2 C45 / 1,1191 0.42-0.50 0.50-0.90 0.03 0,035 0,04 0.4 0.4
    Jis G4051 S45C 0.42-0.48 0.60-0.90 0.03 0,035 0.15-0.35  -  -

    4. inji Properties na C45 Zagaye Bar Karfe Material

    • Inji Properties a ta kasu + zafin Yanayin

    Diamita d (mm) Kauri t (mm) 0.2% hujja danniya (N / mm 2) Tensile ƙarfi (N / mm 2) Elongation A 5 (%) Rage Z (%)
    <16 <8 min. 490 700-850 min. 14 min. 35
    <17-40 <8 <= 20 min. 430 650-800 min. 16 min. 40
    <41-100 <20 <= 60 min. 370 630-780 min. 17 min. 45
    Diamita d (mm) Kauri t (mm) 0.2% hujja danniya (N / mm 2) Tensile ƙarfi (N / mm 2) Elongation A 5(%)
    <16 <16 min. 390 min. 620 min. 14
    <17-100 <16 <= 100 min. 305 min. 305 min. 16
    <101-250 <100 <250 min. 275 min. 560 min. 16

    5. Forging na Carbon Karfe C45 Zagaye Bar

    Hot kafa zazzabi: 850-1200oC.

    Pre
    zafi don 750 OC - 800 OC, sa'an nan ci gaba da dumama zuwa 1100 OC - 1200 OC
    matsakaicin, rike har zafin jiki ne uniform a ko'ina cikin sashe, kuma
    fara ƙirƙirãwa nan da nan. Forging ba aiki wanda ake iya yi a kasa 850 OC.
    Gama forgings iya zama iska sanyaya.

    Muna da karfi a kan ƙirƙira karfe C45 zagaye mashaya. Barka da bincike na C45 karfe kayan.

    6. DIN C45 Zagaye Bar Karfe Grade Heat jiyya

    Forging ko zafi mirgina: 1100 - 850 ° C
    maido da:  840 - 880 ° C / iska
    Soft annealing:  680 - 710 ° C / makera
    hardening:  820 - 860 ° C / ruwa, man
    Tempering:  550 - 660 ° C / iska

    7. hardening DIN C45 Karfe hardening

    Taurara daga zazzabi na 820-860oC bi ta ruwa ko mai quenching.

    Heat
    zuwa 820 OC - 850 OC riƙe har zafin jiki ne uniform a ko'ina cikin
    sashe, jiƙa for 10 - 15 minutes da 25mm na sashe, kuma ice a
    ruwa ko brine. ko,

    Heat zuwa 830 OC - 860 OC jiƙa kamar a sama da ice a oil.Temper nan da nan yayin da har yanzu mika dumi.

    Surface taurin for C45 musamman karfe zagaye mashaya bayan harshen wuta ko shigar da hardning:

    • Karfe Name karfe yawan Surface Harndess

    • C45 1,1191 min. 55 HRC

    8. Application na DIN Carbon Karfe C45 Zagaye Bar

    DIN
    C45 zagaye mashaya karfe abu da kuma karfe farantin C45, flats an yadu amfani
    a dukkan masana'antu domin amfani da bukatar karin karfin da ci
    juriya fiye da low carbon m karfe.

    Ta kasu kuma
    baya zafin karfe ga C45 karfe sa zagaye mashaya, karfe farantin,
    lebur da square da ake amfani da axles, kusoshi, ƙirƙira a haɗa da sandunansu,
    crankshafts, torsion sanduna, haske giya, jagora da sandunansu, sukurori, forgings,
    dabaran tayoyin, shafts, sickles , da gatura, wukake, itace aiki drills,
    guduma, da dai sauransu

    Barka da abokan ciniki don bincike DIN C45 zagaye mashaya,
    CK45 / 1,1191 karfe farantin, lebur karfe ga C45 karfe farashin. Mu ne
    masu sana'a maroki, kuma m ga fiye da shekaru 20. Mun bayar da ku
    dukan duniya mafita ga C45 zagaye mashaya karfe.


  • Previous:
  • Next:
  • Aika sakon mana:

    BINCIKE NOW
    • * CAPTCHA: Don Allah ka zaɓa Tree

    related Products

    BINCIKE NOW
    • * CAPTCHA: Don Allah ka zaɓa Car