Free sample for C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Factory for Rwanda

Free sample for
 C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Factory for Rwanda

Short Description:

Steel C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either condition. It does not however respond satisfactorily to nitriding due to a lack of suita...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Free sample for C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Factory for Rwanda, we have built a reliable reputation among many customers. Quality&customer first are always our constant pursuit. We spare no efforts to make better products. Look forward to long-term cooperation and mutual benefits!


    Steel C45 Round Bar is
    an unalloyed medium carbon steel, which is also a general carbon
    engineering steel. C45 is a medium strength steel with good
    machinability and excellent tensile properties. C45 round steel is
    generally supplied in the black hot rolled or occasionally in the
    normalised condition, with a typical tensile strength range 570 – 700
    Mpa and Brinell hardness range 170 – 210 in either condition. It does
    not however respond satisfactorily to nitriding due to a lack of
    suitable alloying elements.

    C45 round bar steel is equivalent to EN8 or 080M40.
    Steel C45 bar or plate is suitable for the manufacture of parts such as
    gears, bolts, general-purpose axles and shafts, keys and studs.

    1. Supply Range of Steel C45 Round Bar

    • C45 Steel Round Bar: diameter 8mm – 3000mm

    • C45 Steel Plate: thickness 10mm – 1500mm  x width 200mm – 3000mm

    • C45 Steel Flat Bar: 200mm – 1000mm

    • Square C45 Steel: 20mm-800mm

    • Hexagon Steel.

    Surface Finish: Black, Rough Machined, Turned or as per given requirements.

    2. Common C45 Steel Specifications

    Country USA British Japan Australia
    Standard ASTM A29 EN 10083-2 JIS G4051 AS 1442
    Grades 1045 C45/1.1191 S45C 1045

    3. C45 Round Bar Steel Chemical Composition Properties

    Standard Grade C Mn P S Si Ni Cr
    ASTM A29 1045 0.43-0.50 0.60-0.90 0.04 0.050  -  -  -
    EN 10083-2 C45/1.1191 0.42-0.50 0.50-0.90 0.03 0.035 0.04 0.4 0.4
    JIS G4051 S45C 0.42-0.48 0.60-0.90 0.03 0.035 0.15-0.35  -  -

    4. Mechanical Properties of C45 Round Bar Steel Material

    • Mechanical Properties in Quenched+Tempered Condition

    Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5 (%) Reduction Z (%)
    <16 <8 min. 490 700-850 min. 14 min. 35
    <17-40 <8<=20 min. 430 650-800 min. 16 min. 40
    <41-100 <20<=60 min. 370 630-780 min. 17 min. 45
    Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5(%)
    <16 <16 min. 390 min. 620 min. 14
    <17-100 <16<=100 min. 305 min. 305 min. 16
    <101-250 <100<250 min. 275 min. 560 min. 16

    5. Forging of Carbon Steel C45 Round Bar

    Hot forming temperature: 850-1200oC.

    Pre
    heat to 750 oC – 800 oC, then continue heating to 1100 oC – 1200 oC
    maximum, hold until temperature is uniform throughout the section and
    commence forging immediately. Forging is not workable below 850 oC.
    Finished forgings could be air cooled.

    We are strong on forged steel C45 round bar. Welcome enquiry of C45 steel materials.

    6. DIN C45 Round Bar Steel Grade Heat Treatment

    Forging or hot rolling: 1100 – 850°C
    Normalising:  840 – 880°C/air
    Soft annealing:  680 – 710°C/furnace
    Hardening:  820 – 860°C/water, oil
    Tempering:  550 – 660°C/air

    7. Hardening of DIN C45 Steel Hardening

    Harden from a temperature of 820-860oC followed by water or oil quenching.

    Heat
    to 820 oC – 850 oC hold until temperature is uniform throughout the
    section, soak for 10 – 15 minutes per 25mm of section, and quench in
    water or brine. Or,

    Heat to 830 oC – 860 oC soak as above and quench in oil.Temper immediately while still hand warm.

    Surface hardness for C45 special steel round bar after flame or induction hardning:

    • Steel Name       Steel number          Surface Harndess

    • C45                        1.1191                        min. 55 HRC

    8. Application of DIN Carbon Steel C45 Round Bar

    DIN
    C45 round bar steel material and steel plate C45, flats are widely used
    in all industry for uses which require more strength and wear
    resistance than the low carbon mild steel.

    Quenched and
    subsequently tempered steel for C45 steel grade round bar, steel plate,
    flat and square is used for axles, bolts, forged connecting rods,
    crankshafts, torsion bars, light gears, guide rods, screws, forgings,
    wheel tyres, shafts, sickles, axes, knives, wood working drills,
    hammers, etc.

    Welcome customers to inquiry DIN C45 round bar,
    CK45/1.1191 steel plate, flat steel for C45 steel price. We are
    professional supplier and exporter for more than 20 years. We offer you
    worldwide solution for C45 round bar steel.

  • Previous:
  • Next:



  • HIGH SECURITY CYLINDERS

    “DESMODROMIC” CONCEPT
    The mechanism of the cylinder is based on a forced pathway concept. In the absence of the key the combination tumblers are in a random position, any movement or vibration of the cylinder can cause displacement of the tumblers in an unforeseen manner.
    The encoding of the key corresponds to the shape of the track obtained on the key. When the key is inserted into the cylinder,
    the tumblers are in the only allowed position that corresponds to the encoding of the key. The so called “bumping” technique (widespread system of illegal opening of the cylinders) is not applied to the NEW POWER and D-UP cylinder, thanks to the tested and certified desmodromic encryption system.

    REVERSIBLE KEY
    “Reversible” key means that the 2 sides of the key are equally operational, therefore the user must not look for a given direction to insert the key in the cylinder.

    NON DESTRUCTIVE SECURITY AGAINST TAMPERING
    The cylinder is fitted with recognition mechanism and block of the fake key. In case an especially modified key is inserted in the cylinder, such key is recognized and captured, i.e. it gets blocked in the cylinder.

    DRILL-PROOF PROTECTION AND KEY PROFILES CONTROL
    The drill-proof protection is guaranteed by 2 elements, being a ball and a pin made out of hardened steel, the half moon shaped plate protects the tumblers and also works as control of the key profile.

    HOUSEBREAK-IN RESISTANCE
    The New Power and D-Up cylinders is equipped with modules linking bar, made of steel alloy, it ensures a high resistance in the event of the cylinder being forced.

    CYLINDER DUPLICATION SYSTEM
    CC – CENTRAL KEY
    KA – EQUAL KEYS
    MK – MASTER KEY
    GMK – GROUP MASTER KEY
    DOUBLE LIFE
    CYLINDER WITH SINGLE SITE KEY
    CYLINDER WITH MULTIPLE SITE KEY

    CONTROLLED DUPLICATION, GUARANTEED SECURITY
    Protected, controlled key profile by Dierre S.p.a.

    CLASSIFICATION EN1303:2005
    Durability 6 (max.6)
    Attack resistance 2 (max.2)
    Security 6 (max.6)
    Corrosion resistance C (max.C)
    Fire resistance 1 (max.1)

    These cylinders are certified by CNPP (French laboratory) and achieved the A2P** level

    ANTIBUMPING CYLINDERS
    ANTIPICKING CYLINDERS

    DIERRE THE ITALIAN STYLE DOOR
    Visit our website: www.dierre.com



    H13 is one of our most advantageous steel materials here in Songshun, take a look at our last week’s shipment to Iran. to get to a price list of H13, Go to http://www.mysongshun.com/product/h-13-tool-steel/

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House