Fast delivery for H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Wholesale to USA

Fast delivery for
 H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Wholesale to USA

Short Description:

H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19. AISI H-13 tool steel is characterized by: Good resistance to abrasion at both low and high temperatures High level of toughness and ductility Uniform and high level of machinability and polishability Good high-temperature strength and resistance to t...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    The company upholds the philosophy of "Be No.1 in quality, be rooted on credit and trustworthiness for growth", will continue to serve old and new customers from home and overseas whole-heatedly for Fast delivery for H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Wholesale to USA, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!


    H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19.

    AISI H-13 tool steel is characterized by:

    • Good resistance to abrasion at both low and high temperatures

    • High level of toughness and ductility

    • Uniform and high level of machinability and polishability

    • Good high-temperature strength and resistance to thermal fatigue

    • Excellent through-hardening properties

    • Very limited distortion during hardening

    In
    steel H13, the molybdenum and vanadium act as strengthening agents. The
    chromium content assists die steel H-13 to resist softening when used
    at high temperatures. H-13 die steels offers an excellent combination of
    shock and abrasion resistance, and possesses good red hardness. It is
    capable of withstanding rapid cooling and resists premature heat
    checking. Tool Steel H13 has good machinability, good weldability, good
    ductility, and can be formed by conventional means.

    Due to H13
    tool steel excellent combination of high toughness and fatigue
    resistance, AISI H13 hot work tool steel is used more than any other
    tool steel in tooling applications.

    1. Common H13 Tool Steel Related Specifications

    Country USA German Japan
    Standard ASTM A681 DIN EN ISO 4957 JIS G4404
    Grades H13 1.2344/X40CrMoV5-1 SKD61

    2. H13 Tool Steel Chemical Composition

    ASTM A681 C Mn P S Si Cr V Mo
    H13 0.32 0.45 0.2 0.6 0.03 0.03 0.8 1.25 4.75 5.5 0.8 1.2 1.1 1.75
    DIN ISO 4957 C Mn P S Si Cr V Mo
    1.2344 /X40CrMoV5-1 0.35 0.42 0.25 0.5 0.03 0.02 0.8 1.2 4.8 5.5 0.85 1.15 1.1 1.5
    JIS G4404 C Mn P S Si Cr V Mo
    SKD61 0.35 0.42 0.25 0.5 0.03 0.02 0.8 1.2 4.8 5.5 0.8 1.15 1.0 1.5

    3. AISI H13 Steel Mechanical Properties

    Properties

    Metric Imperial
    Tensile strength, ultimate (@20°C/68°F, varies with heat treatment) 1200 – 1590 MPa 174000 – 231000 psi
    Tensile strength, yield (@20°C/68°F, varies with heat treatment) 1000 – 1380 MPa 145000 – 200000 psi
    Reduction of area (@20°C/68°F) 50.00% 50.00%
    Modulus of elasticity (@20°C/68°F) 215 GPa 31200 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30

    4. Forging of H13 Tool Steel
    Heating for forging must be done slowly and uniformly. Soak through at
    1900°-2000°F and reheat as often as necessary, stopping work when the
    temperature drops below 1650°F. After forging, cool slowly in lime,
    mica, dry ashes or furnace. H-13 should always be annealed after
    forging.

    5. Heat Treatment for H13 Tool Steels

    • Annealing

    Heat
    slowly to 1550°-1650°F, hold until entire mass is heated through, and
    cool slowly in the furnace (40F per hour) to about 1000°F, after which
    cooling rate may be increased. Suitable precautions must be taken to
    prevent excessive carburization or decarburization.

    • Stress Relieving

    When
    desirable to relieve the strains of machining, heat slowly to
    1050°-1250°F, allow to equalize, and then cool in still air (Strain
    Relieving). Â

    • Preheat Prior to Hardening

    Warm slightly before charging into the preheat furnace, which should be operating at 1400°-1500°F.

    • Hardening

    H13
    tool steel is a steel having very high hardenability and should be
    hardened by cooling in still air. The use of a salt bath or controlled
    atmosphere furnace is desirable to minimize decarburization, and if not
    available, pack hardening in spent pitch coke is suggested. The
    temperature employed is usually 1800°-1850°F, depending on size section.

    • Quenching

    Quench
    in still air or dry air blast. If complicated forms are to be hardened,
    an interrupted oil quench can be used. Quench part in oil and remove
    from bath when it just loses its color (1000°-1100°F). Finish cooling to
    below 150°-125°F in air, then temper immediately.

    • Tempering

    Tempering
    practice may vary with size and application, but is usually performed
    in the range of maximum secondary hardness or higher. Double tempering
    is recommended. The results below is H13 that was air quenched from
    1800°F and tempered for 4 hours at various temperatures. The results may
    be used as a guide, keeping in mind that parts of heavy section or mass
    may be several points lower in hardness.

    6. Application of AISI H13 Tool Steel

    • As Tools for Extrusion

    Part Aluminium, mag­nesium alloys, HRC Copper al­loys HRC Stainless steel HRC
    Dies, Backers, die-holders, liners, dummy blocks, stems 44-50 43-47 45-50
    41-50 40-48 40-48

    Austenitizing temperature

    1,870-1,885°F 1,900-1,920°F
    (1,020-1,030°C) (1,040-1,050°C)
    • As Plastic Molding Tool Steel

    Part Austenitizing temp. HRC
    Injection molds Compression/ transfer molds 1,870-1,885°F (1,020-1,030°C) 50-52
    Tempering 480°F (250°C)
    • Other Applications

    Applications Austenitizing temp HRC
    Severe cold punching, scrap shears 1,870-1,885°F 50-52
    (1,020-1,030°C)
    Tempering 480°F (250°C)
    Hot shearing 1,870-1,885°F
    (1,020-1,030°C) 50-52
    Tempering 480°F (250°C) or
    1,070-1,110°F 45-50
    (575-600°C)
    Shrink rings (e.g. for cemented carbide dies) 1,870-1,885°F 45-50
    (1,020-1,030°C)
    Tempering 1,070-1,110°F
    (575–600°C)
    Wear-resisting parts 1,870-1,885°F Core
    50-52
    Surface
    ~1000HV1
    (1,020-1,030°C)
    Tempering 1,070°F (575°C)
    nitrided

     

    If
    there are any queries about AISI H13 tool steel for hot working
    applications, please feel free to leave a comment below. And welcome
    enquiry of AISI H13 tool steel, we are professional and reliable
    supplier  for prime H13 tool steel materials.

  • Previous:
  • Next:



  • 6pcs/set 90 Degrees Five Blade Plating Titanium High Quality
    รับส่วนลด คลิ๊ก : http://best.chickensforsale.us/1KJ87

    6pcs/set 90 Degrees Five Blade Plating Titanium High Quality Steel 1/4 Inch Hexagonal Shank Five Edge Chamfer Countersink Set 6mm 8mm 10mm 12mm 16mm 19mm – Intl
    คุณผู้หญิงกำลังหาคำแนะนำสินค้า 6pcs/set 90 Degrees Five Blade Plating Titanium High Quality Steel 1/4 Inch Hexagonal Shank Five Edge Chamfer Countersink Set 6mm 8mm 10mm 12mm 16mm 19mm – Intl เพื่อช่วยเหลือ อยูใช่หรือไม่ ถ้าใช่คุณมาถูกที่แล้ว เรามีเครื่องใช้ ที่คุณผู้ชายต้องการ เรามีร้านค้า สินค้า 6pcs/set 90 Degrees Five Blade Plating Titanium High Quality Steel 1/4 Inch Hexagonal Shank Five Edge Chamfer Countersink Set 6mm 8mm 10mm 12mm 16mm 19mm – Intl ราคาดีที่สุด แนะนำให้นายท่าน 6pcs/set 90 Degrees Five Blade Plating Titanium High Quality Steel 1/4 Inch Hexagonal Shank Five Edge Chamfer Countersink Set 6mm 8mm 10mm 12mm 16mm 19mm – Intl
    High carbon steel chamfer cutter countersink set.Performed well in chamfering, deburring, bore-hole.Titanium plating, which is well protected against rust.Suitable for punching in wood, plastic and other sheet materialin low hardness.6 sizes(6mm, 8mm, 10mm, 12mm, 16mm, 19mm) in one set, whichmeet your different needs perfectly.more UN355HLAA4W45ZANTH-10485587 เครื่องใช้ ของตกแต่งบ้าน อุปกรณ์ปรับปรุงบ้าน …

    ค้นหายอดนิยม : 6pcsset, 90, Degrees, Five, Blade, Plating, Titanium, High, Quality, Steel, 14, Inch, Hexagonal, Shank, Five, Edge, Chamfer, Countersink, Set, 6mm, 8mm, 10mm, 12mm, 16mm, 19mm, Intl, 6pcs/set 90 Degrees Five Blade Plating Titanium High Quality Steel 1/4 Inch Hexagonal Shank Five Edge Chamfer Countersink Set 6mm 8mm 10mm 12mm 16mm 19mm – Intl

    6pcsset #90 #Degrees #Five #Blade #Plating #Titanium #High #Quality #Steel #14 #Inch #Hexagonal #Shank #Five #Edge #Chamfer #Countersink #Set #6mm #8mm #10mm #12mm #16mm #19mm #Intl #6pcs/set 90 Degrees Five Blade Plating Titanium High Quality Steel 1/4 Inch Hexagonal Shank Five Edge Chamfer Countersink Set 6mm 8mm 10mm 12mm 16mm 19mm – Intl

    6pcs/set 90 Degrees Five Blade Plating Titanium High Quality Steel 1/4 Inch Hexagonal Shank Five Edge Chamfer Countersink Set 6mm 8mm 10mm 12mm 16mm 19mm – Intl pantip ราคา true review ดีไหม รีวิว สเปค



    The InductoForge® Modular Billet Heating System offers flexibility and efficiency with its individually controlled (500Hz – 6000Hz) power modules. The flexible modular design results in a much finer and more accurate control of the billet temperature.

    iHAZ™ Temperature Profile Modeling Software enables advanced temperature control of the billet heating process. iHAZ™ software allows you to customize a billet temperature profile (Induction Heat Affected Zone) to best suit your billet or bar heating application. It can also generate the optimum-running parameters and set points for Standby and Rapid Start which are stored as a recipe in the billet heater’s PLC.

    For additional information, visit http://www.inductoheat.com/inductoforge-modular-induction-heating-system.php

    This video transmission, including any attachments, may contain information that is proprietary, privileged and/or confidential to Inductotherm Group and is intended exclusively for the person(s) to whom it is addressed. Any use, copying, retention or disclosure by any person other than the intended recipient or the intended recipient’s designees is strictly prohibited. If you are not the intended recipient or their designee, please notify the sender immediately by return e-mail and delete all copies.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key