Good Quality EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory in Los Angeles

Good Quality
 EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory in Los Angeles

Short Description:

EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We always stick to the principle "Quality First, Prestige Supreme". We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for Good Quality EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory in Los Angeles, With a wide range, good quality, reasonable prices and good service, we will be your best business partner. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!


    EN 34CrNiMo6 Steel
    is an important alloy engineering steel grade as per BS EN
    10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
    hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
    resistance to overheating, but the white sensitivity of 34CrNiM06 is
    high. It also has the temper brittleness, so the weldability of
    34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
    temperature preheating before welding in order to eliminate the stress
    after welding processing.

    1.EN Steel 34CrNiMo6 Supply Range

    Round Steel Bar Sizes: diameter 80mm – 1200mm
    Other steel shape and sizes available according to your requirements.

    Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.

    2.EN 34CrNiMo6 Steel Standards And Equivalents

    BS EN 10083 -3: 2006 34CrNiMo6 / 1.6582 ASTM A29: 2004 4337
    BS EN 10250 – 3: 2000

    3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties

    BS EN 10083 – 3:2006 34CrNiMo6
    /1.6582
    C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.025 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    BS EN 10250-3:2000 C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.035 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    ASTM A29: 2004 4337 C Mn Si P S Cr Mo Ni
    0.30-0.40 0.6-0.8 0.20-0.35 0.035 max 0.040 max 0.70-0.90 0.20-0.30 1.65-2.00

    4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel

    Properties < 16 >16 – 40 >40 – 100 >100 – 160 >160 – 250
    Thickness t [mm] < 8 8<t<20 20<t<60 60<t<100 100<t<160
    Yield strength Re [N/mm²] min. 1000 min. 900 min. 800 min. 700 min. 600
    Tensile strength Rm [N/mm2] 1200 – 1400 1100 – 1300 1000 – 1200 900 – 1100 800 – 950
    Elongation A [%] min. 9 min. 10 min. 11 min. 12 min. 13
    Reduction of area Z [%] min. 40 min. 45 min. 50 min. 55 min. 55
    Toughness CVN [J] min. 35 min. 45 min. 45 min. 45 min. 45

    5.Heat Treatment of 34CrNiMo6 Engineering Steel

    Quenched and Tempered (Q+T) of 34CrNiMo6 Steel

    • Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;

    • Soak at this hardening temperature quench in oil;

    • Temper as soon as 34CrNiMo6 steels reach room temperature.

    • Heat uniformly to the suitable temperature;

    • Withdraw from the furnace and cool in the air.

    • The usual tempering temperature is 600°C which depending on the actual requirements.

    6.Forging of DIN 34CrNiMo6 / 1.6582 Steel

    Hot forming temperature: 1100-900oC.

    7.Machinability of Steel 34CrNiMo6

    Machining
    is best done with this 1.6582 alloy steel in the annealed or normalized
    and tempered condition. It can be machined by all conventional methods.

    8.Welding

    The
    alloy materials can be fusion or resistance welded. Preheat and post
    heat weld procedures should be followed when welding this alloy by
    established methods.

    9.Application

    EN DIN
    34CrNiMo6 steel is used to make tools which demands good plasticity and
    high strength. It is usually selected to make the big size and important
    parts, such as heavy machinery axle,turbine shaft blade, high load of
    transmission parts, fasteners, crank shafts, gears, as well as heavily
    loaded parts for motor construction etc.

    Otai Steel is reliable to
    supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
    Please tell us your detailed requirements and have the best offer soon.

  • Previous:
  • Next:



  • http://www.merlinmotorsport.co.uk/FASTENERS-&-CATCHES-AeroCatch/c51_249/index.html AeroCatch Bonnet Pins are a shear pin latch system providing a modern solution to panel fastening. Each AeroCatch fastener can be top or side mounted to the panel, features adjustable strike, corrosion resistant, lightweight high strength construction and optional key for added security.



    Email: info@goldenlaser.org / www.goldenlaser.org / www.vtopfiber.com / www.golden-laser.com.cn / whatsapp(tel):+86-15071258391 / skype: goldenlaser-jaenymay

    Golden Laser Pipe Laser Cutting Machine Objectives
    Presenting the highest cost effectiveness tube cutting machine for global customers.Focus on professional applications.

    Fiber laser cutting tube / pipe cutting machine P2060A features
    ♦ Can cut lines and holes with different diameters from different directions on the pipe,and meet centrifugal and non-centrifugal vertical intersection condition for branch and main pipe axis.
    ♦ Can cut column Crossed Lines at the end of branch pipe,and meet centrifugal non-centrifugal vertical intersection condition for branch and main pipe axis.
    ♦ Can cut inclined with the main circular pipe.
    ♦ Can cut branch pipe intersected with the main circular pipe.
    ♦ To realized angel groove face,square hole,waist-shaped holes cutting.
    ♦ Fully automatic CNC laser tube cutting machine, which utilizes an automatic loader and unloader allowing this machine to run continuously with minimal operator involvement.

    A. Fiber Laser Tube Cutting Machine Applicable Materials
    Stainless steel,carbon steel,mild steel,aluminum,brass,copper,alloy metal materials etc.

    B. Laser Pipe Cutting Machine Applicable Industries
    ®Furniture
    Chairs, Metal Tables legs, Chair legs,Cots, Cabinet, TV Stands, TV Antennas,Doors,stainless steel table legs, Bed Frames
    ®Automobile
    Handle Bar,Steering Column,Main Beam,Bottom Chassis…
    ®Transformer
    Elliptical and Round Cooling Tubes
    ®Construction
    Scaffoldings & Supporting pipes
    ®Bicycle
    Handle Bar, Top Tube, Bottom Tube, Down Tube, Chain Stay, Back Stay, Stem Tube, Pedail Tube, Seat Pillar, Fork Blade.
    ®General Engineering
    Bus body structures, main beam for pedestal lfans,textile,Frames…
    ® Oil Industry
    Perforating gun tube
    ® Medical Device
    ® Fire Control

    C. Cutting standard types of pipe :
    Round pipe, square tube, OB, D type tube, triangular tube, oval tube
    Such as size through the abnormity tube
    At the same time, flex3d have profile cutting function module, can cut Angle steel, channel steel, H steel etc.

    Automatic Bundle Loader Fiber Laser Metal Tube Cutting Machine Technical Parameters
    Model Number: P2060A / P3080A / P30120
    Tube length: 6000mm / 8000mm / 12000mm
    Tube diameter: 20-200mm / 20-300mm
    Laser source : IPG /N -light fiber laser resonator
    Laser head: Raytools laser cutting head
    Servo Motor: 4 servo motors for all axial movements
    Laser source power: 700w / 1000w / 2000w / 3000w
    Position accuracy: ±0.03mm
    Repeat position accuracy: ±0.01mm
    Maximum position speed: 70m/min
    Acceleration: 1G
    Cutting speed: depend on material, laser source power
    Electric power supply: AC380V 50/60Hz

    Buying Guides
    1.What metal materials do u need to cut ? what’s the max tubelength,tube diameter and tube wall thickness?
    2.What industry do u do ? and what’s the final cutting product?
    3.Kindly leave the message of ur e-mail address,company name ?

    After confirmed above questions,then we can recommend u with the suitable laser power for u.

    Wuhan Golden Laser Co.,Ltd (Stock number: 300220)
    Attn: Ms Jaeny May
    E-mail: info@goldenlaser.org | info@vtoplaser.com
    WhatsApp: +86-15071258391
    Skype: goldenlaser-jaenymay
    Website: http://www.goldenlaser.org | http://www.vtopfiber.com | http://goo.gl/ekpXTm
    YouTube: http://www.youtube.com/user/Goldenlaservideos
    Facebook: http://www.facebook.com/metallasercuttingmachine

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck