Free sample for BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Factory from Wellington
BS EN 42crmo4 Alloy Steel is a common chromium-molybdenum steel that usually used after quenchedand tempered, with high intensity, high hardenability. BS EN 42CrMo4round steel has better performance than 34CrMo4 steel due to the carbonand chromium content is higher. 42CrMo4 alloy steel has higher strength and hardenability. The 42CrMo4 alloy material alsohas high fatigue strength and good low-temperature impact toughness. The temper brittleness is not obvious. Although 42CrMo4 steel is mo...
We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for Free sample for BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Factory from Wellington, We fully welcome customers from all over the world to establish stable and mutually beneficial business relationships, to have a bright future together.
BS ENAlloy Steel
is a common chromium-molybdenum steel that usually used after quenched
and tempered, with high intensity, high hardenability. BS EN 42CrMo4
round steel has better performance than 34CrMo4 steel due to the carbon
and chromium content is higher.
has higher strength and hardenability. The 42CrMo4 alloy material also
has high fatigue strength and good low-temperature impact toughness. The
temper brittleness is not obvious.
Although 42CrMo4 steel is more expensive than 41Cr4 steel, it is more
preferable in terms of material properties. EN 42CrMo4 alloy
engineering steel materials have been widely used in automotive driving
elements. Otai Steel is able to supply you prime quality of 42CrMo4
alloy steel materials with wide range.
1.42CrMo4 Alloy Steel Supply Range
42CrMo4 Round bar Sizes: 80mm – 1200mm
Steel 42CrMo4 Flat and Plate: 10mm-1500mm thickness x 200-3000mm width
Other steel shape and sizes available according to your requirements.
Surface condition: Black, rough machined, peeled, turned or other requirements according to your requirements.
2.BS EN 42CrMo4 Alloy Steel Relevant Specifications and Equivalents
|BS EN 10250||Material No.||DIN||-3-1991||BS 970-1955||AS 1444||AFNOR|
3.42CrMo4 Alloy Steel Chemical Composition
|0.38-0.45||0.60-0.90||0.40 max||0.035 max||0.035 max||0.90-1.20||0.15-0.30|
4. DIN 42CrMo4 Alloy Steel Mechanical Properties
|Size Ø mm||Yield stress
|Ultimate tensile Stress,
KV, Joule, min.
|<40||750||1000-1200||11||295-355||35 at 20ºC|
|40-95||650||900-1100||12||265-325||35 at 20ºC|
|>95||550||800-950||13||235-295||35 at 20ºC|
5. Heat Treatment of 42CrMo4 Steels
Annealing of 42CrMo4 Steels
Heat steel 42CrMo4 forged steel slowly and thoroughly to 800-850°C;
Cool slowly in the furnace to the temperature 480°;
Complete annealing the steel in the air.
Quenched and Tempered (Q+T)
Heat 42CrMo4 steel slowly to 880°C;
Soak at this temperature then quench in oil;
Temper as soon as 42CrMo4 steel reach room temperature (20°C);
Heat uniformly to the suitable temperature of 560°C;
Withdraw the 42CrMo4 material from the furnace and cool in the air.
6. Forging of 42CrMo4 Alloy Steel
Preheat 42CrMo4 engineering steel uniformly and slowly;
Increase the forging temperature up to 1150-1200°C.
Always keep the forging temperature above at least 850°C
steel 42CrMo4 has only limited weldability. Preheating to 200-300°C is
strongly recommended; the upper limit should not be exceeded because of
risk for deterioration of the chrome layer.
Alloy steel 42CrMo4
can be friction welded. However, precautions are necessary so as to
limit the formation of undesirable microstructures in the welded zone.
8.Application of 42CrMo4 Alloy Steels
42CrMo4 alloy steel is widely used for engineering steel purpose, such
as: making various kinds of machinery, automobile, mining spare part,
the gearwheel of the engine, the driving gear of supercharger, the
connecting rob, the pinchock under the high pressure, parts for power
train applications, cold formed fastener components, shafts, gears,
drill collars for the oil exploration, etc.
From the album, “Clasificación C, Vol. 1″. Available Now!
Google Play: http://tinyurl.com/oczqaft
Official music video by C-Kan performing Un Par De Balas. 2014 Mastered Trax / C-Mobztas
We tested the Mora Robust to it’s limits! is it robust? Watch to find out!
I got mine here:
Armadillo Merino Clothing:
Get 10% off with this coupon code!! : DBK2017-10
Jeff Kaale – One for the good times
The Mora Robust is (obviously) a robust fixed knife. The blade is thicker than that of other Mora knives, so it can be used for heavy duty. The rubber handle is ergonomically shaped and offers good grip.
Because the blade is made of carbon steel it is important to maintain the blade properly. Carbon steel is not stainless and should therefore be stored clean and dry.
The plastic sheath is pretty solid and holds the knife tightly. The blade clicks inside the sheath and the bottom of the holster has a hole to drain water if needed.
There is a belt clip included to carry the sheath on your belt or to secure it to another sheath. This makes it possible to stack multiple knives from this series on top of each other. Especially useful when you have a serrated knife and want to carry plain edge knife as well. Releasing the sheaths goes really easy by rotating the button that secures them.
Brand: Mora of Sweden
Type of knife: bushcrafting knife
Type of steel: Carbon steel
Best use: bushcraft
Blade length: 8.9 cm
Blade shape: clip point
Length: 20.5 cm
Handle length: 11.7 cm
Blade height: 2.3 cm
Blade thickness: 3.2 mm
Way of sharpening: scandi
Type of edge: plain edge
Finish blade: polished
Colour: black, grey, silver
Weight: 102 gram
Material handle: rubber
Material sheath: plastic
Country of origin: Sweden
Warranty on materials and manufacturing defects: lifetime
Our latest Episode!: “Knife VS AXE // What do you choose.”